2001 ford explorer sport,6 cylinder,rough idle and stalling....unplugged mass air sensor...seems to idle fine then...can u help me?
If there is a Auto Zone around your area, have them scan the Explorer for any DTC codes since it's fee of charge. But in the mean time buy a can of MAF cleaner and follow the instructions and also buy a can of Trottle body cleaner and follow the instructions on the can. Clean the MAF and the Throttle body, also try to get the Idle Air Control falve cleaned too which is on the throttle body. So use up the whole can of Throttle body cleaner and it would not hurt to use two cans. Once everything is cleaned that should fix the problem, the other thing to that would cause your poor idle and stalling is a bad or dirty EGR valve which can be cleaned with Carburetor cleaner since it's stronger then the Throttle body cleaner, just remove the EGR and spray the Carbon build away and place back in place. Note: the Carb cleaner is to strong for the gaskets used on the throttle body so don't use it on the throttle body. Good luck and this should help get your Explorer running 100% soon.
Jul 09, 2009 |
2001 Ford Explorer Sport