Question about 1993 Toyota Corolla

1 Answer

Headlights do not work after replacing fuse & relay ?

Problem occured when the tilt sterring wheel was actuated

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 34 Answers

The problem maybe there an open circuit between relay to head lamp and inspect the switch continuty

Posted on Dec 05, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

messstat
  • 365 Answers

SOURCE: High beam works, headlight doesn't, fuse & bulb are ok

replace the bulb AGAIN...most likely bulb was bad from the get go.

Posted on Jun 14, 2009

  • 1 Answer

SOURCE: 85 celica GTS convertible - headlights pop ups

I have the same problem. Maybe it the switch unit on the steering wheel?

Posted on Feb 28, 2011

  • 1 Answer

SOURCE: Headlights & tail lights not working on 80

I have a 97 gxl landcruiser diesel everything works except tail lights stop working I've checked fuses ok and bulbs ok. ??????

Posted on Dec 16, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers heaflight goes out sometimes.when the lights aare turned back off and on it stays lit.any sussestions


Hi Owen

Headlights don't work directly from the in vehicle dash switch.

They use very fine wiring to that switch. Not thick enough to supply current to the Headlamps.
Instead, the small switch is used to actuate a magnetic switch with bigger current carrying contacts. Usually close to the Battery & Headlights.
The device is called a Relay.
The contacts are moved by a small low current electromagnet that can be heard clicking.
The contacts in the relay can sometimes get stuck (welded) together which keeps the headlights on when the internal switch is turned off.
Relays are often grouped together in the Fuse Box area.
You can either find the Relay and unplug it and open it up & clean the contacts or strengthen internal spring.
OR
Replace the Relay with another.

12 Volt Car Relays Used In Automotive Industry

RELAY BASICS

Mar 16, 2015 | 2002 Infiniti QX4

1 Answer

1999 dodge durango has no power to sterring colomn, doors,windows,seats or headlights. i was changing heater core n that problem occurred? looking for answers.....


you might have accidentally shorted out the wires resulting in the fuses to get blown, check out the fuses and replace them if blown.

Oct 20, 2011 | 1999 Dodge Durango

1 Answer

All fuses are located under drivers side sterring wheel but the ones I am requesting info with are not listed


do you meen are all the fuses located under drivers side sterring...cause there should be another fuse and relay box located under the hood

Feb 21, 2011 | 2004 Nissan XTerra

1 Answer

Headlights-burnt-out-replaced-fuses-&-ew-uls-oth-still-not-workig-what-else-could-it-e-


Not completely sure your problem. Are you low beams out and your high beams still work? If so, switch relay #46 with relay #45 in the fuse box under the hood. Do your lights now come on? If so, replace the low beam relay.

Dec 06, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

Where do i find the OBD2 fuse?


it sounds to me like its in the ignition switch. if it does it while u are driving take the sterring wheel and pull the tilt handle and lift it up and down. sometimes the wires in the sterring colum go bad and u have to replace the switch because the wires are about a foot long on them. im not compleatly sure so dont go tearing about ur sterring collum till u find out if thats what it is. but yeah try tilting the sterring wheel up and down when it does it and see it it makes a difference.

Nov 18, 2010 | 2007 GMC Sierra Classic 1500HD

2 Answers

Flashing headlights while the car is off


  • Hi! try to check the wirings and also check the fuse for the headlights make sure it is not busted and if you will replace it make sure you use the right fuse amp.
  • Also check the relay if you know how to replace a relay replace it.
  • If you still needs further assistance don't hesitate to reply to this solution.

Jun 15, 2010 | 1998 Oldsmobile Aurora

3 Answers

When i turn on my headlights it blows the fuse but all the other lights work till you turn on the headlights


You have a short to ground somewhere. I would start at your headlights and make sure the wires are in good condition. From there I would look at your switch since it's the most used in the system.

Sep 24, 2009 | 1998 Chevrolet K1500

2 Answers

Headlights in 1990 ford bronco/full size


Bronco uses a RELAY switch under the hood. Is that what you replaced?

Swap it with the A/C RELAY switch (they are the same) to check it.

Sep 04, 2009 | 1990 Ford Bronco

Not finding what you are looking for?
1993 Toyota Corolla Logo

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...