Question about 2011 Dodge Durango

Open Question

Blinking blue light attached to my rearview mirror

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to attach rearview mirror


Go to your local auto retailer and you can but special glue that is like superglue, but cures in sunlight. Underneath the mirror there is usually a single screw. Remove that and the mirror releases the plate that sticks to the glass.

Permatex Professional Strength Rearview Mirror Adhesive Walmart com

Oct 01, 2015 | Cars & Trucks

1 Answer

How do i remove and retach my rearview mirror for my hyundai 2004 xg350?


were the mirror attaches to the window you will see a screw. loosen this and slid the mirror off its mount, re assemble in reverse tighten screw until the mirror is firmly attached.

Mar 01, 2015 | 2004 Hyundai XG350

1 Answer

2012 hyundai tucson setting the garage door opener that is located in rear view mirror


Thanks filter4991;
1. Press and hold button on car's rearview mirror
2. Press and hold button on garage door opener's remote control.
3. Light on Rearview mirror will flash rapidly.
4. Release both buttons.
5. Locate learning button on garage door opener (generally this can be found by tracing the antennae to where it is attached to the unit.)
6. Press and release "Learning button"
7. Press and release rearview mirror button repeatedly until garage door opens/closes but it should work the first or second time.

Worked on Genie Intellicode and Hyundai Tuscon

Sep 20, 2012 | Hyundai Tucson Cars & Trucks

2 Answers

What is blinking red light on top of dash board by wind shield and what is green light on rear view mirror for


The Green one on the rearview sounds like an autodimmer. (tints the rearview mirror from bright headlights behind you) & the Red one on the dash could be an alarm warning light

Feb 24, 2011 | 2003 Ford Explorer

1 Answer

How do I attach a review mirror for a 1994 thunderbird lx


Go to an auto parts store and buy rearview mirror adhesive. Your rearview mirror will separate from the small mounting piece that adheres to the windshield. Clean off the glass where it will sit. Follow the directions on the adhesive package and install the mount on the windshield. Once it dries, install the mirror on the mount. Rearview mirror adhesive is one of the most powerful adhesives on the market. Don't use anything but rearview mirror adhesive or the mirror will not hold.

May 21, 2010 | 1994 Ford Thunderbird

1 Answer

How does the rearview mirror fit back onto the windshield?


Just about every rearview mirror is now attached to the windshield with a special glue. Normally there is a metal piece that the mirror stem actually attaches too. To fix this yourself, you want to do is visit a local auto parts store and pickup a kit to reattach the metal piece to the windshield. Do not try super glue, it will not hold. Follow the directions on the kit for an easy repair.

May 03, 2010 | 2003 Pontiac Aztek

1 Answer

Hot to install driver's side rearview mirror '98 Expedition


3 10mm nuts located behind the interior door panel (directly behind the mirror assembly) attach the mirror to the door. Also there you will find the point of attachment for the power as well.

Oct 01, 2009 | 1998 Ford Expedition

1 Answer

Rearview Mirror Adhesive... Mirror is no longer attached to the mirror. Rearview Mirror kit from Advanced Auto Parts didnt work.


The product does work fine, you can try it again. Make absolutely sure that all of the old adhesive has been removed, I use a new, sharp razor to remove the old stuff on both surfaces. Be sure NOT to touch either of the clean areas with your fingers. If you do, take acetone and wipe that part clean. follow the directions and good luck.

Jun 05, 2009 | 1999 GMC Jimmy

1 Answer

Custom Rear view mirror


Hiya...ALL factory-installed rearview mirrors are installed with different wires due to options.
About 6 different rearview mirrors are installed with those options such as On-Star, light, compass, and those features which use different wires....THIS CANNOT be modified with different rearview mirror....**for example, the Equinox owner attempt to pull out a factory-installed base rearview mirror and put in different one that has compass/temperature built into the rearview mirror**

However, the wires are located inside the front headliner which requires removing the sunvisor (and possible removal of interior plastic trim part at the left/right ends of the windshield) prior to pull the headliner down, and a small metal philips or torx screw is used to secure the rearview mirror onto the bracket glued to the windshield.

The best solution is to leave the original factory-installed rearview mirror in place.

May 16, 2008 | 2006 Chevrolet Equinox

Not finding what you are looking for?
2011 Dodge Durango Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...