Question about Jeep Grand Cherokee

1 Answer

Heater motor blowing, nothing coming out of any outlet

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 141 Answers

If you mean no heat/air, then your heater core is clogged or your thermostat is not opening the valve.

Posted on Nov 21, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater doesnt blow anything fuse isnt blown


if your heater dosent blow through the vents at all you have a bad blower motor usually located on the fire wall of most vehicles

Dec 23, 2013 | 1984 Ford Ranger

1 Answer

2002 nissan altima heater problem


have 2002 altima,blower works no heat at idle and very little heat when accelerating.I changed carbon cabin filter,made sure little gear under dash to temp knob wasnt broken,flushed and bled system.Nothing worked so checked hoses to heater core and found inlet hose was hot,outlet hose was not.So investigated this problem and came to conclusion heater core was clogged.An easy way to check is to get car to normal running temp. put on heater and blowers at full.Go under dash on passenger side where counsel meets firewall,this is where heater core core inlet and outlet aluminum tubbing go through firewall,you will be able to feel both tubes one closest to you is outlet, so if this one is not hot and and other is your heater core is clogged.I detached both inlet and outlet hoses to heater core from water control valve.Then I blasted water with waterhose and nozzle set at jet,first through outlet hose to blow gunk out,then through inlet hose until water runs clear.Reatach hoses fill and bled system.heater works great nice and hot!

Nov 10, 2012 | 2002 Nissan Altima

1 Answer

My 1995 honda heater is blowing cold air.it wont blow hot.i changed the heater control valve.what am i to do.


try back flushing your heater core find the 2 hoses to the heater and start the motor let it run for a bit feel the hoses 1 should get hot and 1 should be a little cooler the 1 that gets hot is the inlet and the cooler 1 is the outlet remove them after the motor has cooled down and use a garden hose to back flush the core flush water through the outlet you dont need to use high pressure if you do there is a chance the core can crack and leak.

Dec 30, 2010 | 1995 Honda Accord

2 Answers

No air coming out of the vents


It sounds like the heater motor may not be operating. When you switch the heater fan on can you hear the motor running? If not then it may have blown the heater fan fuse, check the fuse's and then try it again. If the fuse is ok then it could be a faulty switch or fan motor.

Apr 02, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

1999 mercury villager put in new heater blower motor and motor blows but nothing out the vents and which way is motor supposed to turn


If it is factory Ford/Motocraft motor, it has an arrow on it for direction of rotation. Pull the hose off the motor and see if air blows out of it. It cools the bearing on the motor. If air comes out, dircetion is ok. Report back

Jan 24, 2010 | 1999 Mercury Villager

1 Answer

I have 1998 cadillac STS and the heater blows cold air only


this problem is caused by a defective air temp control blend door motor, this door and actuator motor is located inside the dash between the heater core and the AC evaporator core, it shifts airflow through the heater core or the AC core or mixes or blends the two for the desired temp at the outlets, the motor will have to be replaced. This is a very common issue.

Jan 21, 2009 | 1998 Cadillac DeVille

1 Answer

Replaced heater blower and relay. still wont blow on 89 park aven


Check the blower motor resistor. It could have a broken connection in it.

Jan 12, 2009 | 1989 Buick LeSabre

1 Answer

Heater does not blow hot air on full heat setting


the problem is caused by the motor that operates the air temp blend door motor in the heating ducts, it blends air between AC and heater core tro give desired outlet temp.

Dec 12, 2008 | 2000 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...