Question about Toyota Tacoma
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
pull the E.F.I. fuse located under the hood on the drivers side, if there is more than 1 efi fuse pull them both along with the E.T.C.S. fuse (if there is one) for 1 minute or so. That should do it
Posted on Dec 23, 2008
SOURCE: 1996 toyota tacoma 4/4 check
The PO171 code
is a lean condition, the air/fuel ratio is too lean under certain
conditions, in most cases this can be remedied by replacing the mass
airflow(MAF sensor) it's located on the air intake tube that comes from
the air filter, just after the air filter, it has two phillips screws
and an electrical connector.
I amvery sure it is the mass airflow sensor.
Posted on Jan 10, 2010
An O2 sensor code is a tricky one. It could mean SEVERAL different things, and I know how bad it sucks to hear this, but your best bet is to take it in and have a diagnostic ran on it at either a dealer or a good mechanic shop with a computer they can hook up to it. I had an "O2" code come up a while back on another car I used to have, and literally spent weeks and hundreds of dollars trying to fix it, and never did. Finally out of desperation took it in, paid the $90, and they found the problem and fixed it in like 30 minutes. Something I would have never even thought of was causing it (can't remember off the top of my head). After that I stopped wating time and money on check engine lights. One comes on in my car, I take it to have it ran for free at and auto parts store just to make sure it's not a loose gas cap or something, just to get an idea of what I'm looking at, then go and make an appointment to have to hooked up to a diagnostic computer to track down the problem. Good luck, and hope this helps save you some time and money.
Posted on Apr 05, 2010
The easiest way is to get the kit that plugs into the taillight harness to adapt your plug. If one isn't easily available then you can use scotch locks to splice into your trucks harness. Use a test light to make sure you locate the right wires in your trucks harness and go by the wire diagram on the instructions from the plug to hook it up.
I hope this helps!
Posted on Jul 22, 2010
SOURCE: 1996 toyota tacoma check engine
Did you replace the o2 sensors beacuse of a trouble code or were you just guessing?You need to go to a parts store and have the codes pulled for free the address that problem and that should take care of your light.Good Luck!
Posted on Mar 12, 2011
Tips for a great answer:
Oct 14, 2014 | 1996 Toyota Tacoma
Aug 10, 2014 | 1996 Toyota Tacoma
Jul 25, 2013 | 1996 Toyota Tacoma
Dec 11, 2011 | 1996 Toyota Tacoma
Oct 24, 2009 | 1996 Toyota Tacoma
Jul 14, 2009 | 1996 Toyota Tacoma
Jul 08, 2009 | 2003 Toyota Tacoma
May 25, 2009 | 2000 Toyota Tacoma PreRunner
Mar 16, 2009 | 1997 Toyota Tacoma
85 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: