Question about Isuzu Pickup

Open Question

Isuzu npr timing marks

Injection pump marks and balancer timing marks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22156 Answers

SOURCE: need the timing marks for a 3.1 td 5 cyl diesel injection pump

isusu engine?? have you looked for a 8mm hole in timing gear that corresponds with a hole on plate behind then lock it in with a bolt ,remove bolt after tightening belt .DONT FORGET THIS ???.....if you cant find anything do it with no timing marks easy --- piston no 1 at tdc valves closed spin pump till fuel comes out of no 1 injector feed and lock it all together,indirect diesel is 6/8 ,,,,,direct injection is 12/16,,,,and turbo is 18/22 btdc

Posted on Dec 13, 2008

Ad
  • 1796 Answers

SOURCE: I need a Fuel Injection

Hi!!
Go to this site to download a manual. http://www.pdfoo.com/isuzu/248-6673-pdf.html
In case it does not work, go to this site to look for the info. you need www.isuzutruck.co.uk
Good luck!!

Posted on Sep 28, 2010

  • 827 Answers

SOURCE: jeep 3.1td timing marks and the injection pump timing marks?Does anyone know please!

try the Haynes or Chilton's repair manual available at your local library or parts store for a fee. Either way call ahead and check availability.
Best regards
Ck

Posted on Dec 04, 2011

ivan_whisker
  • 1013 Answers

SOURCE: 2007 isuzu npr overheating

sounds like you have back presure usually caused by air in the system not sure on model but some cars have a small valve that you can open to let the air out eg fiats have them hope this helps ivan

Posted on Oct 15, 2012

  • 978 Answers

SOURCE: 1991 isuzu npr prime fuel system

normally the primer is on the filtre and bleed screw there too
what i normally do is fill the fuel filtre with clean diesol and fit and then prime if you r have=ing real difficulty you could open pipes going to injectors and turn over ttill you see the diesol coming from pipes ,but normally just prime it it should start

Posted on Nov 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Isuzu 4BE1Valvr clearance how much


the 1 millionth post from an ISUZU owner
with:
no country stated! wow.... now that is a CHALLENGE !
no year
nor even what CAR its in. (car name,oops its no car)
its a diesel. large. over 4k lbs, is large here, by laws.
its used on NPR large trucks, this is not a truck forum here.

lash, try google yet or the isuzu dealer?
0.14mm (take this with grain of salt, its rumor)
http://www.answers.com/Q/What_are_the_valve_clearance_of_4BE1_isuzu_engine

id never use internet rumors to build engines
we dont have this engine here, I think,... but id have to drive to ISUZU and ask them and buy the book.


the 4BE1 is a 3.6L direct injection engine. It replaced the 4BC2 in Isuzu NPR's from 1987- non turbo, VE rotary injection pump or Zexel/Diesel Kiki A-type injection pump. Bore and stroke are both 105 mm. Power ratings in the last versions (NKR300)are 74 kW (100 SAE HP) at 3,500 rpm and 242 Nm at 2000 rpm.


this?

26340388-zwgx01iqucprn2jjycczfnxf-4-0.jpg

Nov 04, 2016 | Isuzu Cars & Trucks

1 Answer

Elf 4bc2 engine. how do I set injection pump timing?


4bc2 . ELF truck?
e 4BC2 is a 3.3 L direct injection diesel (otherwise the same as the 4BC1) sold in the Isuzu ELF and NPR trucks from 1982 to 1987



what year
what country?
i guess you think all engines work same in all countries and years?
wow.

did you ask ISUZU first? that be first. right, a book on your heavy truck.
finding free books in this truck, is hard, i gave up.


26011648-b5pjo3cin0lhc1b54v4xlnuy-4-0.jpg

Dec 17, 2015 | Isuzu Cars & Trucks

2 Answers

What causes blue smoke on Isuzu npr tipper dump truck?


Could be bad piston rings letting oil up into the head Could need engine work to repair.

Jul 12, 2015 | Isuzu Cars & Trucks

1 Answer

2005 Isuzu NPR new engine rebuilt injection pump no power on take off high end miss


find a good diesel mechanic.
no country stated, so no advice.
large trucks.

Mar 02, 2015 | Isuzu Cars & Trucks

1 Answer

A Isuzu NPR 4hf1 rotary pump timing marks set


Hi. If it has a rotary pump, the pump needs to be installed with the crank at 49 deg BTDC on the compression stroke cyl 1. Mark dot gear on pump with white paint. Line up dot gear on pump with line on pump bracket and install. Remove PRM sensor from bell housing and check if line on pump gear is still lined up with line on pump bracket.

Feb 05, 2015 | Isuzu Cars & Trucks

1 Answer

WHAT IS ISUZU 4BE1 ENGINE TIMING


Diesel !
cam ? timing? or the injector pump... ??????
ask Isuzu for a book.
wiki says, what is a space cab.>?? a 4,000 lb truck./van, sure.

The 4BE1 is a 3.6L direct injection engine. It replaced the 4BC2 in Isuzu NPR's from 1987- non turbo, VE rotary injection pump or Zexel/Diesel Kiki A-type injection pump. Bore and stroke are both 105mm. Power ratings in the last versions (NKR300)are 74 kW (100 SAE HP) at 3,500rpm and 242 Nm at 2000rpm.

Jul 31, 2014 | 1990 Isuzu Spacecab

2 Answers

4hj1 engine timing manual


Search Results from this store you can download the manual and solve your problem:)

Feb 07, 2012 | Isuzu Cars & Trucks

1 Answer

Hi ive got a 1996 isuzu bighorn ive attempted to change the timing belt but the injector pump pulley moved when i took the belt off. i put it back where i thort it was and tried a tooth either way but no...


Timing belt installation

1. Ensure locking bolts located correctly [4] & [5] in the picture below:

tdisline_32.jpg
CS = Crankshaft
CA = Camshaft
IP = Injection Pump

2. Ensure timing marks aligned [10].
3. Fit timing belt in clockwise direction, starting at crankshaft sprocket.

NOTE: "ISUZU" lettering on belt should be readable from front of engine.

4. Slacken tensioner pulley bolt [9]. Push tensioner pulley against belt.
5. Ensure belt is taut between injection pump sprocket and tensioner pulley as well as crankshaft sprocket and camshaft sprocket.
6. Position tensioner lever [8] against tensioner pulley housing.
7. Remove locking bolts from sprockets [4] & [5].
8. Apply a load of 10 ... 12 kg to tensioner lever. Use spring balance [11].
9. Tighten tensioner pulley bolt to 80 Nm.
10. Turn crankshaft slowly 45 degrees anti-clockwise. Use spring balance to tension belt.
11. Repeat tensioning procedure at 45 degrees intervals for one anti-clockwise turn of the crankshaft.

NOTE: DO NOT turn crankshaft clockwise during tensioning procedure!

12. Fit tensioner lever to original position. Tighten nuts [12].
13. Install: Injection Pump flange [6], Camshaft sprocket flange [7], and water pump pulley.
14. Install components in reverse order of removal & refill coolant.

tdisline_33.jpg
PLEASE DO RATE MY RESPONSE. THANKS!

Nov 27, 2010 | 1996 Isuzu Trooper

2 Answers

Isuzu npr 5.7 gas not starting on its own


ok I had same problem with my 1996 Isuzu npr 5.7 gas burner. on top of fuel tank are wires and cant remember if it was 3 or 4 but anyways one of those wires is your ground wire to the fuel pump its self. make sure the wire has a good ground on the frame and/or the bed body of the truck. wish you the best hope I could help you

Feb 05, 2010 | 2001 GMC W3500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...