Question about 2002 Hyundai Santa Fe

Open Question

Torque value for captive bolt on lower ball joint 06 hyundai santa fe

I need to know the torque value for the lower ball joint bolt on a 2006 santa fe 2wd

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1596 Answers

SOURCE: lower ball joints and leaking boots on my 2004 2.7

Labor Skill
Level
Mfg.
Warranty
Standard Axle Shaft Replace Front Axle Intermediate Shaft B 0.9 1.3 Notes NOTE To R&R Inner Shaft Bearing and/or Dust Seal, Add B 0.1 0.1 Notes Axle Assembly One Side B 0.6 1.0 Notes NOTE To R&R Outer Joint and/or Boot, Add Each B 0.0 0.5 Notes To R&R Inner Joint and/or Boot, Add Each B 0.0 0.5 Notes To R&R Axle Shaft Seals, Add Each B 0.0 0.2 Notes Rear Axle One Side B 1.2 1.7 Notes NOTE To R&R Outer Joint and/or Boot, Add Each B 0.0 0.5 Notes To R&R Inner Joint and/or Boot, Add Each B 0.0 0.5 Notes

Posted on Apr 20, 2009

Ad
ghost45
  • 1280 Answers

SOURCE: 2004 hyundai santa fe 2.4

Go to www.hmaservice.com and register your vehicle by VIN #.. you'll then have access to wiring diagrams, shop & owner manuals, service bulletins, campaigns, illustrations and procedures, etc

Posted on Sep 12, 2011

ghost45
  • 1280 Answers

SOURCE: need head bolt torque for

Go to www.hmaservice.com and register your vehicle by VIN #.. you'll then have access to wiring diagrams, shop & owner manuals, service bulletins, campaigns, illustrations and procedures, etc

Posted on Sep 12, 2011

airjer995
  • 5332 Answers

SOURCE: Lower ball joint 2002 hyundi santa fe

Typically these are replaced with a complete lower control arm. What happens is the ball joint is reseeding the lower control arm and rusts. When the old ones pressed out it distorts the opening in the lower control arm. When the new one is pressed in they never fit tight. Anew lower control arm is very easy to replace. 1. Jack up the vehicle on the sub frame or pinch weld. 2. Remove the pinch bolt that holds the ball joint to the knuckle. 3. Separate the ball joint from the knuckle. 4. Remove the two bolts that secure the horizontal bushing to the sub frame. 5. Remove the single bolt that secures the vertical bushing from the subframe. 6. Remove the lower control arm. If you have any questions I'll be happy to answer them.

Posted on Sep 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs on 2004 Hyundai a Santa Fe 3.5 GLS differential cover plate bolts


1 MIN IS CUTTING IT CLOSE BUT YOU SHOULD BE ABLE TO MAKE IT. TORQUE SPECS SHOULD BE 14 TO 15 FOOT LBS.

Aug 18, 2014 | 2004 Hyundai Santa Fe

1 Answer

Front left ball joint for 06' Mercury Montego


The ball joints are part of the lower control arm . The control arm is not extremely difficult, but not easy either. First remove the nut on balljoint, then pull the ball joint out of the knuckle, that may take a pry bar, remove front control arm nut and bolt, and two bolts on rear of control arm bushing, reverse process to install. The Ford workshop manual says to replace the control arm nuts and bolts, but I hardly ever do. Have never had a problem. Torque front bolt to 111 lb-ft, and rear to 73 lb-ft. Hope that is good for you.
KIP. Martin, service manager Ford dealership.

Mar 25, 2014 | 2006 Mercury Montego

1 Answer

Lower ball joint 2002 hyundi santa fe


Typically these are replaced with a complete lower control arm. What happens is the ball joint is reseeding the lower control arm and rusts. When the old ones pressed out it distorts the opening in the lower control arm. When the new one is pressed in they never fit tight. Anew lower control arm is very easy to replace. 1. Jack up the vehicle on the sub frame or pinch weld. 2. Remove the pinch bolt that holds the ball joint to the knuckle. 3. Separate the ball joint from the knuckle. 4. Remove the two bolts that secure the horizontal bushing to the sub frame. 5. Remove the single bolt that secures the vertical bushing from the subframe. 6. Remove the lower control arm. If you have any questions I'll be happy to answer them.

Sep 25, 2011 | 2002 Hyundai Santa Fe

1 Answer

How to change the front lower ball joints?


YOU MAY NEED TO REPLACE THE LOWER CONTROL ARM AND BALL JOINT AS AN ASSEMBLE. AFTER MARKET BALL JOINT ARE AVAILABLE BUT MOST LIKELY WON'T WORK. GO TO THE DEALER TO GET THE PARTS.

Mar 02, 2011 | 2002 Hyundai Santa Fe

2 Answers

Ball joint is about to fall off replace lower ball joint right side 2000 accent


OK< ball joints, they are sometimes bolted on, I hope yours is, you have to get in there to see, But you will also need the parts first, when you buy the ball joint, you will know what you got, either welded to the arm or bolted, then you can take off the arm or the ball joint. Either way, it should be no problem getting the thing off, get the car up, wheel off, don't get your legs under there, get dirty, and you might need another bottle jack to lift up the arm to get the bolts on. Check it out. Hope this helps.

Sep 21, 2010 | 2000 Hyundai Accent

1 Answer

94 grand voyager how to remove lower ball joint. will i damage seal? I am replacing axle but not ball joint. I will use ball joint removal tool


That's the right way and only way to do this, just put some lube on the fork side, that will slide on the ball joint boot when removing joint.

Jul 12, 2010 | 2006 Hyundai Santa Fe

1 Answer

How do I replace the bank 1 sensor 2 oxygen sensor in my 2003 hyundai santa fe?


You will need a 02 sensor SOCKET

Remove it like you would a spark plug

Reinstall new o2 sensor with a little anti seize compound ON THE THREADS ONLY DO NOT GET ANYTHING ON THE SENSOR TIP OR YOU WILL RUIN IT.

Torque to specified value for your model

Reconnect o2 sensor wire

Done.

Apr 02, 2010 | 2006 Hyundai Santa Fe

1 Answer

Lower ball joints and leaking boots on my 2004 2.7 AWD santa fe hyundai how much work


Labor Skill
Level
Mfg.
Warranty
Standard Axle Shaft Replace Front Axle Intermediate Shaft B 0.9 1.3 Notes NOTE To R&R Inner Shaft Bearing and/or Dust Seal, Add B 0.1 0.1 Notes Axle Assembly One Side B 0.6 1.0 Notes NOTE To R&R Outer Joint and/or Boot, Add Each B 0.0 0.5 Notes To R&R Inner Joint and/or Boot, Add Each B 0.0 0.5 Notes To R&R Axle Shaft Seals, Add Each B 0.0 0.2 Notes Rear Axle One Side B 1.2 1.7 Notes NOTE To R&R Outer Joint and/or Boot, Add Each B 0.0 0.5 Notes To R&R Inner Joint and/or Boot, Add Each B 0.0 0.5 Notes

Apr 20, 2009 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
2002 Hyundai Santa Fe Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...