Question about Cars & Trucks
The 30 amp fuse for the blower melted part of the fuse block. I need instructions on how to replace the fuse box
That's a lot of work. if its only the heater that is melted just cut two wires from that fuse and wire in a separate fuse between the two
Posted on Nov 22, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If your not getting power to the blower and the fuse is good then it is the resister. Common problem on these, but lots of times the motor is going bad and thats what ruins the resister.
Posted on Dec 26, 2008
i had the same problem and i did about 3 hours of research and bought a ohm meter got ready to pull it out and i wiggled a wire witch if i remember corectly was the relay harness and it started to blow it was just a bad conection it worked fie after that every one in a while i have to stick my hand under the passenger side and find the harnes and wiggle it back into place hope that helps
Posted on May 26, 2009
I do not have a manual for this car, so here is a general idea. Look at fuse box carefully to see how it it attached. There could be some screws or there could be a release lever. Keep me updated.
Posted on Jun 13, 2009
Tips for a great answer:
Oct 22, 2015 | 2003 Mazda Tribute
Jul 25, 2015 | Cars & Trucks
Feb 11, 2015 | 2002 Cadillac Escalade
Feb 28, 2014 | 1997 Oldsmobile 88
Mar 13, 2011 | 1994 Pontiac Bonneville
Oct 13, 2010 | 2004 Chevrolet TrailBlazer
Sep 18, 2010 | 2000 Chevrolet Blazer
Sep 03, 2010 | 2000 Saturn SL
Aug 25, 2009 | 2000 Jeep Grand Cherokee
41 people viewed this question
Usually answered in minutes!