Stalls while driving?

Hi there : what year make and model, how long do you drive before it stalls? And how long before it starts

Check your crank shaft sensor. You may also try to clean your throttle body.

Usually the problem is due to a dirty throttle body or a faulty idle air control valve. Stalling in reverse and not in drive is unusual.

Vehicle starts but stalls.These types of problems are very common on most of vehicles.There are few possibilities,that can cause stalling problem on vehicle.The vehicle brand and model may differ but problem is same.------I provide you few suggested help link to troubleshoot these issue and solve the problem:-----------
1995 Toyota Corolla: Stalls, Sputters and Pops Through Intake Manifold? http://whatisbyme.blogspot.in/2012/05/1995-toyota-corolla-stalls-sputters-and.html
-------------1994 Toyota 4Runner: Stalls and Stops While Driving? http://whatisbyme.blogspot.in/2012/05/1994-toyota-4runner-stalls-and-stops.html
-----------1992 Chevrolet stalls and shutdown? http://schematicsdiagram.blogspot.in/2012/04/1992-chevrolet-stalls-and-shutdown.html
-----------Dodge Dakota stalls, stumbles at idle. Has low fuel flow and runs hot? http://schematicsdiagram.blogspot.in/2012/03/dodge-dakota-stallsstumbles-at-idlehas.html
------------Engine stalls when gas is given? http://technoanswers.blogspot.in/2012/01/engine-stalls-when-gas-is-given.html
------------1990 mazda 323 stalls and quit running? http://technoanswers.blogspot.in/2012/02/1990-mazda-323-stalls-and-quit-running.html
------------Nissan Pathfinder stalls and bucks on Acceleration? http://technoanswers.blogspot.in/2012/02/nissan-pathfinder-stalls-and-bucks-on.html
------------Car stalls when MAF sensor is connected? http://technoanswers.blogspot.in/2012/01/car-stalls-when-maf-sensor-is-connected.html
-----------Car Engine Stalls While Driving? http://schematicsdiagram.blogspot.com/2011/12/car-engine-stalls-while-driving.html
--------- Stalls And Dies At Stop Sign? http://www.howtobyme.blogspot.com/2012/07/stalls-and-dies-at-stop-sign.html

-----------
These are few help links,that will help you to troubleshoot the issue and solve the problem.Please keep updated,if any more help required.Thanks.

Some possible causes could be:

Vacuum leaks cause an engine to run lean witch can cause the vehicle to stall when put into gear.

Improper base idle adjustment can cause the vehicle to stall when shifted into drive or reverse

A malfunctioning or damaged carburetor can cause the vehicle to stall when shifted into drive or reverse

Improper ignition timing can cause the vehicle to stall when shifted into drive or reverse.

A malfunctioning or damaged transmission or torque converter can cause the vehicle to stall when shifted into drive or reverse

have the egr checked

I have a 1989 5-series BMW which sometimes stalls after changing from reverse to drive. It also sometimes shakes when first driving in reverse before changing to drive.

Fuel pump or fuel filter.

i had the same problem with my 92 exept after mine stalled it wouldnt start for 20 - 30 mins... mine ended up needing a transmission flush for the stalling problem and i tried to drive everyday that helped
hope this helps in some way

I would suggest checking your wiring (core wire on the distributor, plug wires and the negative battery ground) I would imagine that the forward motion of the vehicle is possibly making your wires lose connectivity and making the car stall. Just a thought though.

Carl