Question about 2006 Ford Fusion

Open Question

Where is the p2195 code sensor fuel ho2s11 located on a 2006 ford fusion 2.3l engine

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 101 Answers

SOURCE: P2195 Trouble code

There is a TSB for this car (Avalon) to replace both AF sensors and bank 1 exhaust manifold/convertor . Its covered under your 3yr/36k warranty.

Posted on Apr 24, 2009

Ad
tneubauer
  • 437 Answers

SOURCE: Bad evap sensor

This is sandwiched under the dash and requires dash removal to remove and replace.

Posted on Jun 11, 2009

billandrade
  • 6 Answers

SOURCE: P2195 CODE ON 2003 FORD EXPLORER SPORT TRAC 4.O

Hello,
Very common concern with the Explorer, Explorer Sport Trac and Ranger with the 4.0l SOHC engine! The upper and lower intake manifold gaskets fail, causing vacuum leaks..It can be Extremely difficult to detect these leaks, because they only leak intermittently (usually in the AM after a cold soak)... As the engine warms up they seal back up! Sometimes the vehicle will idle rough, surge or stall after initial start up, then the symptoms will clear after it gets to operating temperature... Usually there will be no driveability symptoms at all, except the engine light coming on and setting lean codes.. The gaskets have been redesigned to correct this concern..


Bill Andrade Ford Master Technician/ASE Master Technician

Posted on Sep 22, 2009

  • 972 Answers

SOURCE: 2006 Ford Fusion a/c not working

its inside the hvac box under the dash you may or may not have to romove the hvac unit to change it. circuit high means an open circuit so check connectors and such

Posted on Apr 15, 2010

L Holland
  • 70 Answers

SOURCE: Trouble code P0171, P2195 Ford Focus

Sounds Like your o/2 is bad, are you burning e-8, try adding some injector cleaner/seafoam, and put a tank of preimu gas in then reset the code.

Posted on Jun 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix code p2195


https://www.autocodes.com/p2195_ford.html

May 21, 2017 | Ford Cars & Trucks

2 Answers

Ford freestar 2004 where is the O2 sensor #1 located


There is 4 senors the bank 1 sensor 1 is located in front of the LH (Drivers side) catalytic converter
Hope this helps

Jun 22, 2014 | 2004 Ford Freestar

1 Answer

Car chugs and sometimes stalls while idoling. codes that come up are P0771, P0128, P0171, and P2195 any help is appreciated


First code P0771 is shift solenoid E is stuck or has a performance problem.Code P0128 could be low coolant,leaking or stuck open thermostat,faulty coolant fan (running to much) or faulty coolant temperature sensor.Code P0171 fuel system to lean usally its a dirty mas air flow sensor or a weak fuel pump,fuel filter or fuel pressure regulator. Code P2195 is oxygen sensor stuck lean bank1 sensor 1.I would check for low fuel pressure causing the lean condition or faulty injectors (clogged).Also i would replace the coolant temperature sensor.

Oct 25, 2012 | 2006 Ford Fusion

1 Answer

P2195 code and lack of ho2s11


code p2195, air fuel sensor b1s1 bad. Change the sensor and you will restore the power. Lack of HO2s11 means it is running lean. Change the sensor.

Oct 14, 2012 | 1998 Mazda 626

2 Answers

What's your problem?service engine soon light on code P0132,P2195, P2196


P0132 FORD - O2 Sensor Circuit High Voltage Bank 1 Sensor 1xicon.jpghttp://engine-codes.com/p0132_ford.htmlForum CodePossible causes- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Front Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
P2195 - O2 Sensor Signal Biased/Stuck Lean Bank 1 Sensor 1

P2196 - O2 Sensor Signal Biased/Stuck Rich Bank 1 Sensor 1

Jun 29, 2012 | Ford Cars & Trucks

1 Answer

My 2003 ford expedition service engine light is on an the code is reading p1132 what is wrong


Hello,
P1132 = Lack of HO2S11 switch. sensor indicates rich.
The HO2S11 is the upstream oxygen sensor. ( upstream meaning it's before the catalytic converter.)
This sensor is telling the ECM, ( electronic control module ), to increase the fuel, which is why it's indicating RICH. ( the fuel/air mix ratio should be 1 part fuel, 14.7 parts air )
The most common reason for your issues are the following.
1. Dirty air filter.
2. Faulty/dirty idle air control valve.
3. Faulty/dirty MAF, ( mass air flow ), sensor.
Until you're able to get this fixed, you are going to get poor fuel efficiency

I hope this helps you.
Thanks, Donnie

Feb 20, 2011 | Ford Expedition Cars & Trucks

1 Answer

2006 mustang came up with the engine warning code P2195 for the O2 sensor, what is this.


A P2195 means that the HEGO (heated oxygen sensor) O212 (O2 #1 for bank #1) is indicating lean at the end of a test is trying to correct for an over-rich condition.
The test fails when the fuel control system no longer detects switching for a calibrated amount of time

lots of possible problems including, but not limited to...
Short to VPWR in the harness or HO2S
Water in the harness connector
Open/shorted HO2S circuit
Corrosion or incorrect harness connections
Damaged HO2S
Damaged powertrain control module (PCM)

Excessive fuel pressure
Leaking/contaminated fuel injectors
Leaking fuel pressure regulator
Low fuel pressure or running out of fuel
Vapor recovery system


Apr 17, 2010 | 2006 Ford Mustang

1 Answer

P2195 Trouble code


There is a TSB for this car (Avalon) to replace both AF sensors and bank 1 exhaust manifold/convertor . Its covered under your 3yr/36k warranty.

Apr 01, 2009 | 2007 Ford Expedition EL XLT

1 Answer

P2195 Trouble code


In the exhaust manifold on the firewall side. Its not a o2 sensor. Its a AF sensor.(air fuel ratio sensor)
Covered under your 3/36k warranty.

Mar 21, 2009 | 2006 Toyota Camry

Not finding what you are looking for?

Open Questions:

See all 2006 Ford Fusion Questions

2006 Ford Fusion Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...