Question about Isuzu Rodeo
Start the heater with the fan on lift the hood locate the blower motor and give it a tap if the blower starts the motor is getting worn . If it don't come on I would say the switch is worn
Posted on Nov 22, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
common problem, check under dash by the gas pedal if control arms are muving went selecting from ac to heat cuz this it is the control for the vents to go from ac to heat and to defrost.
Posted on Feb 23, 2009
you need to change drivers side temp door actuator then disconnect battery for 5 seconds and reconnect after changing the part, turn key on for 60 seconds with touching heater control to allow actuator to program and then it will work.
Posted on Sep 19, 2009
SOURCE: no air coming out of the vents
It sounds like the heater motor may not be operating. When you switch the heater fan on can you hear the motor running? If not then it may have blown the heater fan fuse, check the fuse's and then try it again. If the fuse is ok then it could be a faulty switch or fan motor.
Posted on Apr 02, 2010
Testimonial: "Thank you so much. I appreciate the response."
OK, a vacuum controlled blend door is the problem. Fig. Fig. 1: Plenum door vacuum motors
Fig. Fig. 1: Plenum door vacuum motors
Posted on Oct 29, 2010
Tips for a great answer:
Nov 22, 2012 | Cars & Trucks
Sep 12, 2012 | 2009 Chevrolet Silverado 1500
Jul 27, 2012 | 1997 Isuzu Rodeo
Apr 02, 2010 | 2004 Chevrolet TrailBlazer
Jan 15, 2010 | 1993 Isuzu Rodeo
Sep 19, 2009 | 2004 GMC Yukon
Jan 19, 2009 | 2004 Suzuki Verona
Jan 18, 2009 | 1997 Chevrolet K1500
Dec 05, 2008 | 1999 Jeep Grand Cherokee
111 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: