Question about 1983 Jeep CJ7
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1985 cj7 brakes
With the wheel off, give it good hit between the studs, like you were trying to put it on. Hit one side then the other, the drum will start to rock a bit, then pop off. You may want to put the wheel nuts back on as to avoid hitting the studs. Installing the brake shoes is not that simple, best you do one shoe at a time.If you look close there should be 2 different shoes for each side. Back off the adjuster to get the drum back on, this may take a few trys. Also check the brake drum , it may have a wear ridge that will need to be ground off. Hope this helps! Frankster016
Posted on Oct 24, 2008
if you alter the steering and suspension in any way as far as changing factory settings you need to get an alingment it sounds like you have to much negative caster
Posted on Nov 12, 2008
The brake light switch is located on the upper part of the brake pedal since it is activated by it. It should be the only switch with an electrical connector attached to the pedal.
Don't forget to rate this post!!
Posted on Sep 18, 2010
Testimonial: "awsome help. thanks for helping a guy that knows how to use tools but is kind of a moron sometimes!"
Tips for a great answer:
May 19, 2012 | 1985 Jeep CJ7
Apr 26, 2011 | Jeep CJ7 Cars & Trucks
Apr 25, 2010 | 1983 Jeep CJ7
Jan 08, 2010 | 1985 Jeep CJ7
Jun 19, 2009 | 1983 Jeep CJ7
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: