Question about 2004 Honda Pilot

1 Answer

Pcv valve

Where the PCV valve is located?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 20,706 Answers

See FSM?
open hood
touch valve cover. with finger,
now see 2 hoses. on VC. about 1inch OD.
one is PCV fresh air.
and one is PCV valve hose. that hose. the one with the PCV check valve device on the end.

Posted on Nov 23, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: pcv valve location

more than likely IN the rocker cover.

Posted on Mar 15, 2010

SOURCE: PCV valve location

HERE IS A DIAGRAM OF WHERE THE PCV VALVE IS LOCATED.4395af1.gif

Posted on Sep 21, 2008

blueextc3221
  • 15935 Answers

SOURCE: PCV valve for 2004 Hona CRV

PCV Valve Operation: 0900823d80049deb.jpgA vacuum-controlled metering device that regulates the flow of crankcase fumes in the positive crankcase ventilation system by allowing more flow at high speed than at low speed, and acts as a system shutoff in case of engine backfire to prevent an explosion in the crankcase.
Depending on your engine size, the PCV is a different style and slightly different location.

Usually they are mounted in a hole on your valve cover.... connected by a vacuum tube.
Some are mounted with threads into the engine block (usually by the oil filter)

On the '04 Crv - it is nearly inaccessible behind the AC compressor and beneath what looks like an old vacuum advance. Most PCV valves today do not need to be replaced, unless there is actual valve failure, which I have not seen happen. I would not be concerned about replacing it.

Thanks for using FixYa - a FixYa rating is appreciated!!

Posted on Feb 21, 2009

Molson02536
  • 3854 Answers

SOURCE: location of a pcv valve on a 2005 honda accord

You have to remove the "ignition cover", ie. the plastic cover that says 3.0L, you will see a hose coming from the passenger front corner of the intake manifold, that is one of the two PCV hoses, the other one is on the rear driver corner of the intake manifold.

Follow the first hose downwards and you will find the PCV valve just below some other tubings, it sits fore/aft, i.e. lengthwise to the car. I hope this helps good luck

Posted on Apr 08, 2009

philschneide
  • 448 Answers

SOURCE: where is the pcv valve located on a 1999 honda

Under hood, center, upper engine area, top of engine, MOUNTED IN THE VALVE COVER (probably has a rubber hose connected to it, coming from a place further back toward the firewall) It usually is removed by simply pressuring it upward out of the rubber gromet that it resides in.
Hope this lets you find it.

Posted on Oct 27, 2009

Testimonial: "u guys are great! I'll be back with more stuff. hopefully one day I can be among you answering these questions! thanks a million!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pcv location ford escape 2010 2.5 gas engine


The PCV valve is located under the intake manifold on the non-hybrid 2.5L engine. The intake manifold MUST be removed in order to service the PCV valve.
The PCV valve sits in the crankcase vent oil separator.

May 16, 2014 | 2004 Ford Taurus

1 Answer

Location of pcv valve on 2008 ford taurus 3.5


On 3.5L engines, the PCV Valve is located on the rear valve cover (see pictures bellow). Please note: the PCV valve must be replaced if it's removed. Access to the valve is easier if you remove the upper intake manifold. However, this is not absolutely necessary and if you are already a little mechanically inclined you can do it the way you would replaced any other PCV valve.

    -A 19mm open wrench will make your life a lot easier if the PCV valve is a bit tight. It is in an awkward spot to apply pressure.

    -Disconnect the electrical connector from the valve. There is a small pin or locking device on the wire that you will have to slightly depress for the connector to release.

    -Disconnect the hose from the valve and turn the hose clockwise so that you have a bit of room to work with.

    -Turn the PCV valve counterclockwise and remove from the valve cover. Pay close attention to the position of the valve at the point when it is to be removed. The new PCV valve will go in at that same position. Why is this important? It is possible to install the PCV valve facing in the opposite direction. Once the PCV valve in and locked it in place, it damages the locking mechanism. Therefore, if you remove it you will have to throw it away and purchase a new one.

    -You just saved $130 - $150 to have the PCV replaced at the dealership...

location-pcv-valve-2008-ford-taurus-3-5-cgnwdhiy0mxwbb3xg5zhzgxj-5-0.jpg

Apr 07, 2013 | 2008 Ford Taurus SEL

1 Answer

Changing pcv valve in 97 chevy lumina


PCV VALVE LOCATED IN THE FRONT VALVE COVER.JUST PULL PCV VALVE OUT VALVE COVER. THEN YOU PULL PCV OUT OF THE END OF HOSE THEN INSTALL THE NEW ONE. FOR THE 3.8 ENGINE REMOVE THE TOP FUEL INJECTOR COVER.DISCONNECT THE ELECTRICAL CONNECTOR FROM MAP SENSOR AND UNCLIP THE MAP SENSOR FROM THE PCV VALVE ACCESS COVER AND ROTATE IT COUNTERCLOCKWISE TO REMOVE IT.TO REPLACE THE VALVE PULL THE PCV AND O RING ASSEMBLY FROM THE INTAKE MANIFOLD NOTING ITS INSTALLED POSITION AND DIRECTION. MAKE SURE WHEN YOU BUY NEW PCV VALVE TAKE OLD PCV VALVE WITH YOU SO YOU WILL GET THE RIGHT ONE.THAT WILL SAVE YOU TIME AND FUEL.

Dec 26, 2010 | 1997 Chevrolet Lumina

1 Answer

Changing PCV valve


you pcv valve should be located on the top or around the intake on top of the engine. It is covered by a little pcv valve rubber hose...it is easy to identify because it is similar to a radiator hose but a lot smaller...no where near the size of a radiator hose...but when located, the pcv valve just pulls out and to check for it being bad, shake it and it should sound like something loose inside the pcv valve (thats a good pcv valve) but what they look like, they should be a silver looking color with a small little neck on it

Nov 21, 2009 | 1990 Buick Reatta

1 Answer

Front PCV Valve on chrysler town and country


1930013.gif
PCV valve location-2.4L engine

3a8cecf.gif
PCV valve location-3.3L and 3.8L engines

Nov 13, 2009 | 1999 Chrysler Town & Country

2 Answers

Location of pcv valve on 03 ford focus


http://www.focushacks.com/images/pcv.jpg
Here's a picture to locate it..
So, when looking at the engine from above, on the right of the exhaust.

Procedure to replace it
1) Lift and support the front end of your car, or drive up on ramps
2) Get under the front of your car. The PCV Valve is located behind the exhaust manifold, a few inches below the valve cover.
3) Push up on the PCV valve to pop it out of the tube, or pull. You can get it out of the rubber tube with some effort.
4) Remove the rubber elbow from the top of the PCV valve. This can be re-used if it's not squishy. It can also be replaced cheaply.
5) Put the elbow on the new PCV Valve
6) Re-attach the elbow to the PCV tube
7) Push the new PCV valve back down into the large rubber tube

Sep 25, 2009 | 2003 Ford Focus

3 Answers

Where can I find the pcv valve location


please rate as fixed if this helps.

4 cylinder

SECTION 303-08: Engine Emission Control 2003 Escape Workshop Manual
REMOVAL AND INSTALLATION Positive Crankcase Ventilation (PCV) Valve —2.0L Zetec Removal and Installation
  1. Remove the PCV valve.
    • Remove the crankcase ventilation hose from the PCV valve.
    • Remove the PCV valve from the grommet by turning the valve counter-clockwise
f21fec7.gif
------------------------------

Apr 12, 2009 | 2005 Ford Escape

2 Answers

Location of a pcv valve on a 2005 honda accord


The general location mentioned is correct. However, unlike most PCV valves there is no hose connection to the valve. There is a single bolt that attachs the PCV valve to the valve cover. Loosen the bolt, then remove the PCV valve from the valve cover. It is inserted inside the valve cover. Very different from most PCV valves as far as attachment method to the valve cover.

Apr 08, 2009 | 2005 Honda Accord

1 Answer

86 buick regal pcv hose is loose


3/8 fuel line is heavy enough to use,and the pcv valve is located in the valve cover.

Feb 17, 2009 | 1986 Buick Regal

1 Answer

1998 Ford Explorer sport 4.0L 4x2 PCV Valve Location


the pcv is located on the rear(firewall) of the drivers side valve cover.turn counterclockwise and pull to remove be careful there are 2 small tabs inside the pcv hole in the valve cover(can feel with small finger) this is to hold valve in place so it wont leak.if you have a oil leak at the pcv a quick fix is to put a small amount of silicone around the pcv o-ring and install.wait hours for silicone to set up.

Sep 25, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
2004 Honda Pilot Logo

Related Topics:

457 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...