Question about Cars & Trucks

1 Answer

How maximum increase horse power output force of inductiom motor of 2hp using loadwheel or flywheel and how much hp force it can be increase. Plz describe detail.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 44,335 Answers

Induction motors develop max hp at the set RPM and current setting according to the windings in the motor. The use of flywheels in the system help the motor to hold steady rpm when a sudden load is applied as the stored energy in the spinning flywheel overcomes the sudden draw of power and stops the loss of rpm's . If you want more HP get a bigger motor.. ( HP is now an irrelevant term as it not an accurate to describe the motor's capacity . The definition is now torque or the ability to turn a shaft That is why older motors were bigger and used more current than the smaller motors that produce more torque for less current

Posted on Nov 23, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't find horse power information for the 1987 Ninja Zx250R that I owned for 20 years. I would love to know the horse power and all of the specs. I can't find anything online for pre 1988 models???


Very easy to find, here are the main specs for the 1st Gen 250 Ninja.
Power output was reported as 37.4 hp @ 11000 rpm and the engine had a 14,000rpm red line. Top speed was around 95 mph. However this model had a fairly short life and only lasted for two years before it was replaced by the 3rd generation of 250cc Ninjas

Jun 08, 2017 | Cars & Trucks

1 Answer

What is the power outputs on isuzu kb260 petrol engine


wow , no years stated, are you kidding?
flywheel Horse power or KW?
what country?, your countries smog rules dictates HP possibles.

why not google that
or look it up in the WIKI
here ill do that for you.

this car?????

http://en.wikipedia.org/wiki/Isuzu_Faster

and what engine, there are many
here they all are, pick one.?
http://en.wikipedia.org/wiki/List_of_Isuzu_engines

post year , country and engine size, and we get facts.
or ask Isuzu
or read the FSM
or read the operators guide in the glove box , it says so.

Aug 28, 2014 | Isuzu Cars & Trucks

1 Answer

I have an 88 ford f150 2wd longbed with an efi 351w motor what mods will increase horse and what would be good to do to get more out of the motor and tranny


quickest increase is a properly fitted and tunes turbo . Talk to a turbo shop to get what a tirbo can give you in extra hp.

Apr 15, 2014 | Cars & Trucks

2 Answers

I am looking to increase my lil 1996 xlt does rangers horse power it is a v6 4L auto and I was gonna put in a cold air intake was wondering if this us a good idea or any other sujestions on what to so I...


Cold air will help and free flowing exhaust. Headers and duals would give you the increased HP you are looking for. Make sure all sensors are reinstalled on any mods.

Aug 11, 2011 | Ford Ranger Cars & Trucks

1 Answer

What is the maximum safe flywheel horsepower for a 2008 mustang gt? I would like to put down 425rwhp... which equates to about 500 figuring 15% drivetrain loss.


Your question is a professional one so I will have to have more information to answer you other than:
The factory flywheel is not rated for more than 300 hp.
There are professionally built automatic transmissions costing thousands of dollars that are made to deal with this kind of horsepower. With your goal of 425 at the rear wheels you will need to beef up the entire drive train. This can include the transmission - flywheel - drive shaft and u joints - rearend - drive axles and lug bolts and even the wheels.

Please purchase items specifically for your horse power and -- use a transmission blanket - and a safety loop for the transmission.

Please take your vin# to the dealer and ask them for the factory specs - they will share them - however if you bought the car used - you are best to assume the items mentioned are less than perfect and perhaps needs to be replaced because there is no guarantee they are the factory items.

Also - remember to put larger brakes on the car - as the bullet you're building is going to need to stop too.

Best of it

Jan 28, 2010 | 2008 Ford Mustang

1 Answer

I want more horse power without having to due an engine swap whats the best way to start everythings stock


start with intake manifold cold air intake not a short ram intake performance spark plugs wires and distributor cap, headers exhaust system not a tip.
make sure you have an LSD transmission then pull apart the motor mainly the head change out valves, spring retainers, and springs. new camshafts make sure you buy the springs and spring retainers before you put in the new cams. if you have the money to bore out the block it be better to take your block clean it up and put darton sleeves then buy a new crankshaft new psitons and rods with new rings all of this will cost a good deal but will increase performance a turbo should be the last thing you do increase the motor HP and max it out then put in a turbo but ensure your car is sleeved darton sleeves are the best never had a problem. i used to own a 2000 honda civic si i pushed 239 HP staright motor B16A2 motor. good luck any other questions let me know

Nov 03, 2009 | 1994 Honda Civic Del Sol

1 Answer

Improve towing


are you looking at improving fuel econ or power ?

fuel econ can be increased by 3-5 mpg by installing a torque converter lock up control gale banks makes a great one but there are others

short bursts of added power can be added by a propane injection system there's a bunch of mfg's of these just google it and you'll see

these are the lowest cost things i know of

of course for more money there are belt driven blower kits you can add
these add 20 to 100 hp and can cost 1200 to 4500 bucks depending on what kit you want

Ohh and another way low cost way to increase both MPG and Power is to increase your exaust pipe size to 4 inches Plus++++ but be carefull
ck your local laws about mod pipes on trucks there not legal everywhere

Mar 30, 2009 | 1993 Ford F350

1 Answer

The blower for my heater only seems to work on 1 speed.F350diesel


Change out the resistor for the fan motor it is next to the fan motor on a red plate in the air box

Dec 08, 2008 | 2001 Ford F350 Super Duty SuperCab

1 Answer

Changing heads for more HP


if you use the mark vii heads u will boost the compression to almost 9.5 which will increase ur hp but changing cams as well will give u even more hp

Nov 14, 2008 | Pontiac Firebird Cars & Trucks

1 Answer

2000 cherokee wont start


Timing The ignition system on your car has to work in perfect concert with the rest of the engine. ­The goal is to ignite the fuel at exactly the right time so that the expanding gases can do the maximum amount of work. If the ignition system fires at the wrong time, power will fall and gas consumption and emissions can increase.
When the fuel/air mixture in the cylinder burns, the temperature rises and the fuel is converted to exhaust gas. This transformation causes the pressure in the cylinder to increase dramatically and forces the piston down.the spark should occur before the piston reaches the top of the compression stroke, so by the time the piston starts down into its power stroke the pressures are high enough to start producing useful work.

Aug 14, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...