Question about 2003 Ford Mondeo
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Very easy, 2 or 3 minutes.
Remove radiator grille. 2 plastic fittings on top, quarter turn and lift out grille.
Remove complete headlight. Simply lift out 2 L shape retaining pins. Disconnect lead. Ease out complete headlamp unit.
Remove back of headlamp unit to access bulbs. Disconnect lead from bulb while bulb still held by clip. Then release clip to remove bulb.
Reverse process to fit.
Posted on Feb 22, 2009
Just observe how you take the old ones off. Pads can only snap in one way. It may take some effort but clean the caliper of rust you shouldn't have any problem. Remember to crack open your brake fluid reservoir before compressing the caliper!
Posted on Mar 30, 2009
have you tested the brake light switch? it is located at the top of the arm the brake pedal is attached to, it is very common for the wires to that switch to break inside the plastic insulation, the switch testing goes like this, there should be 12 volts present at both sides of the switch with the brake pedal depressed and one side without the pedal depressed.
Posted on Jul 01, 2009
Tips for a great answer:
Sep 18, 2014 | Ford Mondeo Cars & Trucks
Jul 14, 2014 | 2006 Ford Mondeo 1.8
Nov 06, 2012 | 2003 Ford Mondeo
May 27, 2010 | 1978 Ford Granada
Jan 15, 2010 | 2002 Ford SVT Focus
Jun 30, 2009 | 1999 Ford Taurus
Jun 18, 2009 | 2003 Ford Focus
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: