Question about Cars & Trucks

1 Answer

Seat adjuster The metal bar to move the drivers seat back and forth has come away please can you tell me how to fix the bar back. It is a vauxhall corsa 04 many thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 90 Answers

Most are not fixable, made from stamped metal. It is better to purchase another seat from the junkyards. Call around first. Also, it does not have to be the same make and model as most seat are very similar.

Posted on Nov 22, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 15 Answers

SOURCE: Power driver seat will not adjust forward or back.

My intuition tells me that the 6 way power seat track forward / reverse motor is bad. Sometimes you can replace just the one motor but most often a whole new power seat track is the only way to repair. It is not too bad to replace but the seat will have to be removed from the car and placed upside down to access the track assy. There are 2 bolts in the front of the seat and 2 bolts in the back of the seat that hold it down to the floorboard. Once it is loose you can rock the seat backwards to access and unplug the electrical connectors.

Posted on Aug 11, 2008

GasparMacari
  • 166 Answers

SOURCE: how do i fix the thermometer in my vauxhall corsa

that is not your thermostat, that has to be the temp sensor on your cylinder head, should be next to the intake manifold on the head. it has 1 cable. that sensor´s only job is to show you the temp of the engine on the temp dial in your instrument display
the thermostat is connected to a water hose that goes to your radiator, its also on the cyinder head, but thermostats are only mechanical doors regulated by temperature that allow hot water from the engine go cool down on the radiator.
let me know

Posted on Jun 19, 2009

GasparMacari
  • 166 Answers

SOURCE: corsa head torque settings?

for 4ee1
cylinder head
stage 1: 40Nm
stage 2: 60° - 75°
stage 3: 60 - 75°
let me know if u need any more of those
take care

Posted on Aug 21, 2009

GasparMacari
  • 166 Answers

SOURCE: Vauxhall Corsa brake pads

lift car
take the wheel off
the caliper off, the screw is right behind the side ur gonna have in front of you,
after u take that screw off the pads will be free to take off,
replace,
check the piston of the caliper and check for the conditions of all the rubber that is on the caliper, replace if needed
screw it back and put the wheel back to its place
hope this helps

Posted on Aug 21, 2009

  • 1 Answer

SOURCE: Instructions to remove Driver Seat and replace the drive cables for the seat movement.

Is this easily done? Seems simple enough but worried I won't be able to get the seat back in place...

Posted on Jan 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 mercury montaineer. The drivers seat which is a power seat, will not go back all the way. It makes it half way and then nothing. Please help!!!


Most Ford products are designed so the seat belt latch by the center console moves with the seat. The bottom of the latch rides on the seat rail, and with time sometimes it builds up a little play on the rail. As the seat moves forward or back, the seat belt guide often tilts forward or back, just a bit, on the rail, and gets stuck. So you can move forward or back just a bit, but then it jams and you can hear the motor, but can go no further.

The long term fix is to remove the seat, disassemble the seat belt guide and rail, and usually replace some parts.

But the short term solution is often to simply hold on to the seat belt latch and rock it forward and away from the seat as you try to go forward or back. Or, sometimes it works best to rock it backwards and away from the seat as you try to move forward or back. It all depends on which way it is binding.

There's no guarantee that it won't jam again if you move it all the way back or forward, but once you find the right position to hold the seat latch in while moving the seat, you should be able to re-adjust it where you need it to be.

Aug 28, 2013 | Cars & Trucks

2 Answers

1999 GMC yukon looking for front driver seat


When mine broke I want to scrap yard and removed bymyself for $50.

Apr 03, 2013 | GMC Yukon Cars & Trucks

1 Answer

Passenger seat will not slide forward


there will be bars underneath the seat that are supposed to go across to unlock both sides so that the seat can move forward and back, try having someone pull the lever and see if you can see from behind the bar that moves and figure out what it corresponds to on the opposite side. you should be able to move it by hand, release the lock and set the seat where you want it, as for a permanent fix, most seats are not difficult to remove, typically four bolts, although some take specialty tools like large torx bits, and i would imagine the bar is replaceable

Jan 27, 2013 | Cars & Trucks

1 Answer

Pt cruiser seat adjuster problems - my drivers seat power seat adjuster doesn't work (as of yesterday ) and it is stuck in the fully forward position - it there anything i can do? it would only move up...


You might have a problem with the wiring under the seat. The best thing to do is to reach under the seat and move some of the wires away from the track that the seat moves along. Most likely there is a short to ground because the wires are rubbing against the seat track as it is moved back and forth. You need to grab a flashlight and look under the seat for wires touching the seat tracks. When you find them, you can most likely use some electrical tape to wrap the exposed wires and keep those wires from touching each other and that area from touching the seat track. Make sure you route the wires away from the seat track tight enough to the seat's underside, but loose enough to allow the wires to move with the seat as it travels the full length of its track. The fuse for the seat has probably blown so you would need to replace the power seat fuse AFTER you wrap and reroute the wires to prevent blowing the new fuse.

Hope this helps!

Sep 06, 2010 | Chrysler PT Cruiser Cars & Trucks

1 Answer

My driver side seat will not move forward or backward


Can you hear the motor turn when trying to go back and forth? If not, motor may be faulty or bad relay in the wiring to that motor.
If you hear motor and seat doesn't move, then the motor may have fallen off track

Aug 27, 2009 | 2003 Mercedes-Benz C-Class

2 Answers

My passenger seat won't lock into position. It slides back and forth as I drive and the bar that you pull on to move it back and forth is stuck in the up position.


There is a spring that pull's the handle back to lock position that might be broke or the locking mechanism might be gummed up.the spring can't be bought seperatly so check a hardware store or replace the seat track assembly.

Aug 11, 2009 | 2000 Chevrolet S-10

1 Answer

Driver seat not moving back and forth


under the seat is a thin wire that goes from one side to the other it has most likely broke you need to find the secondary lock it was connected to and release it to move the seat but you must also release the main lock so i suggest replacing the wire . THIS IS FOR MANUEL SEATS 
now as for power seats you will have to locate the power lead wire and make sure it is not broke if so you can replace the connecter with an aftermarket one and it may work again

May 15, 2009 | 2004 Honda Accord

1 Answer

Where's the crank for a 2004 isuzu axiom


have you checked the fuses / you can check for any burnt fuses concerning the seats. The "crank" I don't know what it is unless it is concerning the crankshaft/or crankshaft sensor.that has nothing to do with the seats though. some seat adjusters are electrical some are not. the ones that are not electrical, have either a bar under the seat or on the side of the seat to move the seat back and forth or adjust the back of the seat.

Nov 18, 2008 | 2002 Isuzu Axiom

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...