Question about Buick Terraza
There is something in the electric door lock mechanism dragging across something. You will probably need to take the door panel off to see what is dragging, but I don't think this is a real problem that you need to be concerned with for quite awhile
Posted on Nov 21, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
2 possible solutions. First clean the door pin contacts(multiple spring loaded pins on door side and matching plate on body) with a scotch pad until shiny gold color again. Second the rear edge of the door should be 1mm inside the body opening when closed. If those are correct it is going to take a software download from a dealer to the door control module to fix this. Otherwise you will have to pull the psd fuse and breaker from the right side dash fuse box.
Posted on Jun 23, 2009
SOURCE: Venture van power door problem
It sounds as though one of the proximity sensors is faulty. Also try giving the tracks for the door a good shot of white spray lithium grease. The door may be binding enough so that the emergency reverse is kicking in.
Posted on Jul 30, 2009
the door track cable on the right side will have a broken wire in it,the drivers side will be the door control module inside the door
Posted on Sep 04, 2009
Tips for a great answer:
Jul 12, 2015 | 2005 Buick Terraza
Mar 06, 2014 | 2006 Buick Terraza
Jan 21, 2013 | 2006 Buick Terraza
Jan 11, 2013 | 2006 Buick Terraza
If your vehicle has
the dual power sliding doors, both doors will have
to be reset. To reset a door, do the following:
1. Check to be sure the power sliding door is
unlocked and securely closed.
2. Turn the ignition to LOCK.
3. If the power sliding door overhead console
switch is in the override (deactivation)
position, return to the activation position.
4. Open the sliding door using the remote
keyless entry transmitter, overhead console
switch, or passenger switch. Allow the door to
travel fully open.
If the door does not travel to the fully open
position, press the overhead console switch to the
override (deactivation) position and slide the
door fully open and closed. Check for foreign
objects in the tracks. Repeat the procedure starting
with Step 1. If the door resists travel to the fully
open position, see your retailer for service.
Dec 27, 2012 | 2006 Buick Terraza
Jun 28, 2011 | 2006 Buick Terraza
Jul 19, 2010 | 2007 Buick Terraza CXL Wagon
Oct 07, 2009 | 2006 Buick Terraza
Aug 10, 2017 | 2006 Buick Terraza
84 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: