Question about 2008 Chevrolet HHR SS

Open Question

What is the torque on 2009 hhr front axle nut

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: what is the torque on the axle nut of a 99 malibu

First design nut (Pac-style nut painted black) 284 ft-lbs/385 Nm; second design nut (solid gray nut), 173 ft-lbs/235 Nm.

Posted on Mar 19, 2009

Ad
  • 72 Answers

SOURCE: Front Hub Bearing Torque specs to complete replacement

THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Posted on May 09, 2009

  • 333 Answers

SOURCE: Replacing front wheel hub assembly on 2006

Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs

Posted on Sep 10, 2009

Testimonial: "The info on the torgue specs was very helpful. I couldn't find it anywhere. Thanks a bunch!"

  • 599 Answers

SOURCE: 2005 Chevrolet Silverado 1500HD 4 wheel drive

177 ft lbs

Posted on Dec 09, 2009

  • 312 Answers

SOURCE: 2008 Impala axle shaft torque spec

118 ft lbs

Posted on Jan 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size axle nut for 2000ford taurus se


Axle nut size? - Taurus Car Club of America : Ford Taurus Forum

www.taurusclub.com > ... > Suspension, Handling and Brakes
Jul 23, 2011 - 8 posts - ‎5 authors 1996 Mercury Sable front axle nut. I have read that the size is 30mm but the socket that I rented (30mm in a ... 2000 Duratec SE White Wagon Axle nut torque question. - Taurus Car Club of America ...
11 posts
May 4, 2012
CV Axle nut size
11 posts
Dec 9, 2011
Why Does The Axle Nut Need Such A Big Torque
11 posts
Dec 7, 2009
2000 Ford Taurus Front Wheel Bearing And Half-axle ...
11 posts
Apr 18, 2009
More results from www.taurusclub.com

Sep 28, 2015 | Cars & Trucks

1 Answer

Front axle 2002 highlander


to remove front axle.to loosen front axle nut leave vechicle weight on wheel then just loosen front axle nut because axle nut torque at 217 ft lbs torquehard to loose axle nut with vechicle weight off wheel.okay. you need a 1/2 breaker bar and axle socket to loosen axle nut dont use 12 points sockets need go auto parts store buy right socket for axle nut.okay when you loosen front axle nut you need safely raise support vechicle. need to remove wheels remove fender apron seal remove transaxle fluid remove transfercase oil if you have 4WD.remove hub nut remove stabilizer bar link remove speed sensor remove tie rod end remove lower arm from the ball joint then slide the halfshaft from the hub then carefully pry the shaft from the transaxle.then install new front axle push in make sure front axle snap ring on front axle snap in place inside transmission just pull a little on front axle make its in place. when all done tighten front axle much as you can then when done putting every thing back in place.lower vechicle need torque front axle nut to 217 ft lbs.

Jan 12, 2013 | 2002 Toyota Highlander

1 Answer

Need torque settings for front calliper bolts on 2009 Chevy HHR


ive done millions of brakes and callipers not once have i torqed to specs on cllipers just tighten till its tough but not to hard or youll snap a bolt..

Sep 29, 2012 | 2009 Chevrolet HHR

1 Answer

Crv front axle nut torque spec


Hi , what is the front axel nut torque on a 2009 Honda CRV LX ?

May 18, 2012 | 1998 Honda CR-V

1 Answer

Axle nut torque


The correct torque specification for the FRONT axle nut on a 1999 Mercedes ML320 is 490 Nm or 361 lb/ft

Jan 07, 2012 | 1999 Mercedes-Benz C-Class

1 Answer

I need instructions on how to replace the wheel bearings on a 2008 hhr


The wheel bearings for ALL GM cars 2007-2009 ARE covered under the powertrain warranty...5 year 100K warranty that is. ...if you have a 2007-2009 GM car- even if it is a USED car and you are the second or 3rd owner? It's COVERED. call dealer to find out! While the wheel is on ground, loosen the large nut on the axle, Then jack it up, remove the caliber and rotor, unhook the ABS connector if you have it, remove the axle nut all the way, and then the 3 bolts that hold the hub assembly, tap the hub assy with a hammer until it slides out and the install the new one. the bolts that hold the hub on are behind backing plate. if you cant get to top bolt for hub, you can push axle in to make more room. make sure you torque all bolts. if you can not get torque wrench on back hub bolts. then tighten as tight as hard as you can with a socket wrench. but put correct torque on axle nut. call auto-zone and they should be able to tell you the axle nut torque. if no, call or visit dealer for this info. have a good day!!

Jul 26, 2011 | Chevrolet HHR Cars & Trucks

2 Answers

Front Hub Bearing Torque specs to complete replacement


THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Apr 24, 2009 | 2003 Chevrolet Silverado 1500

Not finding what you are looking for?
2008 Chevrolet HHR SS Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...