Question about 2000 Dodge Durango

Open Question

Cant find fault code because computer has been cleared

Engine wont fire battery died and computer cleared so i cant find the fault code

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why does 2005 Kia Sorento die while driving

You need to run an engine control module scan for fault codes Known as an OBD2 fault code test.. Autozone and others do this for free. If no fault show then hook up a test fuel gage the next time it stalls and see if maybe the fuel pump is failing.

May 02, 2017 | 2005 Kia Sorento

1 Answer

2002 ford taurus p1633 code happened after my battery died and then was jumped started. also battery is 525 or 550 cc amps. Is battery too small?

Hi Anthony, I do not have the code you have reported, but I'm guessing it is to do with the starter signal and has been recorded when the battery failed. I suggest you have the fault code read, identified and then cleared with the use of a diagnostic scan and if it returns the read out will have identified the area of concern, I do not believe the size of the replacement battery is an issue. Regards John

Dec 01, 2012 | Cars & Trucks

2 Answers

Hi idil then died wont fire up

The following are the general instructions on the start of diagnosing any electronically controlled engine or transmission problem.

The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems.

Oct 10, 2012 | 1996 Ford Explorer

3 Answers

I've got a 99 GMC but it died on me a couple of weeks ago.. I've had a friend hook it up to a diagnostic machince and it said cam sensor.We zerod out the code and my truck still doesn't fire... it turns...

Did you replace the cam sensor??? A code in the computer won't stop it from running, it just tells you there is an issue. It will clear itself when the issue is fixed. (After some driving)
Back up and see what is missing, spark or fuel. (Note...a working fuel pump may still not get fuel, as the injectors need to be "fired" to allow fuel into the engine.)

Apr 10, 2010 | 1999 GMC Sonoma

1 Answer

97 dodge neon

make sure your not getting oil down into the holes where plugs go this can mess with the wires.Is it actually skipping?

Sep 10, 2008 | 1997 Dodge Neon

Not finding what you are looking for?
2000 Dodge Durango Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides