Question about Cars & Trucks
May be faulty temp sensor ,,,,, or dust gathering on it giving false reading ,,,, you need to get a diagnostic reading to check internal temp readings and see if they are too low for the real temp of your area
Posted on Nov 23, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: A/C BLOWER WILL NOT TURN
The problem on your vehicle is .
THE BLOWER MOTOR RESISTOR..
when they come damaged the blower motor not work. or don't stop working.
just REPLACE the RESISTOR. and you will fix that problem.
I'm a mechanic for a few years. and have autorepair software
On my PC.
OK... I hope with this information you will fix the problem.
Thank's for use fixya.
Posted on Jul 25, 2008
SOURCE: climate control not working
I had the same problem on my 2004 GMC Yukon XL.
Still under warranty the shop was able to reprogram the climate control system and tell what was wrong rather quickly with a OBD computer.
That’s when they found both of the climate control (driver and passenger) side actuators were bad and the control unit that tells the actuators where they should be was also bad.
The truck was in the shop with most all the dash, seats, consol, and steering wheel out for a week. The cost was over $1200.00.
That has seamed to fix the problem. Good Luck.
Posted on Jan 14, 2009
replace the blower motor speed control module, that is the only cause of this problem that I know of, and u are about the 20 post for this issue that I have read, it has fixed the other ones..
Posted on Feb 26, 2009
I'm assuming the problem is the blower motor isn't coming on or working. 1st, check the fuse. 2nd, remove the glove box or pull the 2 tabs that act like stops when it's open ( the glove box will open out further) and you'll see the power plug connector for the blower unit. Turn on the blower through the climate control (heat, A/C, or whatever) and wiggle the connector to see if the blower turns on. If starts working, then an easy solution is pull the connector off and gently press the prongs together or inward. Then carefully reconnect with damaging the prongs. This worked for 96 Mark VIII due to the fact the prongs were not "seating" correctly in the female connector. It's been about 2 years since I did this and the connection is still good. If wiggling the plug doesn't work, pull the plug, turn on the climate control (heat, A/C), and check for voltage to the plug. That's about all I can help with.
Posted on May 28, 2009
Tips for a great answer:
Feb 23, 2015 | Nissan Cars & Trucks
Apr 24, 2017 | 2007 Nissan Quest 3.5 Minivan
Mar 18, 2013 | Cars & Trucks
Jan 17, 2013 | 1998 Nissan Maxima
Dec 11, 2012 | 1999 Nissan Quest
Oct 30, 2011 | 1997 Lincoln Continental
Dec 25, 2010 | 1995 Nissan Maxima
Dec 04, 2009 | 2001 Nissan Quest
Dec 22, 2008 | 2001 Nissan Quest
May 11, 2017 | 2005 GMC Yukon Denali
26 people viewed this question
Usually answered in minutes!