Question about 2001 Dodge Ram 2500 Truck

1 Answer

When jumped my truck runs but wont start again. i replaced battery and it still wont start

I replaced my radiator and then went to work the truck started fine. i finished the job in three hours and then tried to leave but truck wouldnt start so i got a jump from a friend. it made it home fine but when i turned it off it woulkdnt start. i replaced battery today and its the same problem. except now i dont even hear the starter clicking now. PLEASE HELP!!!!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Check the resistance on the wires from the battery to your fuse panel and your ground wires also check to make sure you have good connections inside your fuse box if all is good there try to bench test the starter by applying a direct 12 volt power supply to.

Posted on Nov 20, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 49 Answers

SOURCE: car wont start radio,wipers,gauges,turn signals dont work

Check the battery cable ends to be sure they are tight and wont twist, I had this happen on my 96 grand caravan two years ago.

Posted on Aug 21, 2009

  • 13 Answers

SOURCE: 2001 dodge ram 1500 wont start

1st is the batt. old? second it could be the batt. cable ends when you jumped it the jumping vehicle made a connection the third poss able option is the starter
however if the batt. is old and bad it will make the computer scramble and fail to fire up even if it rolls over, disconnect batt for 2 min. jumping will not hurt it iether as long you are doing it in a safe way

Posted on Jul 19, 2009

keemo68
  • 1263 Answers

SOURCE: clicking noise..car won't start

does it crank over at all?

Posted on Aug 30, 2008

  • 2 Answers

SOURCE: When I turn the key to crank my Dodge Ram 2500, nothing happens.

Is this a manual or automatic tranny? I would be looking at the gearshift selector, did you try starting it in neutral, as opposed to park, if it's an auto, and how about a switch on the clutch pedal to prevent starting in gear, if it's a manual? How about wiring to the neutral safety start switch? Any fuses, circuit breakers been checked? What year truck?
I'm just throwing things out there, just to check before you spend any more money that you don't have to.
I could use a battery, right now- got an extra one?
:-)

Good luck and keep us posted.
Vetteman_72@yahoo.com

Posted on Dec 24, 2008

  • 1 Answer

SOURCE: When I turn the key to crank my Dodge Ram 2500, nothing happens.

your starter solenoid is out. may have even blown a fuse under the hood in the fuse box in front of the driver. i believe it is a 30 amp.

Posted on Aug 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 nissan frontier xe. starter went out, replaced started. worked for a couple days and went out again, starter had factory defect, put new starter in and still wont turn over,just clicks a lot. all


When you get your Frontier started after jump starting it, does it stay running? If it does, you probably just have a bad battery. If you have a battery and brake icon come on, on your dash, you probably have a bad alternator. you could go to auto zone and they will be able to test your battery.

Mar 06, 2014 | Nissan Frontier Cars & Trucks

1 Answer

Suzuki wagon r+gl check engine light keeps flashing and wont start after battery change


the engine (there are more than one engine)
has a distributor.
"have spark at coil down to dizzy but no spark at plugs"
this can mean only 2 things.
1: spark wires are dead. all 4, kinda hard to believe huh?
2: the dizzy is way off time. so time the dizzy and now spark
lands on each wire term.
if not a dizzy engine, post exact version of engine and country.

Apr 14, 2013 | Suzuki SX4 Cars & Trucks

1 Answer

Polo gti battery light wont start


Sounds like your alternator is not working, if you can get the engine running and have access to a volt meter check the voltage on the battery terminals, With the engine running you should see in excess of 13V

Jan 29, 2012 | Volkswagen GTI Cars & Trucks

1 Answer

97 Saturn sl. battery went dead,,replaced


Did you check the alternator? if it is faulty the car will drain all the power from the battery until it goes flat

Jul 09, 2010 | 1997 Saturn SL

1 Answer

95 F250 not starting


You said you tightened the battery cables, did you check the other end of the negative where it bolts to the engine. When you tightened the cables you also used a battery brush and cleaned the posts and ends?

Mar 27, 2010 | 1995 Ford F250

3 Answers

Battery went dead in 19 degree temp. Jump started


the only way to test a battery is do whats called a "drop test" on it they hook up a tool that puts a very heavy load onto the battery and if it holds its volts for 30 seconds its a good one,,,kind of kill it or cure it! however if the battery go's flat on you can you still open your car? and the radio coad and alarm coad will be lost, so dont just unhook the battery with out powering the car with another battery first,,,use jump leads to do this,

Jan 05, 2010 | 2006 BMW 750Li

1 Answer

I went to start my car today (2002 pontiac aztek) and it did not start. My husband jump started it. It started. Let it ran for 10 min. and then went down the rode to a market. I kept my car running. On my...


Your problem is either the Alternator isent charging its 13.5 volts and the battery is flat or wont hold the charge SO do this.
Jump start engine again let it run for 2 minutes then turn on lights,, the head lights should go bright at 13.5 volts. it engine cuts out..and the lights dont go bright,, then the Alternator is not charging,,,, If they go bright and still cuts out the batterys NO GOOD.
Replace battery or get it checked outit must hold 12volts all the time Let me know how you get on.

Oct 06, 2009 | 2002 Pontiac Aztek

1 Answer

05 ford escape wont start. jump started it and it started fine but only runned for a few minutes and the engine started to stall and went off. tried to start it again and it wont turn with the same...


okay try this....talk to your parts store and get a battery load tester, and find out if the battery is indeed dead. My guess is it sounds like the Altenator is dying. they are around 50-100 and can be install by a pro in minutes.

Jun 16, 2009 | 2005 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...