Question about 1995 Pontiac Grand Prix

1 Answer

No crank secruity light flashing

Car is not cranking over secruity light is flashing

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

Car is not recognizing your chip key - if you have a 2nd chip key see if that one works, if so replace key (and have it programmed to car by dealer).
If 2nd key also does not work = then it's with the ring receiver that is part of the 'lock assembly' (ie ignition), and that may need to be replaced.

Posted on Nov 21, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's your question?my Pontiac Montana van won't start or crank & battery very good


Any warning light's lit on the Instrument cluster ? SECRUITY / CHECK ENGINE ? Battery good but how about the battery cables ? Check the starter relay , do you know what that is an where it is ? I would suggest you do a voltage drop test on the starter circuits an test for voltage an control at the relay ! Relays Understanding Diagnosis and Testing Relayed Circuits Pt1

Aug 27, 2015 | Pontiac Cars & Trucks

1 Answer

I have a 1997 gmc 5.7 vortex that will not start


Did you check to see if there is spark at the spark plugs ? Try an spray some carburetor cleaner into the throttle plate an see if it tries to start . Are there any lights lit on the dash , check engine , SECRUITY etc.. Does the engine crank over an no start or no crank no start ?

May 18, 2015 | GMC Cars & Trucks

1 Answer

I have no spark on my 1999 chrysler sebring convertable


You will need at least a 12 volt test light to check the cam and crankshaft sensors. If either one is bad, the auto shut down relay will not ground the PCM. Remove the 4 pin electrical connector from the coil. one of the terminals is a 5 volt feed. Connect the light to that terminal and clip the other to ground. Turn the key to the on position. the light should flash once. If it does not flash the problem is in the ASD relay or its circuit. If it flashes once, try to start the engine. (don't worry, it can't start.) See if the light flashes during cranking or not. If not, return the key to off and then disconnect the crank sensor wire connector and try again. If it flashes as you crank the engine now, then the crank sensor is bad. If it does not flash during cranking then the cam sensor is probably bad. They are both easy to access and replace. The PCM could also be bad, but the cam/crank sensors are a more common problem. A repair manual is a cheap investment and could be helpful. Good luck.

Feb 28, 2015 | 1999 Chrysler Sebring LXi

1 Answer

99 chevy lumina wont start and the secruity light flashes


This is a pretty common occurence in GMs. Go to this link, try the 10 minute quick fix. If that doesn't work, you'll be looking at taking it to the dealer, or bypassing the security system. You can bypass it yourself. Go to this link for info and "do it yourself" options. http://vatspasslockpasskeysecurityhelp.yolasite.com/

Oct 20, 2011 | Cars & Trucks

1 Answer

Engine crank . but would not start . new fuel pump, good spark out from ignation coil, I pull out the nozzle I notice no out fuel .suzuki vitara jlx .


use a injector test noid light at the connector while cranking and see if it flashes if it doesnt flash check all fuses and check voltage to crank shat sensor if its there suspect bad crank shaft sensor

May 30, 2010 | 2000 Suzuki Vitara

1 Answer

How to test crank sensor and ecu 0n 1992 eclipse 1.8L . Cranks has no spark.


connect a test light to the plug on the ignition coil with it disconnected and crank the engine. if the light flashes the crank sensor is ok and you should replace the ignition coil. if it doesnt i would replace the crank sensor.

Nov 17, 2009 | 1992 Mitsubishi Eclipse

1 Answer

My grand am won't start the secruity light is on


TRY THE RELEARN PROCEDURE.....INSERT KEY IN IGNITION, AND TURN TO THE RUN POSITION,,DO NOT CRANK THE ENGINE..LET CAR SET WITH KEY ON FOR TEN MINUTES.. THEN TURN KEY OFF AND THEN BACK ON FOR ANOTHER TEN MINUTES... AGAIN TURN OFF THEN BACK ON FOR THE LAST TEN MINUTES... AFTER TIME IS UP TURN OFF REMOVE KEY AND REINSERT AND ATTEMPT TO START CAR.. IF STILL NO GOOD TRY A SPARE KEY IF YOU HAVE ONE IF STILL NO GOOD TAKE YOUR KEY TO DEALER FOR REPRORAMMING

Oct 10, 2009 | 2005 Pontiac Grand Am

2 Answers

Security light flashes car cranks but won`t start any way to bypass security .


turn key on for 10 minutes until light stops flashing then try to crank car over

May 23, 2009 | 1999 Oldsmobile Alero

Not finding what you are looking for?
1995 Pontiac Grand Prix Logo

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...