Question about 2006 Hyundai Sonata

Open Question

06 hyundai speed sensor color codes wire harness

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jyeager178
  • 2 Answers

SOURCE: oxygen sensor 1999 hyundai accent

Bosch website........free

Posted on Mar 31, 2009

Ad
emissionwiz
  • 76682 Answers

SOURCE: Im trying to connect my pioneer radio to my

Radio Constant Wire 12V+: Red
Radio Ignition Switched Wire 12V+: Yellow
Radio Ground Wire: Black
Radio Illumination Wire: Pink/Black
Radio Dimmer Wire: n/a
Radio Antenna Trigger Wire: n/a
Factory Amplifier Turn On Wire: n/a
Left Front Speaker Wire (+): White
Left Front Speaker Wire (-): Brown
Right Front Speaker Wire (+): Black
Right Front Speaker Wire (-): Yellow
Left Rear Speaker Wire (+): Blue
Left Rear Speaker Wire (-): Red
Right Rear Speaker Wire (+): Green
Right Rear Speaker Wire (-): Orange

Posted on Oct 06, 2009

ricksuddes
  • 3 Answers

SOURCE: Rodents chewed the wires leading from the harness

Rataway fragrance stops odors caused
by rats, mice, squirrels, etc... rataway_bottle.jpg
Makes one gallon when mixed
and protects the surface of areas used for nesting.

Rodents and other animals mark territory (your car, house, etc.) with their scent. Animals are attracted by this scent. Rataway fragrance gets rid of the scent. No lingering scent, no more attraction.

Rataway fragrance protects car engines, wiring, boats, motorhomes, machinery, heavy equipment, etc. when sprayed to protect the surfaces

Rataway fragrance is not a pepper spray.

If you are looking for an effective, natural control for odors, Rataway fragrance is it.

Again... Rataway fragrance can be used around children, pets, and service personnel.

What is Rataway Fragrance?Rataway fragrance is a spray that is very offensive to wild animals such as rats, mice, squirrels, rabbits, raccoons, dogs, cats, horses, skunks, and monkeys. Rataway fragrance is not offensive to humans.

Posted on Oct 18, 2009

ghost45
  • 1280 Answers

SOURCE: Need a wiring color code for the 2000 Hyundai

Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Posted on Nov 04, 2009

  • 1 Answer

SOURCE: 2006 hyundai santa fe stereo wiring color code

I was given two Lanzar 6.5 and two Pioneer 6.5 speakers. There is nothing wrong with my stock speakers, I just wanted to add a little more thump and clarity. I took off the front drivers side interior panel, Which wasn't all that bad, but i'm having major problems putting it back together. I'll get into that a bit later. I figured swapping the old for the new would be simple. Being it has two wires (pos/neg) going to the driver/speaker cone and two wires going to the tweeter portion that goes over the lower part, four wires total. The wires are White, Brown, yellow, and Black going into a black clip, then they turn black coming out the other side. I cut the four after the clip. My new speakers have only two posts to accommodate the driver and tweeter. So I left off the two for the tweeter and it sounded awful. I tried combining the two positive and two negative and hooking it up that way. That too sounded awful. The tweeter was squealing and chirping. I tried every configuration. They all sounded like ***. What am I doing wrong. I know people swap out stocks for after market all the time. I wanted to be sure my new speaker wasn't defective, so I tried all four (Both brands) with the same results. So I gave up and put the original back in. It sounds fine, just like it had before. But now I can't put the door panel back on. I know it's just tricky and i need more patience. I'm so bummed. I have these great speakers and have no idea why I can't install them. Do I need some aftermarket clip? It seems so easy, why is it so flappin hard? I've done this with other cars in the past with no issues. This four wire thing is killing me... Please HELP ME!!!!!!!!

Posted on Jan 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is code 320 where is it on engine


Ignition failure sensor, follow wiring from coils around back of cylinder headto a black "chip" looking thing bolted to the black steel bracket.

May 23, 2014 | Hyundai Sonata Cars & Trucks

1 Answer

Trouble shoot


I believe that's a Speed Sensor issue.

Diag:
1. Ensure mainshaft and countershaft speed sensors are installed properly. Disconnect mainshaft speed sensor harness connector. Using a DVOM, measure resistance between sensor terminals.

2. If resistance is not 400-600 ohms, replace mainshaft speed sensor. If resistance is 400-600 ohms, disconnect 25-pin PCM harness connector "B". Check for continuity between ground and 25-pin PCM harness connector "B", terminals No. 15 (Red wire) and No. 14 (White wire).

3. If continuity is present, repair short to ground in Red or White wire between PCM and mainshaft speed sensor. If continuity is not present, reconnect mainshaft speed sensor harness connector. Measure resistance between 25-pin PCM harness connector "B", terminals No. 15 (Red wire) and No. 14 (White wire).

4. If resistance is not 400-600 ohms, go to next step. If resistance is 400-600 ohms, go to DTC
P0720 (FLASH CODE 9) . Check for loose PCM harness connectors. Replace PCM with a
known-good unit if necessary.

5. Disconnect mainshaft speed sensor harness connector. Check Red wire for continuity between 25-pin PCM harness connector "B", terminal No. 15 and mainshaft speed sensor harness connector. If continuity is present, go to next step. If continuity is not present, repair open in Red wire between 25-pin PCM harness connector and mainshaft speed sensor
harness connector.

6. Check White wire for continuity between 25-pin PCM harness connector "B", terminal No. 14 and mainshaft speed sensor harness connector. If continuity is present, check for loose PCM harness connectors. Replace PCM with a known-good unit if necessary. If continuity is not present, repair open in White wire between 25-pin PCM harness connector and mainshaft speed sensor harness connector.

Mar 21, 2014 | 1998 Acura Integra

1 Answer

Car


Speed Sensor probably. Try:
1. Ensure mainshaft and countershaft speed sensors are installed properly. Disconnect mainshaft speed sensor harness connector. Using a DVOM, measure resistance between sensor terminals.

2. If resistance is not 400-600 ohms, replace mainshaft speed sensor. If resistance is 400-600 ohms, disconnect 25-pin PCM harness connector "B". Check for continuity between ground and 25-pin PCM harness connector "B", terminals No. 15 (Red wire) and No. 14 (White wire).

3. If continuity is present, repair short to ground in Red or White wire between PCM and mainshaft speed sensor. If continuity is not present, reconnect mainshaft speed sensor harness connector. Measure resistance between 25-pin PCM harness connector "B", terminals No. 15 (Red wire) and No. 14 (White wire).

4. If resistance is not 400-600 ohms, go to next step. If resistance is 400-600 ohms, go to DTC
P0720 (FLASH CODE 9) . Check for loose PCM harness connectors. Replace PCM with a
known-good unit if necessary.

5. Disconnect mainshaft speed sensor harness connector. Check Red wire for continuity between 25-pin PCM harness connector "B", terminal No. 15 and mainshaft speed sensor harness connector. If continuity is present, go to next step. If continuity is not present, repair open in Red wire between 25-pin PCM harness connector and mainshaft speed sensor
harness connector.

6. Check White wire for continuity between 25-pin PCM harness connector "B", terminal No. 14 and mainshaft speed sensor harness connector. If continuity is present, check for loose PCM harness connectors. Replace PCM with a known-good unit if necessary. If continuity is not present, repair open in White wire between 25-pin PCM harness connector and mainshaft speed sensor harness connector.

Mar 21, 2014 | 1998 Acura Integra Type R

1 Answer

Wiring diagram


O2 sensors just plug in.

Sep 01, 2013 | Hyundai Motor 2004 Sonata

1 Answer

Hyundai santaFe 2.7 v6 ecu connection to speed sensor and selector corrupted and the vehicle jumps from gear 1 to 3 failsafe.It does not engage the reverse gear.When driving on the sport/steptronic it


is no need to match colors. Try by using a tester and see which wire is earth,signal and play with it. Confirm whether it is the right part first.

Aug 10, 2012 | 2002 Hyundai Santa Fe

1 Answer

My 2009 Hyundai Sonata quit accelerating while driving in town. The ESC and check engine light came on. I was able to turn the car off and back on and the ESC light went off and acceleration worked...


This may not be your problem but it does bring the vehicle in fail safe you may have a warranty
Group TRANSAXLE
Number 09-AT-016
Date AUGUST, 2009
Model
1999-SONATA
2001-ELANTRA, SANTA FE & XG
2003-TIBURON
2005-TUCSON
2006-AZERA
2007-ENTOURAGE

Subject
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODES P0715, P0716, P0717, P0720, P0721 & P0722

An improperly functioning input speed sensor or output speed sensor may result in the following conditions:
^ "Check Engine" light on
^ Harsh P-R or P-D engagement shock
^ Transaxle in 3rd gear fail-safe
^ Diagnostic trouble codes 1. Using a GDS, check for DTCs in both the "Engine" and "Automatic Transaxle" menus. Record the DTC and description.
2. From the GDS, select:
^ Vehicle
^ "Auto Transaxle" menu
^ "Current Data"
^ "Input speed sensor" and "output speed sensor". Drive the vehicle and monitor the input and output speed sensors. If the sensors show:
^ Continuous output, the wiring currently has no open/shorts. Go to Step 6.
^ No output, go to Step 3
3. Check the wiring harness visually for an open circuit or short circuit to ground. Check for a pinched harness at the PCM/TCM attachment bolts.
4. Disconnect the connectors at the input and output speed sensor and PCM/TCM. Check for bent pins or pins not fully inserted into the connector.
5. If a harness open/short is found, repair or replace the ECM control harness between the PCM/TCM and transaxle and go to Step 8. If not, go to Step 6.

Aug 22, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

I have a 06 dodge ram 2500 diesel. I have 4 codes that came on. Code P0107 map sensor low, P0642 Sensor ref. voltage 1 circuit low, P0480 colling fan 1control circuit low, and P0483 fan speed, I went a...


Check for a shorted wire harness laying on top of the a/c compressor line down by the compressor. The harness will sometimes lay on the line and wear through shorting out the 5 volt reference.

Apr 16, 2011 | Dodge Ram 2500 Cars & Trucks

1 Answer

My hyundais check engine light is on so i took it to the shop and they told me that i need to change the speed senso so i bought it when i took it to the machanic so that he could change it he told me...


The vehicle DOES NOT have a vehicle speed sensor (VSS) per se. It DOES however, have speed sensors - INPUT and OUTPUT speed sensors on the transmission. What was the check engine light?... what was the code?

On the 2002 Accent, these sensors cannot be gotten (purchased) separately. The two sensors are part of ONE wire harness and can only be acquired together as one complete unit/harness.

Feb 08, 2011 | 2002 Hyundai Accent

1 Answer

Need to know what these codes mean for hyundai accent P1529, P1404, P0722


P1529- TCM MIL request signal failure
P1404- DTML Heater circuit failure
P0722- ATM Output speed sensor no signal

All these together indicate a possibly cut wiring harness failure, or other major circuit issue.

Apr 23, 2010 | 2002 Hyundai Accent

1 Answer

1991 hyundai scoupe codes


hi
code 21 (ECT) ENGINE COOLANT TEMPERATURE SENSOR
harness and connector OR (ECT) sensor
code 24 (VSS) VEHICLE SPEED SENSOR ]
harness and connector OR (VSS) sensor

WITH MY BEST WISHES

Jul 01, 2008 | Hyundai Motor 1991 Scoupe

Not finding what you are looking for?
2006 Hyundai Sonata Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...