Question about GMC Yukon

1 Answer

Viper remote reset

Ihave a 2005 yukon xl with a viper lock sysytem and the other day the fob wouldn't open the doors and I had to open the door with a blood pressure cuff and wire. my car started when I got in and I have left my car unlocked so this wouldn't happen again. I recently had service done at a service stattion and they said they checked my battery and it may have caused a surge in the system and it may need to be reset.I can open the doors today with the fob but the horn doesn't sound when you lock or unlock the doors. could someone help me.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 22,219 Answers

Yes get the wire cutters out and remove the alarm system ,they cause nothing but hassle normally when you can do without it ,like wife having baby or in the middle of nowhere .These sort of boy racer gizmos are a complete waste of money and the amount of hassle they cause ,if wanted to steal your car a viper or any other alarm system wouldnt stop me ,Breakdown or tow truck to you and its gone ,trust me on this best deterent is a padlock and chain around steering wheel and seat fixing or a exhaust clamp through floor in a inverted U .highly visable deterent and a combination lock even better as no key if they break into house and steal the vehicles keys or lift them out on a fishing rod through a post box or open window even a grilled air vent ,i have seen it all in my time but?? something new can always come up .These auto remopte start alarm things are nothing but a waste of money ,whats wrong with keeping the car in the garage instead of a garage full of junk or a kids playroom

Posted on Nov 22, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
raygin
  • 322 Answers

SOURCE: Jag S-Type -intermitent fault where the remote fob does not work

This does not sound like a fob fault - but a locking control module fault , either in the hardware or software of the unit. Get it checked at a Jaguar dealers. When unlocking using the key - as soon as the door is opened you should hear a chime sounding inside the car - this is a timer counting down to sounding the alarm. If you put your key in the ignition as soon as you open the door the alarm should not go off and the chime should stop. If it does not this again points to a fault in the locking controller.
hope this helps - good luck.

Posted on Jul 08, 2009

rockitman187
  • 2559 Answers

SOURCE: My key fob remote will not unlock car doors but will start car

Here you go.If you can't read it I can email it to you.
c2293a3.jpg

Posted on Aug 04, 2009

SOURCE: 2005 Ford Escape - Door Open Indication Light & Horn Alarm Sounds

This is probably caused by:

a loose door switch, or

a loose connection to a door switch, or

a defective (dirty / corroded) door switch.

There is a false signal being sent that a door is open / ajar.

Posted on Mar 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 ford explorer sport trac. Door lock buttons do not work. Fob does not work. must lock with key. Doors are very hard to open.


You can reset your fob. Here's a link on how to reset fob,if you have 2,then do at the same time,when 1st fob is done ,push any button on second one asap. http://www.keyfobprogram.com/2005-ford-explorer-remote-programming

Aug 30, 2017 | Ford Cars & Trucks

1 Answer

Reset mercedes key


MANY are connected to the drivers door lock, using the key , turn it to the left pause turn it to the right pause... do this twice...

Jul 22, 2014 | 2005 Mercedes-Benz ML 350

1 Answer

Do you have a part # for the #1 remote keyless entry key fob 2003 Yukon xl. Bought vehicle used and got driver #2 fob but would like to have the #1 also cause 2 different drivers and would like settings...


Here is a secret, I go to the Salvage Yard and buy them for $10.00 and reprogram them for the match the car's. When you go to the Salvage Yard, if there organized will have sets of fob keys in a box. Go though it and look for the same FCC numbers on your working Fob key and here is the instructions for you to do the relearn for your 2003 Yukon XL.
1. Close all vehicle doors.

2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold
down until instructed to release in step 9.

4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the
engine).

6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock
the doors automatically.

10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until
the door locks and unlocks.
This step may take up to 30 seconds.

11. Repeat step 10 NOW for each additional transmitter (including any existing
transmitters).

12. Turn the ignition switch to the ON position in order to exit the transmitter programming
mode.



Good luck and thank you for using Fixya, just call around the different Salvage yards if not you can try E-bay.

Mar 08, 2010 | 2003 GMC Yukon XL

1 Answer

Rear doors and tailgate will not lock with remote or with buttons , unlocks ok 2005 GMC YUKON


Harris, did you find a solution to your problem? I am having the same issue on my 04 denali. Rear doors and tailgate wont lock but the unlock fine. Front door function normally? let me know.

Jul 09, 2009 | 2005 GMC Yukon Xl Denali

2 Answers

2005 gmc yukon back passenger doors will not unlock with key remote and rear hatch wont unlock or open


Either the relay for the locks is bad or the fuse. When you push the power lock on the inside if the doors do not unlock then I would check the fuses, both inside and under the hood. If they do work then the relay/s may be bad. You are pushing your key button twice correct?

Jun 21, 2009 | 2005 GMC Yukon Xl Denali

1 Answer

How to program a keyless entry fob for 2005 gmc envoy - i am replacing the battery in my key fob every 5 days. I have to be right next to the car for it to work. Any idea what would cause this. I ordered a...


Seating in the drivers seat , make sure all doors are closed.Insert key into ignition, don't turn on yet.
Wait for the dome light to go out, then press and hold the door unlock button , make sure it is UNLOCK, while turning the key ON OFF ON OFF Twice , do not engage the started, just on to the point of being on. Release the unlock button,and your doors should lock, then unlock indicating programming mode.At this point hold down both the lock and unlock button on the key fob. After 30 seconds your locks should lock and unlock, indicating the fob is programmed. This must be repeated for all remotes, whether or not it be new or old. After all remotes are programmed, turn the key off and on again to exit programming mode.

May 18, 2009 | 2005 GMC Envoy

2 Answers

Yukon xl rear door won't unlock and there is no manual lock.


I fixed mine by using fine steel wool to clean the brass contacts located at the right upper door frame on the right door as viewed from the rear of the vechicle.

Mar 12, 2009 | 2003 GMC Yukon XL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...