Question about 1999 GMC Sierra 3500

Open Question

My truck wont crank no diesel in the fuel injectors is a 6.5 gmc sierra 1999

A did to change the fuel injection pump but I have the same problem so I don't what to do and also did to change de injection module and nothing

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 94 GMC truck diesel starts,runs and then dies and will not start

I have the same problem and have trouble codes 35 and 36. I found out that there is a computer module that needs replaced as it sits low in a valley and gets hot and seperates. I am reseaching about the a/m fix that installs the new module away from heat.

Posted on Mar 12, 2009

  • 1 Answer

SOURCE: 2006 gmc sierra 1500 stalled and will not start.

i have a 06 sierra that done the same thing and it was the distributer gear stripped

Posted on Dec 08, 2009

  • 14 Answers

SOURCE: 6.2 diesel will not bleed diesel

Make sure all lines are light when turning engine over.While turning engine over loosen the a line closes to pump or the fuel filter.You should get some fuel.Then continue on all lines working farther away.

Posted on May 02, 2010

iambanshee74
  • 3489 Answers

SOURCE: I have a 1999 gmc

This sounds strongly like a PMD issue which is on the side of the fuel injection pump. Common issue and easily remedied. There are kits in which put the PMD in a different location as to avoid heat saturation. Let me know if you need to find one.

Posted on Oct 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No fuel pressure at fuel rail but still runs 2000 gmc sierra 4.8


well engine cant run if fuel rail not getting fuel rail because fuel injectors wont have fuel to inject.

Aug 14, 2013 | GMC Cars & Trucks

1 Answer

Ran out of diesel now vehicle won't start


This is not unusual on a diesel. What happens is there is air in the system. If this vehicle has an electric fuel pump loosen line where fuel enters injection pump then turn ignition key to the on position and watch for fuel to appear and then quickly tighten line before turning off key. Then try to start. If does not have electric fuel pump will need a second person. One will loosen line and watch while other cranks vehicle until you get fuel and tighten line before the other person releases ignition switch unless vehicle starts first. If that doesn't do the job do this where line hooks onto each injector. Probably will not have to do this to all injectors but could run rough until all the air gets out of everything. I have farmed with diesel tractor for 25 years and dad I drove the gm vehicles with the 5.7. You normally don't start a diesel without bleeding the air out of the lines although some will self bleed most won't. Hope this does the trick.

Jun 21, 2012 | 2004 GMC Sierra 2500

1 Answer

1999 gmc sierra 2500 6 liter ran out of gas now won't start


If you are at or near the 100,000 mile mark then your fuel pump may have failed. If you remove the fuel filler cap and listen carefully at the filler neck while someone turns the ignition key to "run" [don't actually crank the engine] you should be able to hear the fuel pump buzz for about a second and a half as the key is turned On. If you don't hear the pump buzz then odds are your pump is dead. Your pump may have actually failed making it appear as though you ran out of fuel. Not to uncommon. Hope this helps and good luck!

Nov 01, 2011 | 1999 GMC Sierra

1 Answer

I am doing repairs on a 100 series toyota diesel l/cruiser. my problem is, that i've changed a seized engine (2004 model) with a (1995 model), and both engines are the 100 series 1hz diesel range. But the...


better chec the wiring or connections 1st--pull the plug from the pump and inspect for flaws and corrosion then plug back in--pump itself can be tested--the fuel injection pump in engine area may have issues

Feb 28, 2011 | GMC Suburban Cars & Trucks

1 Answer

I have a 1999 gmc 3500 6.5litre turbo diesel tow truck.It will not crank.I replaced the cam sensor,injectors,fuel filter,fuel pump and still wont start.


This sounds strongly like a PMD issue which is on the side of the fuel injection pump. Common issue and easily remedied. There are kits in which put the PMD in a different location as to avoid heat saturation. Let me know if you need to find one.

Oct 26, 2010 | GMC K3500 Cars & Trucks

1 Answer

6.2 diesel will not bleed diesel


Make sure all lines are light when turning engine over.While turning engine over loosen the a line closes to pump or the fuel filter.You should get some fuel.Then continue on all lines working farther away.

May 02, 2010 | 1990 GMC C1500

1 Answer

Truck stalls.. then wont crank but sometimes it will crank and run fine....this is a diesel 6.5L gmc3500


Sounds like you have the common problem with GM 6.5 diesel. The PMD ( pump mounted driver, the black box on side of injection pump is failing when it gets hot, cools down just a bit and restarts. Eventually it will leave you stranded.I would suggest replacing entire pum for warrant purposes, Sorry for bad news but I have seen many of these go bad. GM actually extended the warranty on these pumps to 10 years or 100,000 miles. This was not commonly known, even by dealers. It will be an expensive fix. Good luck. Please rate my answer

Mar 02, 2010 | 1999 GMC Sierra 3500

2 Answers

99 ram diesel wont start


Did you check to see if there is power to the glow plugs if not then that may be the problem and if there is power when you cycle the key not to start but for the plugs to warm up you may have a bad glow plugs.

Apr 22, 2009 | 1999 Dodge Ram 2500 4WD

2 Answers

Wate in Diesel Fuel


Yes, Diesel engines can tolerate a little water but alot of water (over a period of time) can damage cylinder walls, pistons, injectors, and the injection pump.

Mar 03, 2009 | 1993 GMC Sierra C3500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...