Question about 2009 Kia Ceed 1.6

Open Question

Kia ceed how remove rear wiper motor

Kia ceed how to remove rear cover wiper motor

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: 07 Kia Sportage 4x4 V6 Front windshield wipers stopped working.

o yeah take back to dealership where they will fix it for free

Posted on Aug 17, 2009

Ad
mycharmingli
  • 389 Answers

SOURCE: How do I remove the

I can't tell you how but you can go to this link and download the repair manual that provides the information that you need. There are several other optional repair and service manuals on this site also and you can select the one that you would need and as I said they are available for instant download and you wont have to wait days and days for it in the mail to get what you need done. http://www.tradebit.com/filedetail.php/102135042-kia-sportage-service-repair-manual-2005-2008-download

I hope this assists you in your mechanical endeavor and thanks in advance for good ratings.

Stormi

Posted on Nov 13, 2010

  • 40 Answers

SOURCE: kia ceed petrol does it have a timing belt

All 4 stroke motors have a timing belt. the belt runs from the crankshaft pulley to the camshaft to operate the inlet and outlet valves. any more questions just ask. Alex.

Posted on May 19, 2011

patrick_dier
  • 310 Answers

SOURCE: 07 kia ceed wont start

yes very familiar problem.first do you now where your starter,
sit on the engine.try this the starter looks like two round long
cilinders one big and one small on top the big one.you can find the,
starter when you follow the red cable from the batterie.that goes to the starter.there you see the little cilinder ontop the big one.
now take small hammer an tap it one or twice on the small cilinder.
just tap tap.and try to start.the engine will start but when you chut down the engine,you need to tap it again to start.so you need new starter.
this test is to be chore this is the problem.you can by restored ones,
they are cheaper and really good too.

Posted on Jul 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace Kia Ceed high level brake light


You either have to remove the red lens or the light housing has a pop out access cover to expose the bulb.

May 10, 2017 | Kia Cars & Trucks

1 Answer

HOW TO FIT REAR COIL SPRINGS TO A 2008 KIA CEED SW?.


You remove the coil by using special tools called coil spring compressors/holding tool fixtures then it is just a matter of unbolting it, on a car lift a 45 minute job.

Sep 13, 2016 | 2008 Kia Ceed 1.6

1 Answer

Replace rear wiper arm on a 2009 Kia Rondo?


If you are replacing the entire arm assembly, there should be a plastic cover that will pry off exposing a nut that will have to be removed at the base of the wiper arm Remove the nut and wiggle the wiper arm up and down to help it release from the wiper motor pivot. Install the new arm in the proper location and retighten the nut

Jun 20, 2015 | Kia Cars & Trucks

1 Answer

How do I replace heater hose in Kia Sorento 2006


remove wiper arms 14mm remove rubber strip & plastic covers then you can remove wiper motor assembly 10mm then unbolt steel panel 10mm now you can access hose ,

Jul 07, 2014 | 2006 Kia Sorento 3.5

1 Answer

02 liberty rear wiper dose not work plugin has power changed wiper motor still doses work


There is a nut under the black plastic bezel that needs to be removed. Here is the complete procedure for you to look at. Its possible that your arm isn't adjust at wiper motor...

REMOVAL
- Disconnect and isolate the battery negative cable.
- Remove the rear wiper arm from the rear wiper motor output shaft. (Refer to 8 - ELECTRICAL / REAR WIPERS / WASHERS/REAR WIPER ARM - REMOVAL).
- Using a small thin-bladed tool, gently pry at the notch in the base of the rear wiper motor output shaft bezel to unsnap the nut cover from the bezel (REAR WIPER MOTOR OUTPUT SHAFT NUT REMOVE/INSTALL). Be certain to take proper precautions to protect the outer tailgate panel and its paint finish from damage during this procedure.
- Remove the nut that secures the rear wiper motor output shaft to the outer swing gate panel (REAR WIPER MOTOR OUTPUT SHAFT NUT REMOVE/INSTALL).
- Remove the bezel and gasket from the rear wiper motor output shaft.
- Remove the trim panel from the tailgate inner panel. (Refer to 23 - BODY/SWING GATE/TRIM PANEL - REMOVAL).
- Disconnect the tailgate wire harness connector for the flip-up glass ajar switch from the flip-up glass latch connector receptacle.
- Disconnect the tailgate wire harness connector for the rear wiper motor from the motor connector receptacle (REAR WIPER MOTOR REMOVE/INSTALL).
- Loosen the two screws that secure the rear wiper motor mounting bracket to the top of the tailgate inner panel.
- Slide the rear wiper motor and mounting bracket forward far enough to disengage the two mounting screws from the keyed slots in the top of the tailgate inner panel.
- Remove the rear wiper motor and mounting bracket from the tailgate as a unit.

zjlimited_494.gif

1 - BEZEL AND GASKET
2 - OUTPUT SHAFT
3 - TAILGATE OUTER PANEL
4 - NUT
5 - NUT COVER

What you will need to do is to remove the small plastic cap on the wiper arm by prying it off with a screw driver. Then remove the nut that holds the arm onto the shaft. Then get yourself a battery cable puller (from auto parts store) and pull the arm off of the shaft..

zjlimited_495.gif

1 - SPARE TIRE
2 - WRENCH
3 - FLIP-UP GLASS
4 - PARK RAMP
5 - REAR WIPER ARM
6 - PIVOT COVER

Jul 19, 2011 | 2002 Jeep Liberty

2 Answers

How do I dismantle and reinstall a front wiper motor on a 2000 Kia Sportage?


moz-screenshot-6.pngmoz-screenshot-7.pngplay0027.gif
Wiper Motor

Removal & Installation
  1. Disconnect the negative battery cable.
  2. Disconnect the wiper motor electrical connector.
  3. Remove the four mounting bolts securing the motor to the firewall.
  4. Using a suitable prybar, carefully separate the wiper motor from the wiper linkage and remove the motor.

To install:
  1. Attach the wiper motor ball joint to the wiper linkage.
  2. Position the motor on the firewall and secure the motor with the four mounting bolts. Tighten the mounting bolts to 75 ft. lbs. (102 Nm).
  3. Connect the electrical connector.
  4. Connect the negative battery cable.play0027_0.gif

moz-screenshot-8.png

Nov 25, 2010 | 2000 Kia Sportage

1 Answer

My rear wiper has stopped working on kia sportage 2006. can hear switch ok and fuse ok, how do i remove trim to get to rear wiper motor


Test for power at motor.


Test for power at motor. If you have power, then replace.wiper motor. trim should be held on with panel clips that can be removed with a special panel removal pliers






if

Mar 11, 2010 | 2002 Hyundai Santa Fe

3 Answers

How easy is it to replace the front wiper motor on a 2004 ford escape ? Where is it located ?



Front Wiper Motor
Removal & Installation

NOTE A new wiper motor assembly comes with the linkage arm installed.
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove the windshield wiper mounting arm and pivot shaft
    WARNING Do not remove the wiper motor linkage arm from the wiper motor assembly. If the arm is removed, the wiper arms may not park in the correct location.
    NOTE Use a suitable tool to separate the wiper linkage arm from the wiper mounting arm and pivot shaft assembly.
  3. Remove the 3 bolts and the wiper motor.

    7f7866e.gif

    Fig. Wiper motor and linkage

To install:
  1. Install wiper motor and bolts.
  2. Tighten wiper motor bolts to 10 ft. lbs. (13 Nm).
  3. Install windshield wiper mounting arm and pivot shaft.
  4. Check wiper operation.

Rear Wiper Motor
- Removal & Installation
  1. Remove the rear pivot arm.
  2. Remove the rear wiper motor shaft nut cover
  3. Remove the rear wiper motor shaft nut.
  4. Open the lift gate window.
  5. Remove the rear wiper motor cover trim panel.
  6. Disconnect the electrical connector.
  7. Remove the 2 rear window wiper motor nuts
  8. Remove the rear window wiper motor.

    79be491.jpg
    Fig. Rear wiper motor view-2008 model shown, other years similar

To install:
  1. Install rear wiper motor and tighten mounting nuts to 62 inch lbs. (7 Nm).
  2. Reconnect the electrical connector.
  3. Install wiper motor cover trim panel.
  4. Install rear wiper pivot arm tighten nut to 53 inch lbs. (6 Nm).
  5. Install shaft nut cover.
  6. Check wiper operation.

Good luck (remember rated this post).

Feb 25, 2010 | 2004 Ford Escape

1 Answer

HOW DO I REPLACE A REAR WINDOW WIPER ON 2005 FORD ESCAPE?


Remove the rear pivot arm.
Lift the pivot arm to the upright position.
Slide the locking tab out.
Pull up and remove the pivot arm.
Remove the rear wiper motor shaft nut cover.
Remove the rear wiper motor shaft nut.
Remove the rear wiper motor cover.
Remove the rear wiper motor bracket nut.
Remove the bolt and the rear wiper motor.

Jan 29, 2009 | 2005 Ford Escape

Not finding what you are looking for?
2009 Kia Ceed 1.6 Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...