Question about Cars & Trucks

1 Answer

Wiring a cooker hood lamp holder

Please can someone help me with instructions on how to wire a cooker hood lamp holder. The wires look like push in fittings, but I can't see how to release the old wires

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 90 Answers

First off turn the power to the unit OFF.
On the side where the wires go in there is a small hole take a paper clip push it into the hole and the wire will be released. MAKE SURE THEIR IS NO POWER TO THE UNIT

Posted on Nov 23, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
tripletauto
  • 1450 Answers

SOURCE: horn wiring diagram

fea3a5a.gifa89c7de.gif
here you go please rate me

Posted on Aug 21, 2008

  • 94 Answers

SOURCE: Please help me i need the Lighting Control Module diagram

http://i28.photobucket.com/albums/c216/thomaspedemon/99lcm1of3.gif

http://i28.photobucket.com/albums/c216/thomaspedemon/99lcm2of3.gif

http://i28.photobucket.com/albums/c216/thomaspedemon/99lcm3of3.gif

follow the three links for complete wiring diagram of lcm

Posted on Jun 30, 2009

  • 33 Answers

SOURCE: Towbar Wiring Instructions Ford Focus

On the left inside the boot behind the carpet is a blue connector, this has all of the wires for the rear lights. if you use a test lamp you can identify which wires do what and connect as you go. Use a self tapping screw for earth.

Posted on Sep 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Best (Broan) K260A - I tried to change the bulb as well....completely inaccessible to change with hands (bulb is set deeper in hood, not even flush) tried gloves, rubber jar opener but cannot get access to...


The lamp holder assembly snaps into a hole in the range hood with spring clips. To remove the light bulbs, you simply push and turn, like older, bayonet style automotive turn signal bulbs. It seems you have broken your lamp holder assembly. Just break the trim ring so it can be removed, or you can try to take it out reverse polish style by releasing the spring clips from the middle inwards. Once the trim ring is loose, you can extract the body of the lamp holder through the hole... the wires will be barely long enough to stick out the hole if you are lucky. If you are crafty, you may fashion a repair on the separated lamp socket assembly. If not, your replacement part number is SV16569. just call nutone-broan at 800-558-1711 and they will be glad to ship you a new lamp shell socket trim assembly.
25439092-xipalmoknr3fbjmp51kycajc-3-0.jpg Retail on that part is around $50.

http://cdn.appliancepartspros.com/images/product/cache/broan-light-fixture-assy-sv16569-ap5178165_01_l.jpg

Feb 16, 2015 | Cars & Trucks

1 Answer

How do I remove the rear brake light cover on 1990 GMC Sierra 2500 to change bulbs? Are there clips inside-specific places to pry it off? Thanks


seddy29732_3.jpg I hope these instructions match your model.


  1. Lower the tailgate.
  2. Remove the lamp assembly retaining screws.
  3. Pull the lamp assembly from the truck and disconnect the wiring.
  4. Remove the bulb holder fasteners.
  5. Remove the bulb(s) from the lamp.
  6. Install the bulb, connect the wiring and install the lamp.

seddy29732_4.jpgseddy29732_5.jpgseddy29732_6.jpg

Jun 03, 2011 | 1990 GMC Sierra

1 Answer

On my 2008 ford F350 the driver side mirror marker lights are not working. I need to know how to repair them. Thanks


If it's just that the bulbs that have burnt out you'll need to position the exterior mirror glass inward toward the vehicle.(Note: Use caution to not trap the side lamp assembly wiring during installation, or damage to the wiring may occur.) Using a flat blade screwdriver or something similar, push the mirror side lamp assembly forward while releasing the retaining clip. Separate the bulb holders from the mirror side lamp assembly and remove the side lamp. Replace the bulbs and reassemble. I hope this helps you out.

Mar 08, 2011 | Ford F-350 Cars & Trucks

1 Answer

No revers lights


REMOVAL & INSTALLATION 1988–91 R/V Series
  1. Remove the lens-to-housing attaching screws. Remove the lens.
  2. Replace the bulb(s).
  3. Installation is the reverse of removal.
Except 1988–91 R/V Series Fig. 1: Remove the lamp assembly retaining screws 87986p17.jpg
Fig. 2: Pull the lamp assembly from the truck 87986p18.jpg
  1. Lower the tailgate.
  2. Remove the lamp assembly retaining screws.
  3. Pull the lamp assembly from the truck and disconnect the wiring.
  4. Remove the bulb holder fasteners.
  5. Remove the bulb(s) from the lamp.
  6. Install the bulb, connect the wiring and install the lamp. Fig. 3: Disengage the electrical connection 87986p19.jpg
    Fig. 4: Unfasten the bulb holder retainers 87986p20.jpg
    Fig. 5: Remove the bulb holder 87986p21.jpg
    Fig. 6: Pull this type of bulb from the socket 87986p22.jpg
prev.gif next.gif

Sep 03, 2010 | 1994 Chevrolet Suburban

1 Answer

HOOD OPEN LIGHT STAYS ON. HAVE ALREADY REPLACED HOOD SWITCH.


With the hood open have someone push the switch manually as if the hood is closed and see if the light goes out. If it does the switch is out of adjustment. Readjust the switch and you will be done. If it stays on when doing this you have to check the wiring for a pinched wire.

Dec 28, 2009 | 2008 Chevrolet Impala

1 Answer

Please help me find out how the change a blinker bulb


hi this will be easy if you have slender hands ? open the hood then put your hand down towards the rear of headlamp assy then to the location of indicator area you will feel/see a socket with wires attached this is the bulb holder for f/bulb now hold the holder and twist to left this unlocks holder and you can pull out holder and attached bulb renew bulb this is unplugged in the same way ? and pushed/locked in also then refit bulb holder into lamp assy and check it works? hope this is clear to follow?

Mar 25, 2009 | 2006 Ford Focus

1 Answer

Alfa romeo spider 2001


Subscriber to http://www.alldata.com/products/index.jsp
for the wiring diagram
Try pushing down on the hood while someone pulls the hood release to se if you can get it to pop. If so, lube the hood release with grease where the hood latch joins the front crossmember in front of the radiator.
Good Luck

Jul 31, 2008 | 2001 Alfa Romeo Spider

1 Answer

HOW TO REPLACE HEADLIGHTS ON 2000 CHRYSLER LHS


ATTN: NIKKICARROLL

here is how to replace the bulb in your vehicle


  1. Release the hood latch and open the hood.
  2. Remove the radiator closure panel sight shield as necessary to gain access to the headlamp.
  3. Remove the screws holding the headlamp module halves together.
  4. Separate the module halves.
  5. Disengage the wiring from the headlamp bulb.
  6. Remove the retaining ring from the back of the headlamp bulb.
  7. Pull the bulb from the lamp.
To install:
  1. Push the bulb into the lamp.
  2. Install the retaining ring to hold the bulb in the lamp.
  3. Engage the wire connector to the back of the headlamp bulb.
  4. Place the module into position on the vehicle.
  5. Install the screws to hold the module to the vehicle.
  6. Install the radiator closure panel sight shield.
  7. Check the headlamp alignment and operation.
88176gb1.gif Exploded view of the fog lamp with the bulb removed
Click to Enlarge

  1. Release the hood latch and open the hood.
  2. Remove the radiator closure panel sight shield as needed to gain access to the headlamps.
  3. Remove the screws holding the headlamp module halves together.
  4. Separate the halves.
  5. Remove the fog lamp wire connector cover.
  6. Disconnect the wires from the fog lamp bulb.
  7. Disengage the retainer clip holding the bulb to the fog lamp.
  8. Remove the bulb from the fog lamp.
To install:
  1. Place the bulb into position in the fog lamp.
  2. Engage the retainer clip to hold the bulb to the fog lamp assembly.
  3. Attach the wire connectors to the fog lamp bulb.
  4. Install the fog lamp wires connector cover.
  5. Place the module halves together.
  6. Install the screws to hold the headlamp module halves together.
  7. Install the radiator closure panel sight shield.
  8. Verify the fog lamp operation and alignment

ATTN: WDSNEED1

Removal & Installation 88176g87.gif Remove the screws retaining the headlamp module to the mount adapter
Click to Enlarge

  1. Release the hood latch and open the hood.
  2. Remove the radiator closure panel sight shield as necessary to gain access to the headlamp fasteners.
  3. Remove the screws holding the headlamp module to the mount adapter.
  4. Separate the headlamp module from the mount adapter.
  5. Disengage the wiring from the headlamp and foglamp.
  6. Remove the headlamp from the vehicle.
To install:
  1. Attach the wires to the headlamp and foglamp assembly.
  2. Place the headlamp module into position on the mount adapter.
  3. Install the screws to hold the headlamp module to the mount adapter.
  4. Install the radiator closure panel sight shield.
  5. Check the headlamp alignment and operation.

Jul 28, 2008 | 1994 Chrysler New Yorker

1 Answer

Tow bar wiring


hi! first check the plug on the van,the socket on the car, then the little blue push connectors the fitters use,last but not least the lamp tabs on the lamp holder!

Jul 14, 2008 | 1999 BMW 318 ti

2 Answers

Starting problems


have them check the crankshaft sensor they go bad sometimes and they are when tells the engine to start

Jun 28, 2008 | 1995 Chrysler Concorde

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...