Question about 2006 Saturn ION

Open Question

2007 saturn ion 2.4l p0300 - 2006 Saturn ION

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 35 Answers

SOURCE: my 2005 saturn ion has

Generally I have found that when this code or one ending in another number (example P0304) can mean that the coil pack is bad. When I get the code that's what I usually had to replace. Here is a website that may help you out ....

http://www.obd-codes.com/p0300

Posted on Jan 04, 2009

  • 14 Answers

SOURCE: my check engine light on my 07 saturn ion keeps

1174 is a lean code, and would have to been set first because it will not set when the 0300 is there. 0300 is a random misfire, because it read after the lean code, it was probably caused by the lean condition. 1st check for vacuum leaks from hoses or intake gaskets, you cal listen for a hissing sound, or spray carb cleaner around intake systems, a change in rpm will be noticed when spraying near a vac leak. other probable causes are the upstream 02 sensor, map sensor, or fuel delivery problems. does the vehicle idle porly, or does it miss at the top end?

Posted on Dec 20, 2009

  • 49 Answers

SOURCE: where is the transmission drain plug located in a 2007 saturn ion

There is some sealed units with no drain or fill. Or it could be on the driver side bottem of the transmission but is not accessable because it is too close to the frame. Hope you find it and its accessable.

Posted on Apr 20, 2010

  • 27 Answers

SOURCE: I need to know how to replace the side mirror on 2007 Saturn Ion

You may be lucky and just have to remove the top section just behind the mirror. Usually you have to remove the door panel to access the bolts.

Posted on Apr 30, 2010

  • 19 Answers

SOURCE: 2006 saturn Ion have

replace the map the manifold absolute pressure sensor

Posted on Oct 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the auto trans. fluid capacity of a 2007 saturn ion


What is the fluid capacity for a 2007 Saturn Ion transmission - Fixya

www.fixya.com/cars/t25426927-fluid_capacity_2007_saturn_ion
  1. Cached
Feb 14, 2015 - Total capacity is 8.2quarts if it's a 4cyl. and 11.5 if it's 6. if it's automatic use any of these (syntec is good) Castrol Import Multi Vehicle ATF Castrol ...
auto trans fluid capacity of 2007 saturn ion Google Search

Mar 17, 2017 | Saturn Cars & Trucks

2 Answers

I put a cold air intake on my 2007 saturn ion 2.2. now i have codes poping up.how do i fix these without putting my factory air box back on: code p0102,p0101,p0300,p0171


The P0102 means Mass or Volume Air Flow Circuit Low Input
The P0101 means Mass or Volume Air Flow Circuit Range/Performance Problem
The P0300 means Random/Multiple Cylinder Misfire Detected
The P0171 means System too Lean (Bank 1)
_________________
Ktag ecu programmer

Sep 25, 2012 | 2007 Saturn ION-2 Quad Coupe

1 Answer

Location on fuse box on 2007 saturn ion


On this website you find fuse box diagram diagram and description for Saturn ION (2007)

Saturn ION 2006 2007 fuse box diagram Auto Genius

May 20, 2012 | 2007 Saturn Ion

1 Answer

I need to know how to replace the side mirror on 2007 Saturn Ion


You may be lucky and just have to remove the top section just behind the mirror. Usually you have to remove the door panel to access the bolts.

Apr 28, 2010 | 2007 Saturn ION-2 Quad Coupe

2 Answers

My check engine light on my 07 saturn ion keeps coming on and gives the code p1174 and p0300 what do they mean and how do i fix


1174 is a lean code, and would have to been set first because it will not set when the 0300 is there. 0300 is a random misfire, because it read after the lean code, it was probably caused by the lean condition. 1st check for vacuum leaks from hoses or intake gaskets, you cal listen for a hissing sound, or spray carb cleaner around intake systems, a change in rpm will be noticed when spraying near a vac leak. other probable causes are the upstream 02 sensor, map sensor, or fuel delivery problems. does the vehicle idle porly, or does it miss at the top end?

Dec 19, 2009 | 2007 Saturn ION-2 Quad Coupe

1 Answer

No heat in saturn ion 2


check and make sure there is fluid in your radiator

Feb 28, 2009 | 2007 Saturn ION-2 Quad Coupe

1 Answer

My 2005 saturn ion has a p0300. i changed the ICM and it worked for a while but the same problem started again.


Generally I have found that when this code or one ending in another number (example P0304) can mean that the coil pack is bad. When I get the code that's what I usually had to replace. Here is a website that may help you out ....

http://www.obd-codes.com/p0300

Jan 04, 2009 | Saturn Ion Cars & Trucks

Not finding what you are looking for?
2006 Saturn ION Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...