Question about 2007 Mitsubishi Pajero 3.8

Open Question

Abs and brake light still on and more force need to stop car

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is a abs modular on a Escalade Cadillac?


Jesse, The module will not stop fluid to rear brakes, a bad master cylinder will,leaking lines, air in brake system, faulty metering block if equipped, collapsed flex lines or pinched brake line faulty caliper or brake cylinders,etc. will cause the possible feeling of no rear brakes.
(ABS Module components) the ABS speed sensors and the ABS control module . When the brake is applied, the ABS control module reads the speed data from the speed sensor and sends the correct pressure to each wheel to prevent any wheel lock up, eg. sliding/skidding Links below have more info.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Service Stability System AND abs Pump issue

ABS Control Module Replacement Service Cost YourMechanic

https://www.rockauto.com/en/catalog/cadillac,2002,escalade,5.3l+v8,1431695,brake/wheel+hub,abs+control+module,1844

Feb 24, 2016 | Cars & Trucks

3 Answers

When appling brakes i sometimes hear grinding and ticking noise and abs light is on


A grinding noise is usually an indication that the brake pads are worn out. You may also have a defective wheel bearing causing this noise and in turn can cause the ABS light to come on due to poor sensor contact. Have the brakes and bearings inspected soon to avoid unnecessary costly repairs.

Jun 07, 2015 | 2005 Kia Rio

1 Answer

ABS & BRAKE WARNING LIGHTS ARE ON - BRAKE FLUID AND HAND BRAKE CHECK OUT - HOW DO I RESET?


abs light on means no abs
but you don't need it to stop
one or more of the wheel sensors are bad

Mar 10, 2015 | 2002 BMW 330i

2 Answers

I have abs and brake light warning lights on, however, when checked by mechanic the abs brakes are working fine. whats causing light to come on?


FOR ONE THING CHANGE MECHANICS ! HE SHOULD HAVE FIXED THE PROBLEM, YOU MAY HAVE A SERIOUS BRAKE ISSUE ! IF LIGHT IS ON IT WILL NOT PASS INSPECTION ! YOU MAY HAVE AIR IN SYSTEM, NEEDS BLEED ! FLUID COULD BE CONTAMINATED , NEEDS BLEED OUT, REPLACED W/ FRESH FLUID ! ABS REQUIRES THAT THE REAR BRAKE CIRCUIT OPERATES BEFORE THE FRONT BRAKES, THIS PREVENTS SKIDDING, THE PURPOSE OF ABS BRAKES, CORRECT ? MASTER CYLINDER HAS SEALS, CONTAMINATED FLUID AFFECTS SEALS, BRAKE LIGHT WILL STAY ON UNTIL PROBLEM IS RESOLVED !!! REAR BRAKES IF SHOES NEED ADJUSTED, CLOSER TO DRUM ! THIS WILL HELP, BUT BLEEDING OUT ALL BAD FLUID & AIR IN SYSTEM IS PARAMOUNT !!!!!! BRAKE LIGHT SWITCH MAY NEED REPLACED, PROPORTIONING VALVE WHICH SEPARATES FRONT FROM REAR BRAKES , IS OUT OF BALANCE, THE VALVE NEEDS TO BE @ A NEUTRAL OR CENTERED POSITION, COULD BE STUCK TOWARD EITHER BRAKE CIRCUIT, MORE FRONT THAN REAR, UNDERSTAND ? THINK I COVERED YOUR ISSUE, PLEASE RATE MAY ANSWER ! THANKYOU,

Apr 02, 2013 | 2002 GMC Safari

2 Answers

Esp and abs light on in 2009 ford transit how do i eliminate them


Anti lock brake system light comes up when there is issue with car brake systems.It can be low brake fluid or faulty ABS fuse or its issue with brake system or assembly.Your vehicles brake system needs inspection.

To troubleshoot these issue,i suggest you to refer the help links provided below.There are direct links with accurate solution,for these specif issue.

Click the link below and follow the procedure:------

All types of ABS LIGHT / brake problems and repairs

http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

-------------------


ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

----------------
VCS and ABS lights go on and off intermittently on Lexus? http://howtobyme.blogspot.com/2011/11/vcs-and-abs-lights-go-on-and-off.html
-------------
The ABS and Traction Control Lights stays ON dash of car? http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html

------------- ABS & Brake lights warning indicator steady on dash and speedometer not working for Dodge Ram?

http://howtobyme.blogspot.com/2011/11/abs-brake-lights-warning-indicator.html

-----------------------
Battery Light and ABS Light on Dash http://whoisbyme.blogspot.in/2012/07/battery-light-and-abs-light-on-dash.html

-------------
Sometimes ABS light comes on while Driving? http://howtobyme.blogspot.com/2011/12/sometimes-abs-light-comes-on-while.html
----------- How Anti-Lock Brakes Work?

http://technoanswers.blogspot.com/2011/11/how-anti-lock-brakes-work.html

-------------
Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

-------------
Anti-lock brake light stays on all the time?

http://technoanswers.blogspot.com/2012/01/anti-lock-brake-light-stays-on-all-time.html

-------------------

ABS light comes on and Car makes Grinding noise?

http://repairhelpcenter.blogspot.com/2012/01/abs-light-comes-on-and-car-makes.html

---------------
ABS trouble codes for all models?

http://repairhelpcenter.blogspot.com/2011/11/abs-trouble-codes-for-all-1994-00-acura.html
------------

2008 Toyota Highlander: ABS warning light Blinking and OBD Error codes Coming?

http://technoanswers.blogspot.in/2012/05/2008-toyota-highlander-abs-warning.html

--------------


2003 Lexus ES: VSC, TRAC OFF, ABS lights ON?

http://technoanswers.blogspot.in/2012/04/2003-lexus-es-vsc-trac-off-abs-lights.html

----------------
2008 Toyota Highlander Hybrid: Warning Lights Abs, Vsc & Brake Are On?

http://technoanswers.blogspot.in/2012/04/2008-toyota-highlander-hybrid-warning.html

-------------


ABS & Brake warning lights remains steady on dash? http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html



------------
Can I drive the car without ABS fuse connected? http://schematicsdiagram.blogspot.in/2012/02/can-i-drive-car-without-abs-fuse.html

-----------
Where is ABS/TCS module located on 2005 Cadillac Deville

http://schematicsdiagram.blogspot.com/2011/12/where-is-abstcs-module-located-on-2005.html

------------------
ABS motor keeps running? http://schematicsdiagram.blogspot.com/2012/01/abs-motor-keeps-running.html

------------
When the car stops, abs pump turns ON? http://howtobyme.blogspot.com/2011/12/when-car-stopsabs-pump-turns-on.html

-----------
Replacing ABS unit on Buick Century? http://technoanswers.blogspot.in/2012/02/replacing-abs-unit-on-buick-century.html

----------------
2008 Toyota Tacoma: ABS causes Brake pedal fade? http://technoanswers.blogspot.in/2012/04/2008-toyota-tacoma-abs-causes-brake.html
-------------- Toyota Camry: Premature ABS Actuation? http://technoanswers.blogspot.in/2012/04/toyota-camry-premature-abs-actuation.html

-----------

How to replace ABS Modulator Control Unit on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-modulator-control.html

----------------


How to replace ABS Pump Assembly on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-pump-assembly-on.html

-----------


How to remove ABS Accumulator on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-accumulator-on-acura.html

---------


How to remove ABS Control Unit on Acura Integra?
http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-control-unit-on-acura.html

------------
These details will help.
Thanks.

Nov 24, 2012 | Ford Transit Connect Cars & Trucks

2 Answers

Anti-lock system light on


Anti-Lock Braking System (ABS)
Purpose Anti-lock brake systems (ABS) - generally also referred to as anti-lock
systems (ALS) - are designed to prevent the vehicle wheels from locking
as a result of the service brake being applied with too much force, especially
on slippery road surfaces.
The idea is to maintain cornering forces on braked wheels to ensure that
the vehicle or vehicle combination retains its driving stability and manoeuvrability
as far as physically possible. The available power transmission
or grip between tyres and carriageway should also be utilised as
far as possible to minimise the braking distance and maximise vehicle
deceleration.
Why ABS? Although today commercial vehicle brakes are designed to a very high
technical standard, braking on slippery roads often results in potentially
dangerous situations. During full or even partial braking on a slippery
road it may no longer be possible to fully transfer the braking force onto
the road due to the low coefficient of friction (friction coefficient (k)) between
the tyres and the carriageway. The braking force is excessive and
the wheels lock up. Locked wheels no longer provide any grip on the
road and are almost incapable of transferring any cornering forces
(steering and tracking forces). This often has dangerous consequences:
- The vehicle becomes unsteerable
- The vehicle breaks away in spite of countersteering, and starts to
swerve.
- The braking distance is significantly increased
- Tractor-trailer combinations or semitrailer trains may break away or
jackknife.
Load sensing valve influence On dry roads today's load sensing valves (ALB) alone are often capable
of preventing the wheels from locking if the vehicle is unladen; they also
help the driver to effectively grade the braking process on wet road surfaces,
but they are unable to prevent locking as such (no slip monitoring).
In addition, they are unable to counteract any overreactions on the
part of the driver, or any variances in frictional or adhesion coefficients
which may apply to different sides of the vehicle, or indeed to its different
axles (?-split road surfaces).
Benefits of ABS: Only the Anti-Lock Brake System (ABS)
- guarantees stable braking characteristics on all road surfaces.
- maintains steerability and generally reduces the braking distance
- prevents vehicle combinations from jackknifing
- reduces tyre wear.
Limits of ABS Although ABS is an effective safety device, it can not suspend the limits
defined by driving physics. Even a vehicle fitted with ABS will become
uncontrollable if driven too fast around a corner.
So ABS is not a licence for a maladjusted style of driving or failure to observe
the correct safety distance.
4
ABS Training Anti-Slip Regulation (ASR)
Anti-Slip Regulation (ASR)
Why ASR? Increasing the engine output (accelerating) on a slippery road surface
can easily lead to the maximum adhesion on one or all powered wheels
being exceeded causing them to spin, especially if the vehicle is unladen
or partially laden.
Spinning wheels when driving off or accelerating represent a safety risk
just like locked wheel do when braking.
Reasons - Wheels that spin transfer just as little cornering force as locked
wheels.
- They also no longer transfer any tractive power onto the road.
Consequences - Vehicles that do not move or get stuck.
- Vehicles that can no longer be steered, jackknife on uphill uphill
gradients, or swerve in corners.
Benefits of ASR ASR prevents the powered wheel from spinning and provides the following
benefits:
- Tractive power and cornering forces are maintained.
- Stable driving behaviour is ensured when moving off, accelerating
and negotiating corners on slippery roads.
- The indicator lamp (if installed) is used to warn the driver of slippery
road conditions.
- Tyre wear is reduced to a minimum, and the motor vehicle's drive
train protected
- The risk of accidents is further reduced.
ASR and ABS: ASR represents a worthwhile addition to an ABS-controlled braking system.
All that is required to turn ABS control into full ABS/ASR control is
an ECU with the additional ASR function and a few additional components
for controlling the differential brake and the engine. This why ASR
is only available in combination with ABS.
Even a differential lock for off-road use and ASR do not exclude but complement
each other.
Limits of ASR The traction capacity of an all-wheel driven commercial vehicle can not
be achieved by a motor vehicle with only one driving axle - not even with
optimal ASR.

anti-lock-system-light-vi1ay411tmzjz03ru4fkmxgj-5-0.jpg

anti-lock-system-light-vi1ay411tmzjz03ru4fkmxgj-5-2.jpg

Feb 28, 2012 | 1994 Cadillac DeVille

2 Answers

What is abs how it function


ABS is anti-lock braking system. It is a range of four sensors which monitor the braking capability when you apply the brakes. If you are harsh and stamp on the brake pedal there is a risk of the wheels locking up and sliding (screeching from the tires).

The ABS sensors modulate the brake caliper pistons andapply and let go the brakes very quickly. This stops the tires from skidding and you will feel a pulse through the brake pedal as the hydraulic system is forced to release the pedal slightly for a fraction of a second.

As ABS stops your car from skidding it allows you to turn the steering when you are braking hard. This is good news for avoiding accidents. If you lock the wheels on a non ABS car, you continue in the direction of the wheels - unless you release the brakes and reapply quickly (same method as ABS) this is called cadence braking but when involved with a potential accident the last thing on people's minds is to release the brake pedal. Having only owned older cars, cadence braking is one method I've learned, especially from driving in the snow.

I hope this helps you and please vote for me :)

Jul 16, 2010 | 2005 Toyota ECHO

3 Answers

Ebd light has come on..what is this???


It stands for Electronic Brake Distribution which is like an enhanced ABS that controls braking pressure based on weight distributuion. If it is on all the time and is not controlled by a switch, i would take it to the dealer to have them test the system.

Sep 12, 2009 | 2000 Daewoo Korando

2 Answers

Brake failure stop asap lights and stc/abs/brake/airbag light what does it mean and how bad is it?


I have had the same problem with my car for 3 months now. It is the ABS module that needs to be replaces. Ignore the stop ASAP light the brakes will still function as standard brakes. You just don't have ABS brake functionality or STC when those lights are on. Your car should still drive fine. Go on line and order a rebuilt ABS module for about $200 and the problem is solved. Hope that helps.

Jul 02, 2009 | 1999 Volvo S80

2 Answers

Traction control light and abs light


ok your problem is that your brakes are under force you shold get new brake pads ok

Jul 14, 2008 | 2002 Audi A4

Not finding what you are looking for?
2007 Mitsubishi Pajero 3.8 Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...