Question about 1997 Ford Expedition

Open Question

Ford falcon ute 1997 needs new leads on distributor cap

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 16 Answers

SOURCE: i cant remember where my leeds go on my distributor cap

how many cylinders? for 4 the firing order is 1342 for example--if you have 6 or 8 lookit up on the net and you will find the firing order and then just count round the distibutor and hook up accordingly--modern cars don't have this issue--no distributor.

Posted on Jul 11, 2009

8ushy
  • 109 Answers

SOURCE: leads sequence from distributor to spark plugs

Here is the firing order for the 3.3 L6 and the 2.3 L4 1983 XE Ford Fairmont
8ushy.gif8ushy_0.gif
If this dosn't help plz goto this site:
http://autorepair.about.com/library/firing_orders/bl-ford-firing-83.htm

Posted on Dec 14, 2010

  • 115 Answers

SOURCE: DISTRIBUTOR LEADS CONECTED WRONG 2

Web Site you can use click me
1- green
2- Red
3- Wht

Thats from left to right,

If its a 6 its the same on both coils
6 Cylinders

vp4cyl6wiring.jpg

4 Cylinders
vp4cyl4wiring.jpg

Posted on Mar 05, 2011

  • 867 Answers

SOURCE: what is the order for the high tension leads on a ford falcon au ute

1-5-3-6-2-4

Posted on Mar 07, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove and reinstall the distributor on ford falcon 4.0 1999 model


First make absolutely sure #1 cylinder is at top dead and the timing mark on the crank pulley is lined up. Pop off the distributor cap and check to see if the rotor is pointing to the #1 spark plug wire. Loosen the bolt that holds the clamp at the base of the distributor. Move it aside or remove it them pull up on the distributor and move it out.

Aug 30, 2016 | 1999 Ford Falcon

1 Answer

How do I install leads into ford falcon


The leads are still mixed up so you need to ascertain which is number one, two three cylinder and make sure the correct lead goed to the correct spark plug and distributor contact. If the engine runs but runs rough you likely only have two wires mixed up. Pull on wire at a time off. If the engine stalls or runs worse put it back on. Do this until you find two wires that do not affect the engine running when you pull them off and it will be these two that are interchanged. It will likely be easiest to do this at the distributor end. If you do not wan to get a shock do it with good rubber gloves on or pull a wire off with the engine off and see if it starts and if it does you likley have pulled of a wire that should be connected somewhere else. GOOD LUCK.

Nov 28, 2014 | 1997 Ford Falcon

1 Answer

I washed engine on my 1997 XH ute now it wont start


You probably got water into the distributor and spark plug leads/spark plug caps.
Dry them out and this should solve your problem,

Jan 22, 2012 | Cars & Trucks

1 Answer

DISTRIBUTOR LEADS CONECTED WRONG 2 IN WRONGPLEASE DO YOU HAVE DIAGRAMS 1999 FORD FALCON UTE PLEASE IGNORE MODEL DO NOT HAVE OUR LISTED


Web Site you can use click me
1- green
2- Red
3- Wht

Thats from left to right,

If its a 6 its the same on both coils
6 Cylinders

vp4cyl6wiring.jpg

4 Cylinders
vp4cyl4wiring.jpg

Mar 05, 2011 | Ford F Cars & Trucks

1 Answer

Falcon ute lights go dim at night and battery goes flat.


either your alternator is faulty or your battery is not holding charge
i would check the alternator and the battery and replace either or both

Jul 08, 2010 | Ford Futura Cars & Trucks

1 Answer

Need a diagram to change rear wheel bearings ford falcon ba ute


if you are looking for a manual for this car, try this link... http://cgi.ebay.ph/Ford-Falcon-Ute-BA-series-Repair-Manual-2002-2005-on-CD_W0QQitemZ170423275380QQcmdZViewItemQQptZAU_Clothing_Merchandise_Media?hash=item27ae04cf74 For twenty bucks you can do it all yourself

Feb 05, 2010 | 1999 Ford Taurus

1 Answer

Xf falcon ute dies driving up hill


have had a few of these in with carb faults but were 2 barrel type.basic checks first,is pcv valve hose under carb not split(runs to valve cover or oil cap on this model?).try driving without airfilter element for test,have had one in that looked clean but had a fine mist of oil on it that blocked and caused air starve and stall on power.Did both problems start at same time? or maybe you are chasing 2 probs.being a ute.I have had probs with rusting petrol tanks and blocked fuel filters

Jul 24, 2009 | 2000 Ford Focus

1 Answer

I cant remember where my leeds go on my distributor cap


how many cylinders? for 4 the firing order is 1342 for example--if you have 6 or 8 lookit up on the net and you will find the firing order and then just count round the distibutor and hook up accordingly--modern cars don't have this issue--no distributor.

Jul 11, 2009 | 1983 Ford Fairmont

7 Answers

Firing order for a 1996 EF ford falcon


EF & EL are 1,5,3,6,2,4
EF has a coil pack under the inlet manifold the EL has a distributor
EF uses a waste spark system so 2 plugs are fired at the same time eg 1 & 6 - 2 & 5 - 3 & 4

May 18, 2008 | 1983 Ford Fairmont

Not finding what you are looking for?
1997 Ford Expedition Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...