Question about 1989 Toyota Pickup SR5
Runs good at idle engine will not rev past 3000 rpm
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Have you pulled out the spark plugs to see if there are any tell tale signs on them.They are a good indicator of many problems that occur and can save a lot of time isolating the problem.They should all be the same colour.Is the air box and lid properly secured with no leaks or splits in the intake tube.Have you put injector cleaner in the fuel tank to clear up any possible dirty injectors.Therse a few things your problem could be including engine vacuum leak which you can find by lightly spraying carburettor cleaner around suspect places such as inlet manifold and around injector seals.
Posted on Oct 24, 2008
i would first check the timing and if that does not fit i would take the cover back off and look at the belt for a bad or missing tooth
Posted on Feb 14, 2009
SOURCE: my 1987 turbo toyota supra
The throttle position sensor has an idle switch in it that tells the car's computer that the throttle is positioned at idle. If the idle switch sticks in the idle position, the computer will not allow the engine to rev more than 2500 rpm. In your case, I think the switch is stuck.
First, see if you can get the trouble codes to come up. Rig a jumper wire and jump between the "T" terminal and the "E1" terminal in the car's "Diagnostics" box. It is a small black box on the driver's side of the engine compartment near the battery. Open the lid and on the inside of the lid it has a map of the terminals.
Once you hook up the jumper wire, turn the ignition switch to on but do not start the car. If there are codes, the check engine light (orange) will blink the 2 digit code. It blinks the first digit, pauses, then blinks the second digit. The code for the throttle position sensor is code "41". That is, four blinks...pause...then one blink. If this code comes up, change the throttle position sensor. (If there are no codes, the check engine light will steadily blink once per second until you turn the key to off.) Don't forget to remove the jumper wire when you are finished.
Posted on Apr 11, 2009
Tips for a great answer:
Sep 27, 2016 | 2007 Hyundai Santa Fe
Dec 15, 2015 | Jaguar Cars & Trucks
Jul 23, 2017 | 2005 Chrysler Pacifica
Sep 17, 2012 | Cars & Trucks
Jun 05, 2017 | 2001 Hyundai Accent
Feb 07, 2012 | 1991 Mazda 626
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: