Question about Kia Cars & Trucks
When stopping the car it wont shift back into park
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2006 Chevy Impala stuck in park
When you turn ignition on it releases a cable that is attached to the shifter also the shifter has a solenoid attached to it that is released when you step on the brake. Both times that I had the problem of button stuck and cant shift out of park the solenoid was sticking and wouldnt release .
Posted on Dec 27, 2008
the car will not start if the immo light is not lit. sometimes turning the key back and forth or removing it and locking then unlocking the car can sometimes remedy this.
Posted on Jan 10, 2010
The first thing to check in this case would be the bulb itself. Remove the 13 plastic body screws retaining the the black plastic shroud at the front of the engine compartment. Next, remove the 2 10mm bolts retaining the lamp assembly. Gently work the assembly loose and pull it away from the vehicle; make sure to keep the assembly supported if you don't disconnect all of the wiring harnesses attached to it. Squeeze the clamp on the wiring harness to the turn signal bulb and remove the harness. Turn the socket assembly to remove the socket and bulb. Gently twist and remove the bulb. You should be able to see if the wire filaments are still continuous.
If the bulb is good, look at the inside of the socket. There is a little copper strip that runs down the side. If it is not sticking out making a " V " shape where the point would touch the side of the bulb, that's generally gonna be the problem. The point of the "V" completes the ground circuit for the bulb. Using a paper clip with a small hook, a precision screwdriver, or something else thin that can give you leverage, GENTLY pull at the strip until it comes out enough to make a good contact. You could also get a replacement socket from the dealership. Ask about rate of failure on this part and other things that would bring about images of recalls, maybe you'll get it free but probably not.
Posted on Jan 31, 2011
Tips for a great answer:
Dec 07, 2016 | 2006 Kia Sedona
May 08, 2016 | 2006 Kia Sedona
Dec 02, 2015 | Cars & Trucks
Aug 14, 2012 | 2006 Kia Sedona
Sep 20, 2010 | 2006 Kia Sedona
Jul 23, 2010 | 2002 Kia Sedona
Jul 02, 2009 | 2003 Kia Sedona
56 people viewed this question
Usually answered in minutes!