Question about Cars & Trucks

1 Answer

I have a 2005 Dodge Magnum rt awd The car drives and runs fine but sometimes it will honk out of nowhere and the buttons on the steering wheel wont work I fiddle with the light switch and sometimes it seems like then I can work the steering wheel buttons I'm taking it to the dealership numerous times paid $120 each for computer reset they say it doesn't do it to them they don't know

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

2 suggestions:
1 check the clock spring under the steering wheel airbag
2 continue to fiddle with the light switch & if it works, you may need to replace that switch

Posted on Nov 22, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 33 Answers

SOURCE: 1994 chevy s10 blazer 4x4 push button type

small sylinoid on the top of the transfer case needs replaced. easy to do. it has three vacumelines going to it just trun out and replace like a bolt.

Posted on Dec 13, 2008

  • 70 Answers

SOURCE: 2005 Dodge Magnum, after replacing battery,cd player won't work

My story Dealing with Dodge

I had a 1994 Dodge Ram. The Red Dodge Ram I had it malfunctioned and my brake became the throttle. I had to put the truck in reverse then park. to stop, after it was out of control at 80 mph a hill slowed us down. Are you sure its not electrical and the curse control is not giving you trouble? Mine had multifunction switch was not working and the headlight switch burned up. I also found out that Audi had problem with the brake becoming the throttle in the 1980s Daimler Chrysler and Audi were German made. I don't think there is an easy answer. I hope you stay safe. Another man is having strange trouble also. I'm sure there are many more people with trouble with the vehicles. I wish Dodge would step up to the truth. and recall their nightmares. I saw many of their 1996 Dodge trucks at their dealers shop with all the electrical pulled out.

Posted on Mar 22, 2009

  • 99 Answers

SOURCE: 2005 magnum esp/bas and engine light on

you need to see what the eng lite for if there is a trans codes usually the pcm wont let the speed go over 40 stays in safe mode untill you fix the problem or change the sensor,for the esp you need to chage the esp sensor and recalibrate by the dealer

Posted on Jul 21, 2009

  • 2 Answers

SOURCE: my renault laguna 1999 rt remote key fob wont work?

IF YOU TYPE 1999 RENAULT LAGUNA REPROGRAMME KEY INTO A GOOGLE SEARCH, YOU WILL BE ABLE TO PRINTOFF INSTRUCTIONS TO REPROGRAMME THE KEY TO THE KEY READER.THE IGNITION NEEDS TO BE OFF TO DO THIS

Posted on Dec 02, 2009

dennymulford
  • 1055 Answers

SOURCE: My 1999 Chevy Blazer has 4-wheel drive problems.

sounds like you have either a lose conection at the 4 wheel drive switch or a lose ground!!!!!

Posted on Jan 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The ABS and the ESP/BAS light is staying on. Seems to stop and drive fine. Doesn't feel out of alignment.


have brakes checked as when at about 20-25% remaining will cause light to stay on but brakes feel fine and no brake noise will appear

Sep 15, 2013 | 2005 Dodge Magnum RT

1 Answer

2005 dodge magnum rt. a/c gauges not working an i cant tell how much ac im putting in because the high pressure side is not moving from 50psi. but if i turn car off it goes up


If both sides are reading the same, the compressor is not working, or you have the gauges hooked up to the same side somehow.
The system should read what the outside air temp is until the compressor starts running.

Aug 28, 2013 | 2005 Dodge Magnum RT

1 Answer

Broken axle


how do you know this ? this is a front wheel drive, correct ? where is axle supposely bent , rear ? you must clarify your problem in detail !!!!!!!!

Mar 04, 2013 | 2005 Dodge Magnum RT

1 Answer

How to change the spark plugs in my 2005 dodge magnum rt hemi 5.7 ???


There are only 8 spark plugs there are also 8 coil packs over the spark plugs the you need to remove to get the spark plugs out

Jan 12, 2013 | 2005 Dodge Magnum RT

1 Answer

2005 magnum RT horn starts honking on its own and car won't start


alarm its self goosed may have to take it to an auto electrition to disconect the old alarm

Aug 24, 2012 | 2005 Dodge Magnum

2 Answers

Where is the starter on my 2005 dodge magnum


There were 3 different engine options for this car. See pictures below. I also recommend you read my post at http://www.fixya.com/cars/r5973094-starter_replace . If you have any trouble or would like step by step instructions, please get back to me.

For the 2.7 and 3.5 engines:
jturcotte_369.gif

For the 5.7 with rear wheel drive:
jturcotte_370.gif


For the 5.7 linter engine with all wheel drive:
jturcotte_371.gif

Dec 04, 2010 | 2005 Dodge Magnum

1 Answer

2007 Dodge Magnum, RT/AWD - Front Driver side wheel area noise, like snow/ice was caught up under, checked notheing. One month later the noise came back but with a vengence. Now makes the noise at all...


Check the Brakes first. Are the pads worn down to metal. Is the Caliper Stuck (open)?
Raise and Support the Front and Rear (because of AWD) of the vehicle.
Remove the left front tire. Make sure the Parking Brake is engaged. Place the lug nuts back on the lug studs. Place the Vehicle in Neutral. Turn the wheel (without the tire on) and listen for where the noise is coming from. A bad bearing will feel rough (not smooth) and sound 'crackly' when trying to turn the one wheel. Make sure it is not from the CVJ.
If not smooth: Remove and Replace the wheel bearing. And yes you can do it yourself saving you about $150-$200 dollars. It is a bolt-on (4 bolts) bearing. Bolt Heads should be on the back side of the steering knuckle.
Remove the Brake Caliper, Caliper Brace, and Rotor.
Remove the 4-bolts (turn the wheels left and right to better access these bolt heads) and slip the bearing off the Axle. You may have to hit the bearing to loosen it.

Jan 05, 2010 | 2007 Dodge Magnum SRT8 Wagon

1 Answer

1992 Dodge Ram 50: Horn honks all by itself.


Check the horn actuating contact at the centre of the steering wheel. It may be damaged or mis-aligned.
Also check the carbon contact that runs on the slip ring under the steering wheel (associated with steering wheel horn actuate switch) It may be damaged or mis-aligned.

If none of the above are faulty, you should look for a possible intermittent short to ground on the horn actuation control wiring.

Jun 12, 2009 | 1992 Dodge Power Ram 50

4 Answers

Strus or shocks in the front end of the magnum?


According to the replacement parts guide, they are struts and I checked for all wheel drive and 2 wheel drive and all are showing struts.

Apr 04, 2009 | 2005 Dodge Magnum

1 Answer

Dodge Magnum 2005 SXT AWD


You may have a poor ground connection to the cluster, most likely the cluster connector is at fault, pull it out and reconnect it, it is at the back of the instrument cluster, also the Body Control Module can cause this. Have a quick test run to check for any trouble codes in the BCM

Sep 17, 2008 | 2005 Dodge Magnum

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...