Question about Cars & Trucks

2 Answers

2002 Montero limted is making a rubbing noise and stops when i apply tje breaks and I've heard 4 beeps from inside with no lights. I need help. I do have a bad rear converter....please help.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 887 Answers

You need new wheel bearings.

Posted on Nov 22, 2013

  • bspurlock36
    bspurlock36 Nov 22, 2013

    Are wheel bearing in the front and hub bearings in the rear? What am I to expect or happen until able to be fixed? What damage is it causing and will it effect? Worried single parent.....

  • John Tunney
    John Tunney Nov 22, 2013

    I noticed you have a bad rear differential. this would also cause a humming sound. could eventually seize and cause the rear wheels to lock up.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 75,066 Answers

Please calrify your qyestion.

Posted on Nov 22, 2013

  • bspurlock36
    bspurlock36 Nov 22, 2013

    I have a rubbing sound as I drive when I apply the breaks it stops and cont as I realease the breaks. I've heard inside the car a beep beep beep beep coming from the console without a light coming on. My brakes rotor all round are new and I've been told my calipars are rusty. I don't have any steering or braking issues just this annoying noise. Any suggestions.

  • bspurlock36
    bspurlock36 Nov 22, 2013

    Is wheel bearings in front and hub bearings in back? I'm confused

×

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: front wheel rub/grind not breaks

is the steering over locking,and catching the track rod end
is it a wheel balancing wieght catching on the steering jiont
is it the hub bearing /flange worn or loose
is the brake caliper loose
are the brake pads low
is the back plate catching on the brake disc

Posted on Dec 18, 2008

  • 14036 Answers

SOURCE: 2002 Buick Rendezvous - Rear Wiper, Back Up & Rear Plate Lights

look for rear wiper fuse and relay.because both circuits is tie together . look in glove compartment for the manual .it will show where all fuses and relays located.

Posted on Apr 07, 2009

  • 15 Answers

SOURCE: Rear Speaker in Montero Limited is bad

Item 21 (the upper interior trim piece) needs to be removed, prior to removing the bottom piece #22. The only screws that hold #21 in are at the handle at the top, then you just pop it out. There are about 6 screws on the bottom part.
387d4c6.jpg

Posted on Sep 02, 2009

  • 11057 Answers

SOURCE: ABS problem with GMC 2002 Sierra

its a low speed abs activation the problem is in the front sensors they need to be cleaned or replaced they [or one] probably has some corrosion on the sensor --[the 99 chevy tahoes had a limited recall over this issue and the fix was to remove and clean the abs sensor or if to corroded replace ] this problem doesnt set off an abs code or trouble light also sometimes the abs will activate by itself at under 4 mph without even touching brake

Posted on May 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 turbo vw beetle there's a weird noise coming from rear of car when stepping on break when comings to a stop anyone have an idea what could be causing this noise


no brake pad linings
there is a small spring plate that rubs on the disc when the brakes are applied if the pads are below safe thickness

Jan 09, 2016 | Cars & Trucks

2 Answers

Sound from undercarriage when braking


See if the noise is also getting louder as you turn one direction or the other. The rubber rubbing sound doesn't ring bells but I suspect the bearings going out on one of your wheels. If it makes a noise when breaking but get louder or better as you turn one direction or the other I would bet bearings. I would look at that.

Aug 31, 2012 | 2006 Chevrolet Cobalt LS

1 Answer

My anti lock brake light is on my 2002 mitsubishi montero limited


Shift into 4H for now, the light should stop flashing and then replace the freewheel clutch solenoid located under the air box at the fenderwell.

Dec 22, 2011 | 2002 Mitsubishi Montero

1 Answer

My 2002 chevrolet 4wheel drive makes a noise alot like that of a break rubbing.It stops as the speed increases, I changed all four brakes and rotors and also changed the universal at the rear end. what...


Make sure backing plates behind front & rear rotors aren't rubbing on rotors. Jack up each wheel individualy & spin. May also be emergency brake shoes rubbing inside drum inside rear rotors.

Jun 24, 2010 | 2002 Chevrolet Silverado

2 Answers

Loud rubbing noise from the rear tires.


well it soulnd like you need new brakes and you can adjust the parking break by going in reverse and applying the parking brake

Aug 02, 2009 | 2002 GMC Envoy

1 Answer

Hello i have a 2002 mitsubishi montero sport when it gets hot it makes noise when i turn more when i turn right then left and only when it is hot it sound like a cv joit maybe dont know o it only makes...


It also could be the brake rotor rubbing on the caliper pads as you turn, check the brakes before changing the cvu joint if the pad are worn and don't have much meat left replace them the noise may go away.

Jul 10, 2009 | 2002 Mitsubishi Montero

1 Answer

Just replaced calipers and pads on 2002 1500 Silverado LS/HD. Rear brakes make "rubbing" noise when driving; the noise immediately stops when I apply the brake. What's the rub? I've applied lube in all...


if your pads are new, it could be the one making the noise! in time it will go off, pads is still fitting itself to the worn part of the metal plate/shim!

Jun 18, 2009 | 2005 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...