Question about Cars & Trucks

1 Answer

My 2010 dodge caliber sxt 2.0 is hiding my camshaft position sensor. Any help, pictures and advice will be very much appreciated.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 46 Answers

Back of engine (opposite of belts), right below valve cover. That's where it is on the 2.0L from early 2000s

Posted on Nov 22, 2013

  • 1 more comment 
  • Kevin Lenox Nov 23, 2013

    Thank you, I'm going to try it out now. my dodge also had code P0571-brake switch 1 performance. What can I do if anything for that code?

  • Cody
    Cody Nov 24, 2013

    What I recommend with all codes, is this: If your car is running and working well, clear the code and keep driving. This will help you decipher which codes are accurate, the car may store an old code from a problem that no longer exists, or has been repaired. By clearing all of the codes out, you ensure that the next time you read the codes, they are all recent.

  • Cody
    Cody Nov 24, 2013

    If your brake lights are actually malfunctioning, and you have a brake light switch code, buy a switch. It's something that you can replace in a few minutes, some even with no tools. It'll be located up under the dash, either on the upper end of the pedal, or mounted on a bracket near the upper end of the brake pedal.

×

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

wilsodfarm
  • 986 Answers

SOURCE: CODE PO 340 SENSOR CIRCUIT CAMSHAFT MALFUNCTION

This indicates that a problem was detected in the camshaft position sensor circuit. Since it says circuit, that means the problem could lie in any part of the circuit - the sensor itself, the wiring, or the PCM. Don't just replace the CPS (camshaft position sensor) and think that will definitely fix it.I hope this helps you

Posted on Oct 06, 2009

  • 373 Answers

SOURCE: where is the camshaft sensor on a 2004 dodge neon

disconnect the negative battery cable. the cmp sensor is located on the left end of the cylinder head. move thebrake booster hose and electrical wires out of the way to access the cmp sensor. disconnect the sensor plug by pushing the locking tab back toward the firewall. remove the 4 bolts from sensor and lift out sensor. remove the trox bolt which holds the target magnet to camshaft. when installing target magnet be sure to line up holes to dowels on end of camshaft. torque torx bolt to 30 in-lbs. be sure to install new o-ring on sensor and torque bolts to 80 in-lbs. (hallclifford)

Posted on Apr 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Diagram of where a camshaft sensor is on a dodge stratus 2.4L 4 cylinder


2003 model
not confirmed
crank angle sensor might be near the stater motor on the block


26233366-qzmmc3ihqjw1j4mumdlnccct-4-0.gif

26233366-qzmmc3ihqjw1j4mumdlnccct-4-2.gif

Jul 07, 2016 | Dodge Cars & Trucks

1 Answer

I have a problemis with my dodge caliber 2009 the transmissoin dos not changing,


how to check dodge caliber cvt transmission ... - CarGurus

www.cargurus.com > Questions > Dodge > Caliber
CarGurusMar 20, 2010 - I bough used Dodge caliber SXT 2008 & i don't know how to check the CVT ... I have a 2009 300c and 2010 caliber and both tranmission are ...

Jul 20, 2015 | 2009 Dodge Caliber

1 Answer

Where is the crankshaft position sensor located on a 2010 dodge avenger 2.4L


most are located on the ft lower part of engine by crankshaft with 2 wires going to it

Oct 17, 2014 | 2010 Dodge Avenger

2 Answers

CODE PO 340 SENSOR CIRCUIT CAMSHAFT MALFUNCTION


This indicates that a problem was detected in the camshaft position sensor circuit. Since it says circuit, that means the problem could lie in any part of the circuit - the sensor itself, the wiring, or the PCM. Don't just replace the CPS (camshaft position sensor) and think that will definitely fix it.I hope this helps you

Oct 06, 2009 | 2004 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...