Question about 1995 Toyota Previa
My brights were working intermittently and then stopped altogether. low beams still work but worried they might stop on me at night? Expensive fix or where to start narrowing it down with an easy fix.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: LOW BEAM LIGHTS
Hi Rich Million,
Check the bulbs for the low beam problem and if they're ok, check the fuses under the bonnet (hood) which are found in the fuse box. If you've already checked those, go to the fuse box inside the vehicle.
Still no luck....remember that there are fuses and relays inside the cabin behind the kick panel.....You may find that there is a problem with the main fuse box.....If you drive over rough terrain, check the connections under the main fuse box....even if your roads are all smooth, it's still worth checking.....
Posted on Sep 25, 2008
SOURCE: Low Beam Headlights Not Working
to troubleshoot i would suggest buying a new headlight if the new one works just buy the other one it is not uncommon for just one beam to go out hope this helps regards jim
Posted on Mar 18, 2009
Your switch must be working since your indicator is telling you when the high beams are on, so my guess is that your bulbs are faulty. The high beam part. They probably burnt out one at a time, so you didn't notice until the second one went. Change your bulbs, and see if that solves it. If not, let me know.
Posted on Jul 23, 2009
This is slightly counter-intuitive, but the plastic lens needs to go in and up before it comes out. After removing the two screws, use something thin and flat to pull down on the underside painted part of the wing between the two screws. A little bit of prying downwards. Two raised lips become visible - they are holding the lens from being able to be pushed up and in. A second pair of hands could help. Then use your thumbs on the lens close to the screws, gripping with your fingers on the top of the wing and squeeze up. POP!
Posted on May 18, 2010
Tips for a great answer:
Jan 16, 2015 | 1998 Toyota Sienna
Sep 03, 2008 | 1990 Toyota Land Cruiser
Apr 22, 2014 | 2003 Toyota Avalon
Aug 06, 2012 | 2007 Toyota Corolla
Jul 29, 2010 | 1994 Toyota Previa
Sep 22, 2009 | 1995 Toyota Tacoma
May 16, 2009 | 1995 Toyota Previa
Jan 29, 2009 | 2000 Nissan Maxima
Dec 14, 2008 | 2006 Toyota Camry
43 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: