Question about Cars & Trucks

Open Question

Replace Oil cooler Opel X25Xe

Oil getting in water

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
rbfaber90
  • 1175 Answers

SOURCE: Good day, I have a 2007 Opel corsa 1.7 cdti. its is mixing water with oil but only on the water coolant side, changed the oil cooler but the issue seem to persist. any help please?

Blown head gasket or cracked block

Posted on Aug 16, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My corsa utility 2006 1.7dti bakkie is pushing dark oil straight into the radiator water bottle. Looked but theres no oil cooler to be found


it is built into the radiator and must have rusted thru . replace the radiator and flush the cooling system thoroughly.

Aug 25, 2016 | Opel Corsa Cars & Trucks

1 Answer

How to replace oil; cooler on this year


  • Service and Repair
Oil Cooler Replacement

Removal Procedure

  1. Raise and support the vehicle. Refer to Vehicle Lifting.
  2. Drain the engine oil and remove the oil filter housing.
89116492

  1. Loosen the oil cooler outlet (1) and the inlet (2) lines from the engine block.
  2. Lower the vehicle.
  3. Remove the intake plenum.
  4. Remove the intake manifold.
89116493

  1. Disconnect the following electrical connectors from the water crossover:
    • The engine coolant temperature sender (2)
    • The engine coolant temperature sensor (4)
84936658

  1. Remove the water crossover bolts (1).
  2. Remove the water crossover upper and lower seals (2).
84942881

  1. Loosen the upper heat shield bolts on the left side of the exhaust manifold.
89116496

  1. Remove the oil cooler outlet line from the engine oil cooler.
  2. Remove the oil cooler inlet line from the engine oil cooler.
84942883

  1. Note the positioning of the 4 seals.
84972057

  1. Position the oil feed and return,lines out of the way and secure with mechanic wire.
  2. Remove the engine oil cooler, inlet and outlet nuts (1).
  3. Remove the engine oil cooler cover bolts (2).
84942883

  1. Remove the engine oil cooler cover.
  2. Remove the engine oil cooler.
  3. Clean all sealing surfaces.
Installation Procedure
84972056

  1. Install the engine oil cooler.
  2. Apply a 2 mm (0.08 inch) bead of RTV silicone sealant, GM P/N 12346240, in the groove around the engine oil cooler cover.
  3. Install the engine oil cooler cover.
Notice: Refer to Fastener Notice in Service Precautions.
84972057

  1. Install the engine oil cooler cover bolts (2). Tighten the engine oil cooler cover bolts to 30 Nm (22 ft. lbs.).
  2. Install the engine oil cooler inlet and outlet nuts (1). Tighten the engine oil cooler inlet and outlet nuts to 20 Nm (15 ft. lbs.).
  3. Reposition the oil feed and return lines.
84942883

  1. Install the oil cooler outlet and install the oil cooler inlet lines to the engine oil cooler. Use 4 new seals.
Tighten the oil feed and return lines to 30 Nm (22 ft. lbs.).
84936658

  1. Install the water crossover:
    • Position the crossover.
    • Install the upper and lower seals (2).
    • Install the water crossover bolts (1). Tighten
Tighten the water crossover bolts to 30 Nm (22 ft. lbs.).
  1. Connect the electrical connectors at the following locations:
    • The engine coolant temperature sensor (4)
    • The engine coolant temperature sender (2)
  1. Install the intake manifold.
  2. Install the intake plenum.
  3. Raise the vehicle.
89116492

  1. Install the oil cooler outlet (1) line to the engine block. Tighten the oil cooler outlet (1) line to 30 Nm (22 ft. lbs.).
  2. Install the oil cooler inlet (2) line to the engine block. Tighten the oil cooler inlet (2) line to 30 Nm (22 ft. lbs.).
  3. Install the oil filter housing to the engine block. Tighten the oil filter housing to 45 Nm (33 ft. lbs.).
  4. Lower the vehicle.

Dec 22, 2014 | 2001 Cadillac Catera

1 Answer

How to replace oil cooler


The problem is NOT your oil cooler, You have a blown gasket. Which is really bad, very expensive to fix. usually means replacing the engine. I REPEAT, IT IS NOT THE OIL COOLER!!!

Jul 24, 2014 | 2003 Pontiac Montana

1 Answer

Opel astra club model.bt it smoke with engine operation what is problem?


gray smoke is water ( check water level )
black smoke is oil (check oil level)
also check if you are parked on an incline, if back of car is up un air then water can sit in the exhaust over night. and it can take upto 2hrs of driving to get it out. this will also give you gray smoke.

Mar 30, 2013 | 1998 Opel Astra 1.8

1 Answer

What's the likely cause for an oilcooler to mix


The passages that the oil runs through inside the oil cooler have likely become corroded and are allowing oil out/coolant in. This has been an ongoing issue with vehicles using extended life antifreeze, particularly Dexcool. The antifreeze becomes corrosive and rapidly wears components that it passes through, i.e. radiator, heater core, oil cooler, etc.

Apr 16, 2012 | 2007 Opel Corsa 1.8

1 Answer

I have a 1998 Cadillac Catera. Oil is going into the radiator. Water is not in the oil, only oil in the water. I have flushed it but the oil level continues to go down and the water continues to get...


Hello: The oil cooler is not in the radiator. The oil cooler is under the intake manifold which has to be removed to replace the oil cooler.

Nov 06, 2010 | 1998 Cadillac Catera

1 Answer

Why is water resevoir keeps getting contaminated,oil cap is clean ,car isn't smoking,look's like gunk in it .


oil is getting into the cooling system through the oil cooler. the oil cooler is located under the intake manifold. After replacing oil cooler you need to flush the cooling system several times to remove all of the oil sludge

Aug 23, 2010 | 1998 Cadillac Catera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...