Question about Cars & Trucks
When you do the pads you will notice wires coming out of the front hubs clean up the plug ins .. its for the abs if the contacts get dirty your lights come on . start here other wise it can get complicated. do the same at rear i dont know if you have rear disc brakes you may not ??
Posted on Nov 21, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: My stability system and traction
All three systems rely on some of the same sensors in order to operate.
In this case most likely is wheel speed sensors. By far the most common problem.
The system will need to be scanned to find out which is the offending one and be repaired.
Not all scan tools have the capability to read ABS systems. Make sure whoever you take it to has this available. Most good shops will have this.
If you have further questions on this, please ask me here, be glad to help.
Thank you for using FixYa.
Posted on Jan 17, 2011
SOURCE: I have a '06 Chevrolet
You can reset the computer by turning the key to the on position. Don't start the engine. Press the gas pedal to the floor and release it all the way. Press all the way to the floor and release. Press all the way to the floor and release. After the third time it will reset the computer.
PLEASE RATE! Check the 4 thumbs up.
Thanks! Have a GREAT DAY!
Posted on Oct 16, 2010
Hi! Sometimes this is caused by a faulty abs sensor. Two things to deal with it... you can clean the contact and if no luck on it have it replaced. Hope this helps and thank you for using FixYa!
Posted on Oct 10, 2010
We were having this problem...have your wheel bearing checked out. There was a sensor in the drivers side wheel bearing...once we replaced it (because it was going out) the ABS and Traction Control warning lights stopped coming on.
Posted on Jul 02, 2009
Tips for a great answer:
Jan 01, 2016 | 2007 Chevrolet Chevrolet Equinox LT
Apr 22, 2017 | 2007 Chevrolet Uplander LS Minivan
Jun 05, 2012 | 2007 Chevrolet Uplander LS Minivan
Jan 17, 2011 | 2008 Chevrolet Uplander
Feb 05, 2010 | 2008 Chevrolet Uplander
Nov 05, 2009 | 2007 Chevrolet Uplander LS Minivan
Dec 02, 2008 | 2007 Chevrolet Uplander LS Minivan
347 people viewed this question
Usually answered in minutes!