Question about 2003 Dodge Durango

Open Question

2003 dodge durango overheating problems - 2003 Dodge Durango

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 534 Answers

SOURCE: overheating 2003 dodge durango. What could be the problem??

When engine running, ensure no engine combustion gas bubbles in coolant resevoir (if so, the head gasket is blown).

Check cooling fans are operating ok (when required when car warms up), if not check
1) fuse,
2) relay operation,
3) heat sensor switch.

Replace thermostat.
When re-filling cooling system, bleed off any airlock as necessary.

Check for collapsing (soft) coolant hose on suction side of waterpump when engine revs above idle.

Posted on Sep 01, 2009

Ad
stevexmas007
  • 693 Answers

SOURCE: 2003 dodge durango 4.7L, water

Did it ever get really hot, If so it could have a head gasket problem,.You did just about everything, I would take and get presure tested. Could just be a calopased hose. Good luck on it.

Posted on Apr 23, 2011

SOURCE: i have a 2003 dodge

yes... overheating can cause issues in your piston/cylinder head. if your cylinder head is made from aluminum and not metal, overheating can cause cracks and bends in your cylinder head. if this cracks occur inside the combustion chamber, then proper compression cannot be attained. you need to rebore then resleeve your combustion chamber and change the pistons to fix this issue. this will also require resurfacing of cylinder head to ensure that it does not create leaks against crankcase.

Posted on Aug 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my dodge durango still overheating after i changed water pump?


Thermostat ? Radiator fan ? Blockage in radiator ? Leaking head gasket ?
What are the symptoms ?

Aug 04, 2014 | 2003 Dodge Durango

1 Answer

4.7 dodge durango has water overfill in resevior why is that


Is it overheating...like really quick. Maybe a blown head gasket.

Feb 10, 2013 | 2003 Dodge Durango

1 Answer

My 2003 dodge durango keeps overheating , i just had new radiator put in and it started overheating again but now it is overheating with a very loud screeching noise like a belt sound what could be ca


as for noise will have to inspect under hood,could be fan or belt or pulley ,water pump .these are some things it could...My suggestion for overheating is replace thermostat. If your car has electric cooling fan then it may not be working..turn defrost on and if fan kicks on then fan motor is good..Now this does not mean that fan is working properly because fan is controlled by heat sensor switch that kicks fan on when motor reaches heat range......Things i would have checked....hope this information helps and good luck and Please rate my post...

Aug 17, 2012 | 2003 Dodge Durango

1 Answer

Why is my 2003 durango overheating and everything is new


make sure the engine does not haveoil on it or cjust check your air conditner

Aug 14, 2012 | 2003 Dodge Durango

1 Answer

I have a 2003 dodge durango 4.7 and it is overheating which i already r&r the thermostat. fixed the problem a lil but not 100%. also check engine light turned on for second time both same code P0308...


yes... overheating can cause issues in your piston/cylinder head. if your cylinder head is made from aluminum and not metal, overheating can cause cracks and bends in your cylinder head. if this cracks occur inside the combustion chamber, then proper compression cannot be attained. you need to rebore then resleeve your combustion chamber and change the pistons to fix this issue. this will also require resurfacing of cylinder head to ensure that it does not create leaks against crankcase.

Aug 05, 2011 | 2003 Dodge Durango

1 Answer

2003 dodge durango 4.7L, water pump was leaking so I replaced it and added coolant. Then it started to overheat so I replaced the thermostat, it still was overheating so I replaced the fan clutch. It...


Did it ever get really hot, If so it could have a head gasket problem,.You did just about everything, I would take and get presure tested. Could just be a calopased hose. Good luck on it.

Apr 23, 2011 | 2003 Dodge Durango

1 Answer

Overheating 2003 dodge durango. What could be the problem??


When engine running, ensure no engine combustion gas bubbles in coolant resevoir (if so, the head gasket is blown).

Check cooling fans are operating ok (when required when car warms up), if not check
1) fuse,
2) relay operation,
3) heat sensor switch.

Replace thermostat.
When re-filling cooling system, bleed off any airlock as necessary.

Check for collapsing (soft) coolant hose on suction side of waterpump when engine revs above idle.

Sep 01, 2009 | 2003 Dodge Durango

1 Answer

2003 Dodge Durango is overheating


are you sure that you put the t stat in the right way??is there anything blocking the rad mud ect ect???did you put more coolant in it after changeing the t stat?...is the water pump working proper?...the head gasket may be leaking..this should help solve your issues

May 07, 2009 | 2003 Dodge Durango

Not finding what you are looking for?
2003 Dodge Durango Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...