Question about Hyundai Atos

Open Question

Change atos gearbox oil - Atos Hyundai Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does a 2011 caddyTDi250 1.6 ltr need the gearbox oil changed when the vehicle has its regular service?its 5 speed manual gearbox,and is there a filter to be changed?


No but check with the dealer or your service/owner manual for the manufacturer recommended gearbox oil change periods.
There is no filter on the manual gearbox .
Whatever the manufacturer recommended period is for a gearbox oil change, change the gearbox oil twice as frequently as recommended to maintain it in good condition. If, for example, a change every 50000 miles is stipulated then do it every 25000 or so.

Nov 02, 2015 | Cars & Trucks

1 Answer

What can cause a touching or rattling sound


Where is this rattling sound coming from? If it is the transmission, I would check to see if all the gears are properly seated. I would just double check all of the machinery that you took off by removing it again and re-checking the insides of what you replaced and if all is good, replace it again and check.

Feb 24, 2015 | 2007 Hyundai Atos Prime

1 Answer

When car is started , there is a sound like something is touching between engine and gearbox, what could it be


If everything was replaced exactly the way it came out it shouldn't be any unusual noises. Only thing it could be if everything was done properly is the torque converter wasn't seated all the way in the front pump.

Feb 18, 2015 | 2007 Hyundai Atos Prime

2 Answers

What problems are experienced when a crankshaft bush is worn.


The torque converter could have a hair line fracture in it, or the seal could have been nicked while fitting it, hope this helps

Feb 17, 2015 | 2007 Hyundai Atos Prime

1 Answer

How to replace clutch on Hyundai Atos 1.1 (2007)?


Hi Lourence, It takes longer to remove the engine and gearbox, but it certainly makes working on it much easier. I prefer to remove both, which means you can also also inspect parts normally hidden. Pulling out the gear box with the engine in place is easy, putting it back and aligning it is not. The long way is the short way, in my humble opinion. Regards John

May 21, 2014 | Cars & Trucks

1 Answer

Hyundai atos 2005 driving so slowly


have you had the OBD codes read at a garage this may help to point you in the right direction,sounds like a sensor(s)

Apr 04, 2014 | 2006 Hyundai Atos 1.1

1 Answer

How do i remove the gearbox from a hyundai atos prime automatic?


Support the engine, remove ball joints from the lower control arms, disconnect the tie rod ends, remove all cables and wiring from the box. Remove the transaxle or sub frame. Then only the gearbox can be removed.

Apr 04, 2014 | Hyundai Atos Cars & Trucks

1 Answer

How to adjust your clutch cable on hyundai atos prime


Wow, I cannot believe the rubbish answers posted here.
It has a simple cable setup. The slack adjuster is on the end of the cable on the gearbox side. Just where the cable passes through the mounting on the gearbox on its way to the lever.
Just turn it to take up the slack.

Dec 17, 2013 | 2007 Hyundai Atos Prime

1 Answer

Gearbox oil drain plug


Know where the drain plug is but cant find the place to put the oil in at the gearbox Atos gls

Apr 15, 2013 | 2007 Hyundai Atos Prime

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...