Question about Cars & Trucks

Open Question

Spec Torque toyota corolla flywheel torque settings 1.6 gle 2004 model

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 375 Answers

SOURCE: Flywheel bolts torque settings

Check with your local auto parts store. Or buy a repair manual

Posted on Jul 01, 2008

SOURCE: Torque spec for flywheel bolt: Isuzu 2.5 diesel engine

normally 110 nueton metres. use nut lock and once you have torqued you will feel if you have to tighten it a bit more.

Posted on Aug 15, 2008

garyq1970
  • 73 Answers

SOURCE: 2001 Toyota Echo Wheel Bolt Torque?

Looks like Corolla and Echo have the same spec. 76 ft-lb.

Posted on Aug 25, 2008

joecoolvette
  • 5660 Answers

SOURCE: need the cylinder head torque settings on a toyota

Tighten in several passes to 44 foot pounds.

I just wanted to add. Since this is an aluminum cylinder head, I hope you loosened the head in the loosening torque pattern. The pattern opposite of the torque tightening pattern. If not, you stand the chance of warping the head.

Again, since it's an aluminum head, it needs to be checked for flatness. Most aluminum heads need to be surfaced before re-installing.

Tightening torque pattern is as follows:

1.The Drivers side of the engine is the Left side.
From the Front going towards the back; the bolts are numbered 10, 6, 1, 3, and 7.
From the Front going towards the back on the Passenger side; the bolts are numbered 8, 4, 2, 5, and 9.

The Exhaust and Intake Camshaft Bearing Cap bolts go to 9 foot pounds. Tighten gradually. One bolt to the other with so many foot pounds, work back, and forth up to 9lbs.

Camshaft Timing Pulley bolts go to 43 foot pounds. (In a tightening sequence, and gradually)

Posted on Jul 25, 2009

emissionwiz
  • 75051 Answers

SOURCE: spindle nut torque spec on a 2004 F-150

u DON'T torque this!! tighten the nut while spinng the rotor, then back off untiol it is free, then tighten it down until it seats tight, then turn another 1/8" tighter, that is it, any tighter u burn up the the wheel bearings

Posted on Feb 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque settings on a yaris 1.3 16v big ends,mains,flywheel,cylinderhead


Toyota Yaris Main and Big end Torque settings:
Tighten the main and big end bolts in sequential order and in two steps.
Main bearings. Stage 1.
22 ft lbs.
Stage 2.
44 ft lbs

Big end bearings.
Stage 1.
11 ft lbs.
Then Rotate bolt head a further by 90 degrees

Head bolt torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Flywheel spec:
65 ft lbs

Jul 15, 2016 | 2007 Toyota Yaris

1 Answer

Find the torque specification for a 2007 corolla windshield wiper arm nut


Good luck finding that torque spec. Tighten it until you can't tighten it anymore.

Feb 21, 2015 | 2007 Toyota Corolla

1 Answer

Hi Please help me with torque settings on toyota corolla 2005 1.6gle


of what the whole car.?
that is in the factory service manual (FSM)
or alldata.com


which engine,? lots of 1.6l MADE BY TOY?
NOT 4AFE (ended in 2001)
state side, we had 3 engine, non are 1.6L
the 1NZ-FE 1.5L
the 1ZZ-FE and 2ZZ-FE both are 1.8L
so what country are you in, ?
find true engine name (under hood,read stickers)
and google for that, I promise you will find it.


9th generation corolla
the e120?
world wide, (not USA) they had
1.6L I4 3NZ-FE
1.6L I4 1ZR-FE
1.6L I4 3ZZ-FE

as you can see 1.6L tells nothing.
only the real name works , getting specs on any engine.
do tell.

Jul 16, 2014 | 2005 Toyota Corolla

1 Answer

1996 toyota tundra spec for flyweel


I`m sure that the manufacturer has one but trust me its not vital.get it good and tight with a ratchet and you`ll be good.I`ve done plenty in 26 years of full time work and never torqued 1

Aug 26, 2012 | 2005 Toyota Tundra 4x4

1 Answer

Wat is the torque settings for the vvt 140 i for the flywheel


what are torque settings for a volvo 2ltr turbo (auto) FLEXPLATE TO CRANK END, then TORQUE CONVERTOR TO FLEX PLATE.

Aug 24, 2011 | 2005 Toyota Corolla

1 Answer

Torquing head


The 98 Corolla has a "torque-to-distance" spec.

First, torque all 10 bolts to 36 ft lbs (49 NM or 500kgf-cm), in a clockwise fashion, starting with the 2 center bolts.

Second, mark the bolts with a paint mark, and then torque each of the 10 bolts an additional 90 degrees.

Hope this helps, and thanks for choosing FixYa.

Nov 15, 2008 | 1998 Toyota Corolla

1 Answer

2001 Toyota Echo Wheel Bolt Torque?


Looks like Corolla and Echo have the same spec. 76 ft-lb.

Aug 25, 2008 | 2001 Toyota Echo

2 Answers

Flywheel bolts torque settings


Check with your local auto parts store. Or buy a repair manual

Jun 07, 2008 | 1999 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...