Question about 2007 Chevrolet Equinox LS New Cars
Please any solution will be appreciated.
Sometimes it will go in to limp mode if your check engine light is on you need to reset computer.to do that you need a scan gage if not you can on hook neqative post from battery for thirty seconds.than hook backup and start the rig.hopefully this sloves the promblem
Posted on Nov 22, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 04 chevy tahoe
the check engine light you are getting sounds like and electrical problem, have the battery and the alternator tested, and have autozone or the like pull the codes off for you and see if you can figure out what they are....
Posted on Jul 25, 2008
Check the drive belt,and the alternator,most likely if the belt is still on,and it is running on the pulleys ok,then the alternator maybe out,have it checked,with out the alternator working the engine will not perform.
Posted on Jan 09, 2010
SOURCE: reduced engine power on
The traction control uses the speed sensor in the transmission and the wheel speed sensors to determine wheel spin. If a wheel spins braking is applied to it so that the power can be transferred to the other wheels. At some point the ECU detected a gross disagreement between the sensors and so as a precaution has entered into a limp home mode. On some systems if the fault is in error it can be cleared by putting the car into drive and moving forward a meter, putting in reverse and going a back a meter and doing this three times. If one or other of the sensors are faulty this process will not allow the error to be cleared. You need to check or have checked the error codes and the speed sensors.
Posted on May 28, 2010
SOURCE: my 2008 chevy uplander engine
You will need to get the codes checked.This will help in finding out what is causing the light to come on.Once you get the code or codes we can find out what could be causing the problem.Let me know when you get the codes and I`ll be glad to help you out.Good luck.
Posted on Mar 01, 2011
well, it something with a sensor, ive worked on a few of these with the same problem. when ever the engine light is turned on or if the computer sees a problem it shuts down the traction control and the loss of power light comes on, the ones i worked on one had a bad throtlebody and the other was a bad air fuel sensor, what you need to do first is to have the computer scanned to get the codes the computer has stored, these codes will tell you what has failed, there are many auto part stores that will scan it and give you a print out with the codes and if you get me the codes i can help you further. good day
Posted on Apr 11, 2011
Tips for a great answer:
Aug 02, 2017 | Nissan Cars & Trucks
Mar 27, 2015 | 2003 Mazda 6
May 12, 2017 | 2004 GMC Sierra Denali
Apr 04, 2014 | 2003 Mazda 323
Dec 11, 2013 | 2009 BMW X5 3.0d
Feb 23, 2013 | 2002 Honda Civic
Aug 09, 2011 | 1999 Isuzu Trooper
Feb 12, 2010 | 2003 GMC Yukon Denali
Jul 18, 2009 | 2004 Jeep Liberty
Jan 15, 2009 | 2005 Hyundai Accent
142 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: