Question about Hyundai Cars & Trucks

Open Question

Gear shift indicator bulb - Hyundai Cars & Trucks

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: indicator light for gear shift is out. is it a

might not be just the bulb. could be the cluster. which can be replaced but cost...

Posted on Mar 30, 2010

SOURCE: Replacements for gear indicator bulbs on 2004 Sonata

Hello: The bulb that illuminates the P-R-N-D-L side is available from any good auto parts store; NAPA, A&A, etc. I used a Wagner # W31-2723, it works great and costs $1.59. For the manual / auto shift side ( + - ) visit your local Radio Shack. The bulb is 12V / 25mA, # 272-1141. Remove the bulb holders
with a small flat blade screwdriver inserted into the slot in the bulb holder and
turn 1/4 turn counter-clockwise. The new bulbs must be prepped by removing
the clear heat shrink tubing and CAREFULLY removing the insulation from the
leads. These are extremely fine multi-strand wires and will cut or break VERY EASILY ! Twist the strands of each lead wire well and insert into the
holes in the bottom of the bulb holder, then wrap the lead wires around the
outside of the bulb holder using the four vertical slots just like the original bulbs were wired. Trim off the excess wire ( you don't want to cause a short-
circuit and pop a fuse ) and replace the square plug into the bottom of the
bulb holder. Insert the bulb and holder into the hole in the pc board and give
1/4 turn clockwise to secure. I engineered this little fix after finding out that
the local Hyundai dealer wanted fifty-odd dollars for the bulb/socket/lpigtail
assy. or the pc board with two bulbs and pigtail. I know the wire prep and
insertion proceedure is a bit tedious, but it works great and sure beats paying the dealer's price ! ! !

Gerry Fetters
gmfetters@yahoo.com

Posted on May 02, 2012

hiattsriatt0
  • 11 Answers

SOURCE: How do I replace the gear shift indicator bulb in a 2003 Malibu automatic

Pull the center console around gear shifter and underneath is the bulb you need to replace. Just make sure u are careful cause u cand brake them.

Posted on Mar 22, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 buick lacrosse console gear indicator bulb


Transmission Floor Shift Control Indicator Lamp Replacement

Remove the front floor console. Refer to Front Floor Console Replacement.
Rotate the floor shift control indicator lamp socket (2). Pull the socket from the trim bezel.
Remove the bulb from the socket.

Front Floor Console Replacement

Preliminary Procedures
Remove the rear floor console. Refer to Rear Floor Console Replacement.
Remove the instrument panel lower trim plate. Refer to Instrument Panel Lower Trim Plate Replacement.
Set the parking brake, then shift the transmission into drive and push the shift indicator down until it locks, to allow clearance to remove the console.
1
Front Floor Console Screw (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Tighten
2 N·m (18 lb in)
2
Front Floor Console Bolt (Qty: 2)
Tighten
10 N·m (88 lb in)
3
Front Floor Console Assembly
4
Front Floor Console Retainer Clip (Qty: 2)

Feb 24, 2017 | 2009 Buick LaCrosse

1 Answer

On my ford freestyle gear indicator light how change it


Remove the PRNDL trim ring.
Remove the upper console panel.
Slide the lower shift knob bezel downward.
  1. Remove the bolt and lift up on the shift knob to remove.
Remove the lower shift knob bezel.
Disconnect the light bulb from the PRNDL bezel. an replace .

26002487-w0jffanovav232xjqcbliw5g-1-0.gif Don't think you need take shifter knob off . Just PRNDL trim plate an upper console plate . They should just pull up , use plastic trim tool to get it so you can get your fingers under an pull up carefully .

26002487-w0jffanovav232xjqcbliw5g-1-2.gif PRNDL trim plate

26002487-w0jffanovav232xjqcbliw5g-1-5.gif Light blub connector !

26002487-w0jffanovav232xjqcbliw5g-1-9.gif

Dec 11, 2015 | 2006 Ford Freestyle

1 Answer

How do you change the light bulb for the gear shift on 1997 lincoln town car cartier


you have to take out nearly everything on the dash to get behind there. odds are its a diode and the board may need to be replaced.

Jul 27, 2014 | 1997 Lincoln Town Car

1 Answer

Gear shifting panel light


I am assuming that your shift lever is on the steering column. Either the bulb for indicator has burned out or the shift indicator switch on the transmission has failed. There are 3 different engine options for this truck and 3 different transmissions. I would need to know which engine and transmission your truck has, to give better info. FYI, you have to remove the instrument cluster to replace the bulb, assuming that is the problem.
Charlie

Apr 20, 2014 | 2007 Ford Explorer Eddie Bauer

1 Answer

How do you turn the gear shift light indicator on mazda tribute


The light comes on automatically with the headlioghts, so you may have a burnt out bulb or a wiring problem.

Sep 18, 2012 | 2001 Mazda Tribute

1 Answer

How to change light bulb on console gear shift indicator. Wife can't tell what gear she is in after dark. Automatic trans. 2004 PT-Cruiser


I have 2002 Cruiser, not sure if it's the same configuration. Here's what I did:
Remove the Console: Slide front seats all the way back and recline them all the way to get the armrests out of the way. Pull the emergency brake ALL the way up. Set the gear shift in neutral. Remove the 4 screws in the cup holders front and rear. Remove the rear window controller (pry out gently), then squeeze the tab and pull out each of the 2 connectors. I also have a 12v socket at the front of the console - squeeze the blue tab and pull gently. The console should be free and should lift straight up with a little coaxing.
Remove the Gear Shift indicator assembly: You MIGHT be able to remove the light bulb without doing this, but I couldn't. With a T10 torx screwdriver, remove the 4 screws in each corner. Lift the assembly up as far as practical (a couple inches). The bulb socket under the PRND21 indicator has 2 very small tabs on each side that no normal-sized human being can squeeze together - I pried the bulb socket out of the white 'shroud' with a screwdriver at each tab location (2).
Pull on the black socket. The socket rotates freely and is NOT the normal "turn a quarter turn and it's out" type socket. (That'd be too easy!) The bulb is a standard interior auto bulb. Replace it and reverse the procedure to reinstall. About 30 minutes for this job.

Nov 01, 2011 | 2004 Chrysler PT Cruiser

1 Answer

How do i replace the dashboard light bulb for a 1985 el camino


you need to disconnect the speedometer then remove the 6 or 8 screws that hold the instrument panel to the dash.if its an automatic you will have to unhook the shift indicator cable from the shift colume.then pull the instrument panel out of the dash,turn the panel upside down and you will see the bulb sockets.replace all the bulbs at this time so you won`t have to do this again for another bulb.when hooking up the shift indicator cable make sure it indicates the properly selected gear when moving the shifter to each gear position.

Apr 19, 2011 | 1985 Chevrolet El Camino

1 Answer

How to replace the light bulb under neath the gear shift?


There should be some screws to remove the outside cover of the gear shift. Then the shift indicator P,R, N, D, etc should snap off. Then there is the light bulb housing underneath that indicator.

Jan 19, 2011 | 1997 Toyota RAV4

1 Answer

Odometer n gear shift indicator don't work and i don't know the cause or how to begin to fixing it


if its the manual transmission and the shift light you're talking about, its probably the bulb, is its the auto gear indicator, there is a cable going from the needle on the indicator to the plastic on the steering column (the part that moves with the shifter) make sure it is attached, the odometer is driven with gears, make sure the gears are not broken or derailed.

Feb 28, 2010 | 1988 GMC C1500

2 Answers

Automatic Gear Shifter Light Burned Out


You shifter indicator bulb (194 bulb number) has burned out. Pretty easy and cheap fix. The top of the indicator has to be removed/lifted up and teh bulb needs to be replaced.

Oct 24, 2008 | 2001 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...