Question about Ford Probe

1 Answer

Why dies my 1990 ford probe die whenever i stop

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 208 Answers

I wold clean the TB Throttel Body- first open the hatchback on the drivers side if i can recall behind the carpet next to the water bottle for the rear window, there should be a red button depress the button see if it acts write then. if not disconect the neg side battery unplug the wires clean the terminels conect the wires reconect the battery and see if that helps. the button is a emergency shut off switch in case of a reck or fender bender.

Posted on Nov 23, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: ford probe dtc 181/211/412/411 and 521

IAC Valve needs replaced

Posted on Sep 27, 2008

  • 1 Answer

SOURCE: 1991 ford probe

duck tape on the air intake. I just fixed mine. There is a crack on the intake that lets too much air in when you put it in drive that makes the car stall. Try it it works.

Posted on Dec 24, 2008

honeymokey
  • 3113 Answers

SOURCE: my 1990 sillhouette kills at a stop sign

Three speed automatic? If so the TCC solenoid is bad.in the transmission. Its under the side cover on the driver side. You can unplug wire connector going to front of transmission so you can drive it until you get it fixed. It will use more gas due to no torque converter lock up.

Posted on May 23, 2009

  • 25 Answers

SOURCE: my newly installed 1990 ford festiva fuel pump DIES

defective new pump
Mike

Posted on Jul 08, 2009

  • 5 Answers

SOURCE: dies after starting

probably the ign. module in your distributor, it gets too hot over time and starts to short out internally, ive went through 3 in my slightly modded KLZE.

Posted on Aug 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 1990 Ford Probe V6. When it is hot out and have driven for a while the engine just dies and the check engine light comes on, sometimes I can start it back up, but most times I have to let it cool...


RELACE THE MOUNTING PLATEFOR THE COIL PACKS. THE PLATE HEATS UP AND BREAKS CONECTION AND WHENIT COOLS IT CONTRACTS AND IS MAKE CONECTION AGINE

Aug 02, 2011 | 1990 Ford Probe

1 Answer

Would shut off for no reason, then finally will stopped at a convenience store went to start to drive off, would not start. After many attempts and replacing various parts car still is sitting, no spark...


I pulled up to a convenience store and my 1990 ford probe died and had no power to anything, It ended up being 80 amp fuse under hood main fuse bolted in black with clear top, changed it worked fine after that. hope this helps

Sep 07, 2010 | 1990 Ford Probe

1 Answer

Okay well when im driving down the road


sounds like the alternator is going bad. I had the same problem in a 94' Ford Probe. I replaced the alternator and it ran perfect. Hope this helps

Feb 21, 2010 | 1995 Mitsubishi Eclipse

1 Answer

My 1990 honda accord dies out when I come to a stop sign


fuel injector cleaner and some good gas,then maybe a tune-up

Oct 03, 2009 | 1999 Ford F150 Regular Cab

1 Answer

Engine dies on a complete stop and battery ligt turns on.


change the idle air control solenoid. very common for this to stall the car at idle. once going it is not in use. best of luck

Aug 07, 2009 | 1990 Acura Integra Hatchback

1 Answer

1990 Ford Probe idles very roughly while in gear


You might try a new throttle position switch, they're easy to replace and not too expensive .

Jun 10, 2009 | 1990 Ford Probe

1 Answer

Rough idle


look on the back of your accordian like air intake duct...you will find a small crack...hard to see unless you flex it or at least look carefully....electrical tape will work as a temporary fix. A new flexible air intake hose....which runs from the air flow control box on the fender to the throttle body on top of the engine is about $100....but you can get one from a wrecker for about 5.

Jun 03, 2009 | 1995 Ford Probe

2 Answers

TRUCK WILL NOT IDLE, DIES WHEN I COME TO A STOP


Those Fords Have Problems With The IAC(Idle Air Control Valve) On Top Of Intake By Throttle Body. It Might Even Be Making Some Weird Noises? If Not Check Timing, And Fuel Preasure.....Check For Vacumme Leaks. Good Luck

May 02, 2009 | 1990 Ford F150

1 Answer

1991 ford probe


duck tape on the air intake. I just fixed mine. There is a crack on the intake that lets too much air in when you put it in drive that makes the car stall. Try it it works.

Nov 23, 2008 | 1990 Ford Probe

1 Answer

1990 ford probe won't start


ignition relay or fuel pump relay that is all I recall working on those years back good luck hope that helps you!

Sep 23, 2008 | 1990 Ford Probe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...