Question about 2001 Honda Passport
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Replacing A wheel bearing
hi from the uk seriously the best advice i will give you having done these is remove wheel then with foot brake applied? remove the drive shaft securing nut(cv joint ) tap the joint back ? then remove b/caliper assy then diconnect track rod steering end then remove the bolt and nut that secures the lower ball swivel joint (you may find this stiff but percevier try a lever bar and press suspension lower arm down ) then two bolts and nuts secure hub assy to strut ? remove these and you can pull complete assy off drive cv shaft now you are best to take the hub assy complete with rotor/disc to a local engineer shop or garage that has a press or bearing puller hydraulic press is best option ? and ask if they could remove the old bearing and fit new for a small fee ? believe me these bearings can be a cow and if you want a quick turnround? this is best way rather than potential damage by trying to hammer bearing races out ? just a little more advice clean up/wash off assy before you take it to shop it will be more helpfull to mechanic to work on be sure you renew the cv hub nut and re torque after reassembly hope these instructions help you ? best wishes
Posted on Nov 11, 2008
there is a hub and a bearing assembly...usually you need to press the bearings into that hub...need a press to push out the old and press in the new...i replaced mine last year by going to the junkyard and taking out the hub and bearing assembly and just putting the whole thing into my car...much simpler..plus you learn how it goes together by taking it out in the boneyard..no press needed...plus if its genuine honda parts from a honda..(you can match the markings) its likely to be a very good part for a long time. Being used isn't always a bad thing as far as honda parts are concerned.This is from my own experience hope this helps you.
Posted on Mar 12, 2009
Tips for a great answer:
Dec 09, 2015 | Kia Cars & Trucks
Nov 06, 2015 | 2002 Kia Rio
Sep 09, 2015 | 2005 Mercury Mariner
Aug 16, 2015 | Honda Cars & Trucks
Aug 03, 2014 | 2002 Mitsubishi Lancer
Feb 22, 2012 | Ford F-250 Cars & Trucks
Apr 09, 2010 | 2003 Ford Explorer Sport Trac
Apr 07, 2010 | 2003 Chevrolet Suburban 1500
Oct 23, 2009 | 2006 Hyundai Sonata
Jul 26, 2008 | 2004 Ford Crown Victoria
166 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: