Question about Isuzu Trooper

1 Answer

Irretating sound from the fan when the car is on motion especially when changing gears either up or down and the car shows engine cherk sign it sounds as if the fan is touching though its not

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Isuzu Master
  • 42,026 Answers

There should be a viscous fan hub on this car and the noise is an indication that the bearing is failing. Take hold of a fan blade and see if you can move it back towards the engine and forward away from the engine . any movement in the hub is bad. . Check the water pump bearing at the same time in the same way.. Re[lace if there is movement.

Posted on Nov 20, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Its sounds like a thump from back diff

If you have a 4x4 most likely your rear axel bushing is cracked, no big deal, just swing by your nearest Toyota dealer and order it. it goes for about $120. Easy to replace, use wd4 or nutsoff to spray inside the car body a few hours before trying to replace it. The accumulated dirt and road salt make it very hard to take the two long bolts out without a ¨fight¨. Please make sure you use a support jack to hold the rear axel in place when you get the bushing out.
Good luck.

Posted on Sep 21, 2008

  • 6 Answers

SOURCE: 1999 Ford Crown Victoria Starter issue

It sounds like the one way rollers in the starter gear are not holding. The fix is to rebuld the starter, or just replace it. alldatadiy.com will sell you all the information you need on that car for $16.95 a year.

Posted on Nov 29, 2008

Suraido
  • 195 Answers

SOURCE: 2000 mazda bogging in all gears especially in 1st and 2nd gears ?

Judging from what i know, the timing on the engine is probably a bit off, and i remember reading the exact same problem on another web site and that is also what they said. So just check the timing on the engine or have it checked by a mechanic if you don't know how to do it.

Posted on Apr 01, 2009

  • 1 Answer

SOURCE: eps light stays on and engine sounds rough , it is

vw polo epc ligt

Posted on Apr 05, 2010

caroldon
  • 17129 Answers

SOURCE: my toyota corolla nze 2002 has a rattling sound in the gear box

SInce any noise from within the engine/gear box cannot be taken lightly, it is important that you will need a good look from a service shop. If you have been carrying out the scheduled service in accordance with Toyota timings, there will not be an issue. You could check out if the noise is external,otherwise get you car to the authorised Toyota centre for an estimate. This will be better than trying out/ stipping and then waiting for spares. I hope my advise is helpful. good day

Posted on Jul 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Question 1. My 2003 Honda accord vibrates especially when the AC is on and its on drive or neutral gear, but it does not vibrate/shake when its in motion.


Hello,
It sounds as if your Automatic Transmission is having issues. The first thing to do is check the Automatic Transmission Fluid (ATF). This is covered in the Owner's Manual (should be in your glovebox??).

If the level is low, it will cause issues. Your ATF should be serviced every 30,000 miles.

GL,
TD

Apr 28, 2015 | 2003 Honda Accord

1 Answer

My 2004 audi s4 makes gronchy noise when i put it in to 2nd gear when cold whats causing it?


If I've understood your problem correctly.....when changing from 1st gear into second the box is giving a metal on metal crunching sound?
  • This would be the syncromesh ring which is not equalizing the speed correctly.
  • The problem usually happens when there is wear on the same part.
  • Check to make sure that the correct transmission fluid has been used in the box.
  • To alleviate the problem and delay the time when it will require attention, use the double de- clutch method of changing gears, especially when the transmission is cold.
  • The double de-clutch is carried out in the following way.
  1. When in gear and changing from 1st gear to 2nd, change into neutral and release the clutch and then depress again before selecting 2nd gear....It is not required to rev the engine in the neutral position when changing up....
  2. When changing down rev the engine when the shift lever is in neutral for each change.
You'll soon get the hang of it and stop the crunching sound, protecting the box at the same time....
Regards Johngee

Nov 13, 2010 | 2004 Audi S4

1 Answer

When trailblazer is on, i hear a loud squeeking sound. when checking engine i noticed that the radiator cooling fan and pulley move up and down. does not seem to be wobbling at all just moving up and down....


Sounds like your fan clutch is going bad. If you can move the fan by hand then I recommend changing the fan clutch. If it completely fails your fan will be shot through your radiator.

Apr 22, 2010 | 2004 Chevrolet TrailBlazer

2 Answers

I dont have a problem as such--its just that I have put a deposit on a 1997 mazda bongo and having a side conversion fitted prior to delivery. What are the main engine items that I should have checked...


Hi Dennis
Get the cylinder head checked and ensure there are no water leaks around the water pump, heads are expensive for these cars, also check the clutch make sure there is no wobble from the gear stick if manual.and go through the gears while driving up and down them make sure there is no crunching coming down the gears. and check the heating system works.

Hope this is helpful
Regards
Dan

Feb 08, 2010 | 1997 Mazda MPV

1 Answer

2000 mazda bogging in all gears especially in 1st and 2nd gears ?


Judging from what i know, the timing on the engine is probably a bit off, and i remember reading the exact same problem on another web site and that is also what they said. So just check the timing on the engine or have it checked by a mechanic if you don't know how to do it.

Feb 07, 2009 | 2000 Mazda Protege

1 Answer

Engine dies when placed into gear such as reverse or drive


sounds like it may be in the timing i had a car that did that and had to change the timing chain and gears out on it

Jan 23, 2009 | 1992 Buick Century

1 Answer

Heater temperature fluctuates which effects the temp gauge


Sounds like SOUNDS like thermostat and a pressurised coolant flush would be a good place to start that thermostat might be opening and closing due to the above perfect place to start.John

Jan 01, 2009 | 1999 Land Rover Range Rover

1 Answer

Loose speed when going down the road


Sounds like a cv joint has failed. Have you ever noticed a clicking sound while turning and the car is in motion? If so, I am almost certain that one or all of the cv joints have failed. If this proves to be the case, it is a complicated repair and should be referred to a competent and certified mechanic.

Sep 26, 2008 | 1999 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...