Question about 1995 Dodge Caravan

Open Question

Fuel pressure regulator

Could anything cause a fuel pressure regulator code on a 97 dodge intrepid?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75744 Answers

SOURCE: no gas going through fuel pressure regulator on 1995 dodge carava

I doubt the regulator is bad, the fuel pressure regulator is after the injectors in the return stream to the tank, more likely it is the fuel pump.

Posted on Mar 10, 2009

csmock132
  • 4669 Answers

SOURCE: fuel pressure regulator

Have you checked the fuel pressure? If it is high and fuel is not returning, the regulator is bad. If it is low and fuel is not returning, the pump is bad.

Posted on Mar 11, 2009

c17hydro
  • 2984 Answers

SOURCE: My 97 dodge intrepid 3.5L is running hot.

Check the connection betwteen the temp sensor, located on the block and check your fuses/relays. It may help if you pull and reseat each fuse. This is free and saves a lot of headache swapping out parts.

Posted on Mar 13, 2009

motor1258
  • 6674 Answers

SOURCE: I cant find the flasher unit location for my 97 dodge intrepid.

Check down under dash by left side of brake pedal area.

Posted on Apr 30, 2009

  • 314 Answers

SOURCE: how to fix the gauges on a 1997 dodge intrepid?

check your instrument panel fuse in the fuse box, the instrument cluster is operated by the same circuit

Posted on Jun 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 dodge intrepid stalls out while driving and sitting in red light why


Dodge 2000 Intrepid stalling on Traffic Light - This is caused by either wrong amount of Fuel or Air mixing in Idle condition. Please check fuel pressure at Idle which should be at least 38 psi and should go up when you press the accelerator. If fuel pressure is okay then Clean out the Throttle body carefully. This should solve the problem if no Check engine light is on. If Check engine light is on then please confirm and give me the codes present in On Board Diagnostic port (Auto Zone or Advance Auto will read the codes free for you) and we will go from there.

Jan 05, 2015 | 2000 Dodge Intrepid

1 Answer

Repacing fuel filter on 1996 intrepid


1) Relieve the fuel system pressure by first removing the fuel pump relay from the Power Distribution Center. Then, start the engine and let it to run until it stalls. Try starting it again and allow it to run until it stalls. Continue restarting the engine until the car will no longer start. Turn off the ignition.
2) Disconnect one electrical connector from an injector. Use an alligator clip to connect an end of a jumper wire to either injector terminal. Connect the other end of the jumper wire to the positive side of the battery. Then, connect an end of a second jumper wire to the other injector terminal. Very briefly touch the other end of the jumper wire to a ground.
3) Locate the fuel filter, which is part of the fuel pressure regulator mounted on the fuel pump module. Disconnect the negative battery cable, then lower the fuel tank. Disconnect the fuel lines from the filter.
4) Remove the fuel line from the pressure regulator. Remove the filter/regulator by pushing in on the locking tab on the filter as you turn the regulator to unlock it. Then, pull it straight up.
5) Push the new fuel filter into the fuel pump module. Turn to lock it in place. Connect the fuel lines, and then you can reinstall the fuel tank. Check for leaks when you start the engine on your Dodge Intrepid.

Parts Of BMW.





May 30, 2012 | 1999 Dodge Intrepid

1 Answer

Where is the fuel filter on a 2003 dodge intrepid


Removal & Installation

Print
The fuel filter mounts to the frame rail in front of the fuel tank. The inlet and outlet ends of the filter are marked for installation purposes. Install the fuel filter making certain that it is properly orientated.

NOTE The fuel filter is part of the fuel pressure regulator mounted on the fuel pump module.

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Properly relieve the fuel system pressure.
  3. Lower the fuel tank.
  4. Remove or disconnect the following:

    Negative battery cable Purge and vent lines Fuel line from the pressure regulator Filter/regulator by pushing in the locking tab, turning the regulator to unlock it and pulling the it straight up

To install:

0996b43f80208d0f.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Cut away view of the fuel filter/pressure regulator

  1. Push the fuel filter/regulator into the fuel pump module and turn to lock it into position.
  2. Connect the fuel lines and install the tank.
  3. Start the engine, check for leaks and repair if necessary.

May 07, 2012 | 2003 Dodge Intrepid

1 Answer

What does the fuel pressure have to be on a 1997 dodge intrepid


  1. Without vacuum applied to the regulator, the 3.3L engine fuel system operates at 55 psi (379 kPa). With the engine idling and the manifold vacuum applied to the regulator, the system operates at approximately 46 psi (317 kPa).
  2. Without vacuum applied to the regulator, the 3.5L engine fuel system operates at 48 psi (331 kPa). With the engine idling and the manifold vacuum applied to the regulator, the system operates at approximately 39 psi (269 kPa).
  3. The fuel system pressure varies with the different amounts of manifold vacuum applied to the regulator. If the pressure is NOT correct, record the pressure and remove the gauge.

Nov 12, 2011 | 1997 Dodge Intrepid

1 Answer

I have a hole in my gas line up by where it goes into the injectors in my 97 intrepid.how and what do i need to do to repair or replace it?


YOU NEED TO REPLACE THE FUEL LINE.YOU NEED TO RELIEF FUEL PRESSURE FIRST.BUT THE LEAK WILL BLEED OFF FUEL PRESSURE.ALL YOU HAVE TO DISCONNECT REMOVE THE LEAKING FUEL LINE AND INSTALL THE NEW FUEL LINE.

Nov 27, 2010 | 1997 Dodge Intrepid

1 Answer

Where is the fuel line located...I have to drain the fuel cell.


The fuel system is pressurized ... so you must relieve the pressure prior to doing anything with the fuel cell...
I find that this is easiest in the engine compartment at the fuel pressure regulator shrader valve ( looks like and opperates like a tire valve , only on the fuel line ).

Sep 25, 2010 | 1998 Dodge Intrepid

1 Answer

04 dodge intrepid sxt not picking up fuel, wont start


You may have to replace the fuel filter, the fuel pressure regulator or the fuel pump.

First I would check the fuel pressure and also check for leaks. If there are no leaks and the pressure is fine than your fuel injectors are probably clogged or you may have an ignition problem or even a compression problem.

If you don't have good pressure and there are no leaks I would first replace the fuel filter or the fuel pressure regulator. If problem still exists I would then check and replace the fuel pump.

If you need any help in any one of these procedures just post it and I will give you step by step instructions.

Mar 14, 2009 | 2004 Dodge Intrepid

Not finding what you are looking for?
1995 Dodge Caravan Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...