If it runs good no worries. Your check engine light will turn on if theres a problem in one of your sensor, reving it on hi rpm will normally give you a light..
Hi there. There could be a number of problems here, the three focus points should be a faulty MAP (Manifold Absolute Pressure) sensor or there might be a problem with VTEC if that's fitted on your particular engine and the other is the Crank Angle Sensor. Firstly, you need to check out the PGM-FI ECU and see what LEDs flashing, this will certainly help narrow down the problem. As a visual check, make sure all the vacuum pipe connections are in-place and there are no broken, cracked or loose vacuum pipes, especially to the MAP sensor. Failing that, you might need the help of the Honda Dealer - but that's what I'd be looking at firstly. Best regards. Scottech
i have problem wiring distrubitor can some one help me and tell me what wires a have to connect...
(More)
i have problem wiring distrubitor can some one help me and tell me what wires a have to connect .......
I just started working on the h22 and now need tyo know what is the small pulley and belt right near...
(More)
I just started working on the h22 and now need tyo know what is the small pulley and belt right near the dip stick? Is it ne eded or can remove? Please let me know.. Thank You