Question about 2002 Hyundai Accent
Took the passenger side panel off and Replaced window regulator motor was still good. Window goes up and down quietly from the passenger side. Went to test driver's side control and nothing what do I check for on drivers side
Was regulator bad? did it work from drivers side switch before you did regulator repair?..if so passenger side switch wiring has issue and is not sending signal through it back to the drivers side master switches.. otherwise you need to pin test for power up power down on drivers side switch and repair that if issue going to the window on passenger side.. (possible pinched at door jam area common)
Posted on Nov 20, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Before you replace anything, inspect the connector pins in both the driver's door switch and the passenger door switch. If you don't find any problem with these connector pins, replace the driver's door control switch.
Posted on Oct 04, 2009
I don't know everything there is to know about window motors, but I have seen this before, both mine went out at the same time, not together but a couple weeks apart, like they were dated. Anyway, I replaced both motors, then both operators. Now they both work fine. I would hang on to the old motor, you never know, it might be good, You might have a bad switch on the door, I had to take my switches apart on my other truck and clean the contacts, got both motors working again, Hope this helps.
Posted on Mar 20, 2010
I would suspect the passenger side switch or connector will be the likely solution. As the drivers(master) switch operates independly from any of the passenger doors. Check the connection, and if good replace the switch.
Posted on Mar 29, 2010
The motor is a basic reversable electric motor, you provide power and ground to go one way then reverse it to go the other.
Are you getting power and ground on the wires in both directions ?
Posted on Aug 17, 2012
Tips for a great answer:
Apr 07, 2015 | 2002 Mercury Villager
Mar 19, 2015 | Cars & Trucks
Sep 01, 2014 | Cars & Trucks
Mar 19, 2011 | 2005 Chrysler Town & Country
Oct 11, 2010 | 2000 Dodge Caravan
Jul 28, 2010 | 1997 GMC Sierra K2500
Dec 17, 2009 | Honda Accord Cars & Trucks
Jun 10, 2009 | 2001 Pontiac Grand Am SE
May 30, 2009 | 1999 Dodge Caravan
Aug 12, 2008 | 2001 Mitsubishi Eclipse
568 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: