Question about Cars & Trucks

Open Question

2kd toyota hiace van not idling but can start

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Hiace Toyota

Near the foot-step on the front passenger door (open the door first!)

Posted on Mar 18, 2009

badnad
  • 1 Answer

SOURCE: How do you disassemble toyota hiace 2006 dash?

Its easy, The only tool you need is a plastic lever tool. Or can be done with big head screw driver (but car for the trims for it can get damaged)
Lever both side vents out, then pull on the trim gently outwards. (long piece from glove box to the end of the radio before the instrumental dash panel) Then pull the main inturmental dash out towards you as well. There may by plugs connected to the front panel. Disconnect that and it exposes the digital meter, I think it then takes only 2 x 10m bolts and the dash is out.

Posted on Dec 06, 2009

  • 1 Answer

SOURCE: how to change gearbox oil on a toyota hiace van...

Creating Gears Problem 1st and 3rd sleeping gears, how to romove this problem

Posted on Oct 17, 2010

  • 1 Answer

SOURCE: how to remove and replace the water pump in a toyota hiace van

van is overheating .thinks it may be water pumps

Posted on Mar 05, 2011

  • 184 Answers

SOURCE: how to reset timing belt

usually 2 options to reset toyota light.
1.remove small rubber plug in dash clear lense.use a long thin rod to reach in and push the small reset button at the bottom of the gauges.Light will extinguish.
2.remove the instrument panel and unplug all from behind to turn it over.Usually in the centre of the rear you will see two holes and 1 screw.for t-belt.shift the screw to other hole.refit dash ensuring all the plugs are refitted.Light should now be out.

Posted on Apr 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My toyota hiace with 2kd engine is producing a cloudy black smoke and hard stating what could be the problem


Black smoke means too much fuel .
Have you changed your air filter or is it clean. A dirty air filter will flood your engine.
Is your choke working properly?
Could be your carburetor float is sticking.
Not sure but there are computer sensors in some makes that could cause flooding if they are not working properly.
I am sure there are other things that could be the cause but you can start here.

Apr 17, 2017 | Toyota Cars & Trucks

1 Answer

Toyota hiace van


check your fuse

Dec 07, 2013 | Cars & Trucks

1 Answer

Valve clearance 1995 toyota hiace diesel van 3l


normally .010"hot inlet and .012" hot exhaust

Apr 22, 2013 | Toyota Camry Cars & Trucks

1 Answer

I have hiace 2009 2kd turbo i can't run it the edu and ecu ,carnck sensor are knew also the injectors are good but there is no electeic conect to fule pump and iinjectors i try all parts (cpu edu .in


Is this a translation from another language? I suggest you take English grammar and spelling lessons, then come back with a legible question so we can answer it. Please.

From what I can gather, there's no power to your fuel pump. Did you test it with an outside power source? How about the harness, is there continuity in all of the wires?

Nov 23, 2011 | Toyota Cars & Trucks

1 Answer

I have a 2kd-ftv motor in a toyota hiace van, it starts and runs for 3-4 seconds getting lower and lower in revs till it stalls , sometimes it doesnt stall and picks up after same amount of time and idels...


Hi, you need to firstly replace the fuel filter, the problem is the idle solenoid in the pump has dirt in the piston! From the passenger side of the engine remove the solenoid at the back of the fuel pump 2x 5mm Alan bolts, there is 2 solenoids in the pump the one closest to the block is fuel temp. After the idle solenoid is removed, in the solenoid is a piston held in place by a circlip and there is also a spring in there, clean out all dirt inside and reassemble replace both o'rings and reinstall your problem will be solved. I have just fixed one 2 days ago.

Oct 31, 2010 | 2005 Toyota Tacoma

2 Answers

Hiace van 2006 petrol engine not starting


check the ECU fuse and the efi fuse if the fuse is blown replace with the same rating and then attempt to start and also note if the mil comes on iyou have mil on then the vehicle is bound to start.

Nov 24, 2008 | Toyota Prius Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...